8156/2020-21/04/E8

Amount

Surface dressing n.exc 15 cm deep in soft /loose soil

Excavation in trenches n.exc 1.5M wide and n.exc 1.5M depth and n.exc 10 Sqm on plan and getting out in any kind of soil complete all as specified and directed.

Excavation over area n.exc n.exc 1.50m deep and getting out in any type of soil complete all specifie and as directed.

All as per item No. 3 above but exc 1.50m and n.exc 3.00 mtr complete all as specified and as directed.

M & L for PCC 1:4:8 type D-2 ( Nominalmix) using 40 mm graded stone aggregate as in foundation filling and similar work complete.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete etc complete.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished square, rectangular or polygonal surfaces of concrete.

Formwork to sides of concrete roof beam, LBs sides and soffits (if any) of similar work; vertical or to batter for rough finished flat surfaces of concrete complete.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work ,vertical or to batter for rough finished flat surfaces of concrete complete.

M&L for rough finished formwork to edges of concrete flats, treads, break in floors, window cills, concrete railings, floor and roof n.exc 20 cm wide and side of RCC/ PCC band in walls, horizantal or sloping or similar work exc 10 cm but n. exc 20 cm wide.

M&L TMT bars 10mm dia and over in reinforcement cut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia all as directed and specified.

M&L TMT bars 6 to 8mm dia and over in reinforcement cut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia all as directed and specified.

TMT bars for reinforcement 5mm to 10mm dia as in stirrups/spacers/binders etc. cut to length bent to shape required including bending cranking and hooking ends and binding with including MS wire not less than 0.9mm(annealed) dia complete all as specified.

M & L for providing RCC M- 25 in foundations, including rafts,footings, foundation beams, plinth beams, bases of columns and similar work complete all as specified and as directed.

M & L for providing RCC M- 25 in columns, pillars, piers, post and struts etc complete all as specified and as directed.

M & L for providing RCC M- 25 in Beams, cantilevers,and lintels and chajja etc complete all as specified and as directed.

M & L for providing RCC M- 25 in Slab supported in walls beams and columns in roof ,Landing, balconies, deck slabs and in shelves and similar work complete all as specified and as directed.

Returning filling in incl spreading leveling, watering, and well, ramming in layer nexc 25 cm in layers complete all as specified.

Removing excavated material to a distance n. exc50 m and depositing where directed at a level n. exc 1.50 m above the starting point.

Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, build in cement mortar 1:4 complete all as specified.

Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, laid dry complete all as specified.

M & L Precast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10cm in width and, setting in cement mortar 1:6 complete all as Specified.

M&L for Rendering 15mm thick in cement mortar 1:6 on PCC block walling or concrete surfaces, finished even and smooth without using extra cement complete.

M&L for Rendering 15mm thick, in cement mortar 1:4 on PCC block walling or concrete surfaces and finished even and fair without using extra cement complete.

M&L for Rendering 5mm thick in cement mortar 1:3 on ceiling surface, finished even and smooth without using extra cement complete.

S&F 2nd class soft wood plain, solid, straight chowkhats and frames, wrought,framed rebated on the solid , rounded or chamfered, put together with glue pinned at joints,complete all as specified and as directed by Engr-in-Charge.

M&L 35 mm thick flush shutter,solid core construction,with block boand core and ply wood face panel,commercial type on both sides complete all as specified and as directed.

S&F 2nd class soft wood glazed/skeleton shutters 30mm thick for window , ventilators etc open rebated prepared to receive glass, gauze etc devided in squares with plain, chamfered or rounded, mitred and rebated sash bars any number with plain, chamfered or rounded, mitred and rebated beads for securing glass gauze etc

S&F mild steel butt hinges medium weight cold rolled of size 100mm .shutters.

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 125mm.

S&F Aluminium anodised barrel tower bolt of extruded section of size 200mm.

S&F Aluminium alloy, anodised sliding door bolt, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sloding bolt of extruded section or cast alluminium alloy of size 250mm

S&F mild steel butt hinges medium weight cold rolled of size 75mm .

S&F Aluminium anodised barrel tower bolt of extruded section of size 100mm

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 100mm fixedcomplete all as specified.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane

M& L for cement concrete 75mm thick type D - 2 1:4 :8 using 40mm graded stone aggregate as in sub base to receive floor finish etc complete all as specified.

M& L for cement concrete 40mm thick type B - 1 1:2 :4 using 20mm graded stone aggregate over sub base to receive floor finish etc complete all as specified.

M& L for glass dividing strips, 3mm thick 38mm wide inserted in position conform to design complete all as specified.

S & F non skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tiles exceeding 0.0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match, over 15mm thick screed bed in CM (1:6) compled

S & F joint free non skid ceramic coloured tiles 7 to 8mm thick area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match, over 15mm thick screed bed in CM (1:6) compled

S&F for Glazed ceramic coloured tiles in vertical surface 300x200x7mm thick , set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 10mm thick backing coat in cm 1:4complete.

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distember including preparity to plastered surface for distempering complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying two coats of white washing and preparity to plastered surface complete all as specified and directed.

M&L for preparation of new plastered surface of of walls and applying two coat of cement base paint on walls complete all as specified and directed.

M&L for screed bed or bedding layers of mortars 15 mm thick with water proofing compound in cement mortar 1:4 laid over concrete surface when concrete is green at roof complete all as specified and as directed.

Supply only Integral Water proofing compound.

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamealle paint over a coat of pink primer

Supply and fixing steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and joints fixed with adhesive complete all as specified & directed.

Supply and fixing steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and joints fixed with adhesive complete all as specified & directed.

S&F gun-metal stop cock 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete

S&F stop valves 15mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

S&F wash basin, Vitreous China white flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and proclain stopper but including brackets .

S&F 32mm spring type PVC waste pipe fixed toWHB urinal etc complete all as specified and directed ( Note minimum length of each pipe should not be less than 0.70RM)

S&F 32mm waste coupling of PTMT (half or full threaded) minium weight 45 gms and fixed complete all as specified.

S&F PVC connection 15mm size with PTMT nuts of length 450 fixed complete all as specified and directed.

S&F Vitreous china Urinal bowl, flat back,size of 465x355x265mm white minium with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securign urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement (excluding flushing cistern, flush pipe) and waste pipe with discharge arrangement complete all as specified fixed in repairs.

S&F urinal spreader of PTMT of any colour for fixing with 15mmdia pipe complete all as specified and directed.

S&F in repairs Viterous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connectoin to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor.

Supply and fix in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia 600 mm long, fixed complete a.ll as specified and as directed.

S&F bib taps,15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S&F 15mm bore pillar tap cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete

S&F rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

M&L for broken stone or boulder hard core of gauge not exc 63 mm deposited spread and levelled in layers not exc.15 cm thick watered and rammed to a true surfaces complete.

M&L for 75mm thick cement concrete 1:3:6 type C - 2, using 40mm graded stone aggregate as in plinth protection and finishing the surface even and smooth with using extra cement complete all as specified.

Supply and fixing 110mm bore SWR pipes single socketed in any length with rubber ring joints fixed to walls ,floors, trenches etccomplete all specified and directed.

Supply and fixing 75mm bore SWR pipes single socketed in any length with rubber ring joints fixed to walls ,floors, trenches etccomplete all specified and directed.

Supply and fixing PVC (SWR )bends (any radius) 110mm complete all as specified and directed.

Supply and fixing PVC (SWR )bends (any radius) 75mm bore complete all as specified and directed.

S&F 75mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all specified and directed.

S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass self 12cm wide with chromium plated brackets guard and railing 60 cm long complete all as specified and as directed.

S&F 300mm long mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

Plain cement concrete 1:3:6 type C-2 using 40 mm graded aggregate for bed to drain pipes including packing under and haunching against the sides of pipe for 150 mm bore after they are laid and tested complete all as specified and as directed.

S&F PVC (SWR) pipes 150 mm dia single socketed in any length with rubber rings joints, laid in trench, or in floors complete all as specifed and as directed.

M&L for Plain cement concrete 1:2:4 type B- 1 (using 20 mm graded stone agg) as in as in haunching benching and PCC coping including necessary form work and set in cement mortar 1:4 complete all as specifed and as directed.

M&L for Precast RCC 1:2:4 type B-1 (using 20 mm graded stone agg) as in manhole's cover slab etc placed in position including necessary form work and set in cement mortar 1:4 complete all as specifed and as directed.

M & L for PCC 1:3:6 type C-2 ( Nominalmix) using 40 mm graded stone aggregate as in foundation filling, mass concrete and similar work complete all as specifed and as directed.

Framed work as in doors or gates of Angle or other section with gusset plates, Rails, braces etc complete including drilling for fixing of steel sheeting or other covering also fastening and fixing completeof Grade Fe 410-W(Fe Gde E-250)

Providing Reinforced cement concrete type B1 (1:2:4) mix using 20mm graded stone aggregates as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses

Formwork to faces of walls rough finished curved surfaces

M&L for PCC 1:2:4 type B2 with using 40mm graded stone aggregate as insurface channel or drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

M&L for three coat of white wash on walls after preparation of new-plastered surface complete, all as specified and directed.

Painting to steel surfaces of any description exc. 10 cm width or girth with two coats of synthetic enamel paint over one coat of red oxide primer incl preparation of new steel surfaces complete.

Formwork to Chajjas through and similar items including edges and similar work complete allas specifiede and as directed.

S & F non skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tiles exceeding 0.0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match, over 15mm thick screed bed in CM (1:6) compled

Excavating over areas, exc 3.0 m and n.exc. 4.5 m deep getting out in hard/dense soil complete.

M&L for reinforced cement concrete Type B1 1:2:4 using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed.

M&L for reinforced cement concrete Type B1 1:2:4 using 20mm graded aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and as directed.

M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter flat rough finished surfaces of concrete complete all as specified and as directed.

M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded agg) as in cover slab for manholes set in CM 1:4 including necessary form work complete all as specified and directed by Engineer in Charge.

M&L for round bars 10mm dia and over in reinforcement cut to length bent to shape required as in MS rungs complete

M& L for cement concrete 100 mm thick type B -1, 1:2:4 using 20mm graded stone aggregate without using extra cement finished even and smooth all as specified.

M&L for preparation of new plastered or concrete surface plain or moulded n.exc 10 cm width or girth etc and applying two coats of synthetic enamel paint over a coat of priming paints plaster complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410W (Gde E-250) quality A

S&F 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws, in roofs, walls etc with grade of zinc coating 275 etc complete all as specified.

S&F 0.63 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

M&L for preparing new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamealle paint over a coat of red oxide complete all as specified

Fire Extinguisher, ABC dry powder type 5 Kgs capacity (fixed to wall with hooks).Make Ceasefire/safexfire/kanexfire

Fire extinguisher CO2/stored type 8Kgs capacity (fixed to wall with hooks). Make sefire/safexfire/kanexfire

Material and labour for point wiring with 1.5 Sqmm copper conductor (Multi-standard) PVC insulated and unsheathed electric cable 1100 volts in and including PVC casing and capping of 25 mm and above (as per conductor run )with all fittings/ accessories and including PVC insulated and unsheathed electric cable 1100 volts1.5 Sqmm ( multi-stranded) copper conductor single core( Green co lour) cable as continuous earth wire connected to common earth dolly including 50 mm deep box made of 2nd class hard board of required size and shape etc covered with 3 mm thick plastic laminated sheet ( Make Hylum) for one light point independent controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 104 above, but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 104 above, but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 104 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing switch piano flush button single pole one way 5 Amps complete

Supply and fixing switch, socket combination 2 in 1, 5 Amp, flush type completeall as specified and as directed by Engr-in-charge.

Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5A/16A, 5 in 1 flush type complete all as specified and as directed by Engr-in-charge.

Supply and fixing angular lamp holder, PVC/Polycaronate type with back plate suitable for 9 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge.

Supplying and fixing LED 9 Watt Make: Philips/ Crompton/Havells.

Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing Batten for LED tube light 1x18W LED including making suitable connection of tube light fitting to ceiling rose by 23/0.0076 copper flexible wire all as specified and directed at site by Engineer in Charge.Cat part No 112181,BLRB-DB 118. Make : Bajaj or equivalent in Philips, Havells.

S&F LED tube light 1X18Watts Cool White LED complete with ultra bright very efficacy suited for installation in Batten for LED tube light 112181 BLRB-DB 118 all as specified and directed at site by Engineer in Charge.Cat part No 112066 BLRB 18W CW. Make Bajaj or equivalent in Philips, Havells.

S&F Energy saving new generation Bulkhead luminaires 10W LED BIBWP with opel diffuser WEE PLUS specially designed gasket complete all as specified and directed by Engineer in Charge. Cat part No 112334 or equivalent in Philips, Havells.

Supply and fixing sheet Metal enclosure double shutter type for DB’s 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar complete including wooden board of required size duly painted with matching colour paint all as specified and as directed by the Engr-in-charge.

Supply and fixing MCB single pole and neutral 35to60 Amps , 240 volt, 10 KA, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing MCB single pole 5 to 30 Amps, 240 volts, 10 KA complete all as specified and as directed by the Engineer-in-Charge.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 1991 Part-I and connecting to CBDB’s as specified or indicated including testing on completion .

Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor 1100 V grade nominal cross sectional area 10 Sqmm, 2 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-Charge

Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified.

Material and labour for sand cushioning to under ground electric cable all as per clause No 19.75 of MES SSR Part-I (2009)

M/S TRADE LINK

M/S GEE AAR and SONS ENTERPRISES