SPECIAL REPAIR TO DRAINAGE SYSTEM IN DOMESTIC AREA AT AF STN GWALIOR

Amount

Surface Excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft/ Hard soil etc complete all as specified and directed.

M&L hardcore of gauge n exc. 63mm broken stone , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc,complete all as specified and directed.

M&L for plain cement concrete type 1:4:8 D2, (using 40 mm graded stone aggregate) as in foundation, mass concrete and fillings complete all as specified.

M & L for Sand filling under floors or in foundations including watering and consolidation etc copmlete all as specified and directed. Note: Punned/consolidated thickness shall be measured and paid.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment laid in floor and joints of interlocking tiles/ paver block to be filled with fine sand and broomed etc complete all as specified and directed.

M&L for Plain cement concrete 100 mm thick, 1:2:4, type B-2(using 20 mm graded stone aggregate) and finishing the surface even and smooth without using extra cement as in flooring/hard standing/paving complete all as specified and directed.

M&L Forming contraction (Dummy) joints 100 mm deep x 10 mm wide, filled with sealing compound of grade A complete all as specified and directed.

Excavation in trenches in sof/loose soil n exc 1.5 M wide & n exc 1.5 M in depth as in and getting out in soft/loose soil for shafts, wells, man holes and for sewage lines and foundation etc n exc 10 Sqm on plan all as specified.complete all as specified and as directed by the Engineer-in-charge

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

Taking down cement / lime plaster on brick or concrete surfaces etc including racking out joint, hacking for key screbbing down with water etc.complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 etc complete all as specified and directed.

M&L for Rendering 15mm thick on brick work or concrete surface on wall in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plaster on brick wall surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and directed Note : Make of cement base paint and primer shall be same

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching ,kersbs, bed blocks and like etc complete all as specified and directed

M&L PCC 1:2:4 type B-1using 20 mm graded stone aggregate as in drains and surface channels and finishing complete all as specified and directed by Engineer-in-Charge.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, initred/stopped ends complete all as specified and directed.

Cleaning of existing drain of any size or shape by removing sludge /silt/ earth (liquid, semisolid & solid) completely and removing the rubbish to a distance exc 250 m but not exc 500 m and deposited where directed.

Cleaning away all grass vegetation, saplings, shrubs , brush wood under growth and roots and trees not exc 30cm girth (Measured one meter above ground level) for making approach and around drains/path/sewage lines and locations as directed and required by Engr-in-charge ancl removing rubbish upto a distance of 50 mtr out side the periphery of the area under clearance complete all specified and directed.

M&L TMT bars 10 mm dia cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for precast RCC 1:1.5:3 type A 1 as in cover slab and like for manhole/ drains and like with plane faces complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material soil exc. 250m but n exc 500 m & depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

M/S NIRMAL SINGH DHANJAL

M/s Subhash Construction Co.

Kumar Sales Corporation

Lall Electronics

SHRI RAM CONSTRUCTION

JNK BOND

M/s Raaj Construction Co.

M/s Shubham Construction Co.

DEEPAK SHARMA

M/S YOGANSH CONSTRUCTION CO.