Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance 6 VANARAI SHOPPING COMPLEX W E HIGHWAY GOREGAON E MUMBAI 400065 | MUMBAI SUBURBAN | MAHARASHTRA | 400065 | Admitted-Finance |
Tender Value
₹33.1 L
EMD Value
₹66,140
Closing Date
26 Mar 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Project Director, INRPC, NRB, BARC TARAPUR
Project Office, INRPC, BARC, Tarapur, Maharashtra, 401502
SITC of off Load 1000A, 433V 4 pole Manual Change Over Switch Panel for Outdoor application and assorted works at INRP Site, Tarapur.
2024_NRB_798753_1
BARC(T)/NRB/INRPC/ELE-42/ 2024/490
Open Tender
Electrical Works
Item Rate
240 days
INRPC, NRB, BARC Tarapur
Refer Tender Documents
3 documents required · 3 mandatory
₹0
₹66,140
Project Office, INRPC, BARC, Tarapur, Maharashtra
3 May 2024
7 Mar 2024
27 Mar 2024
7 Mar 2024
26 Mar 2024
14 Mar 2024
7 Mar 2024 - 12 Mar 2024
13 Mar 2024
Amount
Design, manufacture, assembly, testing at manufacturer's works, delivery at site of outdoor type (IP 55), free standing, floor mounted, double door with locking arrangement Manual change-over switch with suitable extension for 2 nos. of Incomer (3.5Cx400 sqmm Al Cable 6 runs) , 1 no. of Outgoing (3.5Cx400 sqmm Al Cable 3 runs) each rated for 433 V,1000Amps and 1 no. of 250 Amp MCCB outgoing feeder ,(Including N) 4-poles, 50Hz,Panel fabricated out of Pregalvanized G. I sheet steel , powder coated, dust and vermin proof with operating mechanism between the poles,Open transition with stable OFF position,I-O-II –operation where the handle is padlockable in all positions and door interlock available in the I- and II-positions Complete with all the accessories such as pistol handle,shaft and bolt set for the cable connection and spares as per technical specifications
Installation, Testing and commissioning at site of Item No. 1 as per technical specifications
Supply of brass double compressor weatherproof glands and Al lugs for 3.5C x 400 Sq.mm, Multistranded, XLPE insulated,round wire armoured, 1.1 kV grade Al cable as per attached technical specifications.
Glanding and End Termination of 3.5C x 400 Sq.mm, Multistranded, XLPE insulated,round wire armoured, 1.1 kV grade Al cable as per attached technical specifications.
Supply of straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for 3.5 C X 400 sqmm cable of 1.1 kV grade as required.
Making of straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for 3.5 C X 400 sqmm cable of 1.1 kV grade as required.
Excavation in all type of soils to a depth of 1000 mm below ground level, sand bedding, laying of baked bricks on side and top of each run of cable, back filling, consolidation shoring. Item includes Supply of sand and class - 1 bricks.
Laying and Dressing of 3.5CX400 sqmm A2XWY Cable in the excavated ternch (boq item No.7)
Removal of Glands and end termination of 3.5C x 400 Sq.mm, Multistranded, XLPE insulated,round wire armoured, 1.1 kV grade Al cable from the existing outgoing feeder of 415V, 800 Amps as per attached technical specifications.
10W, LED Bulkhead with a nominal system lumen output of greater than 1100 lumens and a minimum system efficacy of 110 lm/W. The luminaire should have a color temperature of 6500K and CRI > 70. The luminaire shall meet IP66 rating and IK 09 rating with THD < 10% and PF > 0.95. The initial chromaticity <5. Median useful life L70B50: 50,000 hour(s) .The luminaire housing should made of High pressure die cast Aluminium with wall mounting bracket.
Supply
Installation
Supply and Installation of Following Copper Power Cables 2XWY (P), Multistranded, round wire Armoured, XLPE insulated, cores laid up with inner sheath and outer sheath FRLS PVC (ST-2 type), of 1.1 kV grade as per IS 7098 (part - 1) 1988.
4C x 16 Sqmm. Supply
4C x 16 Sqmm. Installation over cable tray/ surface with clamp/ through conduit/casing-caping
3C x 1.5 Sqmm. Supply
3C x 1.5 Sqmm. Installation over cable tray/ surface with clamp/ through conduit/casing-caping
3C x 2.5 sqmm Supply
3C x 2.5 Sqmm. Installation over cable tray/ surface with clamp/ through conduit/casing-caping
Supply and installation of 25mm GI Flexible conduit
Supply
Installation on surface/over false ceiling
SITC of continous duty industrial type Single phase exhaust fan, 450mm sweep , min 1400 rpm and air delivery of min 6100 cubic meters per hour and max power consumption of 400 watts with frp duct having SS bird cage and as per the technical specifications
Supply
Installation, Testing and Commissioning
Underground Laying and dressing of 3C x 400 Sq. mm 33 kV(E) grade aluminium conductor, XLPE insulated, PVC sheathed, GI round wire armoured power cables as per technical specification.
Making of Outdoor straight through cable jointing kit of heat shrinkable type complete with all accessories including ferrules suitable for the size of 3 Core, 400 Sq. mm, XLPE Aluminium conductor cable of 33 kV grade as required.
Core cutting in RCC beyond 200 mm up to and including 250 mm Dia
Making of Indoor Cable End Termination with Heat Shrinkable jointing kit complete with all accessories including lugs suitable for size of 3C, 400sqmm, XLPE, Aluminium Conductor cable 33 kV grade as required
Supply of 95 sqmm stranded bare tinned copper conductor in RCC trench / underground upto a depth of 1 mtr, connection with earth pit at one end including clamping, brazing, connection etc. as per the instructions by Engineer-in-charge.
SARASWAT ENGINEERING SERVICES
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .