Loading…
Loading…
Tender Value
₹7.0 Cr
EMD Value
₹13.9 L
Closing Date
16 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
EAST
16 conditions · 4 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less crores; where; V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Note: - Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing oftender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.
In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, 1.1.1 bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Construction/repairs/maintenance of any Civil Engineering Works.
46 conditions · 6 needing a document upload
Special Mandatory Condition on Similar Nature of work for Technical Eligibility Criteria :Tenderers has to submit the certificate duly mentioning the certificate to be taken for eligible technical qualification. If the tenderer does not mention it clearly, the offer may not be considered for technical criteria of eligibility. If the credentials submitted by the tenderer from combined nature of work, which is not specifically matching for the similar nature of work stipulated by the Railway for the tender, the tenderers should enclose the work completion certificate in support of Technical Criteria of Eligibility clearly mentioning the completed value of the similar nature of work from the certificate of the combined work duly enclosing the bill copy. Also, in a separate covering letter, the completed / paid values of items covered for similar work in the credential of combined work should be submitted duly mentioning the reference of similar nature items from the bill copy enclosed. For Example, if the similar nature of work stipulated for a bridge rebuilding work is "Execution of works of construction of bridges/rebuilding of bridges or regirdering of bridges/launching of slabs under the running track" Against the similar nature of work, if thecredential submitted by the tenderer is related to road work combined with bridge works, they should submit the credential with clear cut completed/paid value of the bridge work from certificate issuing authority along with a covering letter by the tenderer with last paid bill copy stating the paid values of items covered for bridge work in the credential of combined work duly mentioning the reference of bridge related items from the bill copy enclosed. If the bidders failed to enclose documents as per these guidelines, the offers shall be considered as invalid and summarily rejected"
Annexure-V(A) (if applicable) should be filled in and submitted in the given Commercial compliances for declaration that the Firm/ HUF / JV / LLP is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. Note: If the certificate of Annexure-V(A) has not been submitted separately as per the same content in the given format of enclosed general conditions, the offer shall be summarily rejected.
All mandatory documents as per Provisions contained in Clause- 10, 14, 15, 16, 17 & 18 of Part I of General Conditions of Contract - 2022 as applicable are submitted.
Whether EACH PAGE of the copy of documents/certificates in support of credential is self-attested/digitally signed by tenderer/authorized representative with signature, stamp & date.
Whether all the documents related "Mandatory Requirement" as applicable, according to GCC along with all corrections slips from time to time and mentioned in the tender documents are enclosed with the tender.
Whether the Tender Form (First Sheet) in the tender documents is properly filled and submitted along with tender.
The tenderer(s) should submit the BID SECURITY in acceptable form i.e. only through net banking or e-payment gateway or submitted as Bank Guarantee Bond from a Scheduled Nationalized bank of India or as mentioned in the tender documents. The Bank Guarantee Bond shall be as per Annexure- VI(A) and shall be valid for a period of 90 days beyond the bid validity period. (NOTE: For submission of Bid Security in the form of Bank Guarantee, all the procedures mentioned at Para-5 Bid Security (3) (I) to (VIII) of GCC should invariably be followed.)
Please submit the certificate of familarisation to the work as per the Annexed document.
Employment/Partnership etc. of Retired Railway Employees: (a) Should a tenderer i) be a retired Engineer of the gazetted rank or any other gazetted officer working before his retirement, whether in the executive or administrative capacity or whether holding a pensionable post or not, in the Engineering or any other department of any of the railways owned and administered by the President of India for the time being, OR ii) being partnership firm / joint venture (JV) / registered society / registered trust etc have as one of its partners/members a retired Engineer of the gazetted rank or any other gazetted officer working before his retirement, OR iii) being an incorporated company have any such retired Engineer of the gazetted rank or any other gazetted officer working before his retirement as one of its directors AND in case where such Engineer or officer had not retired from government service at least 1 year prior to the date of submission of the tender THEN the tenderer will give full information as to the date of retirement of such Engineer or gazetted officer from the said service and as to whether permission for taking such contract, or if the Contractor be a partnership firm or an incorporated company, to become a partner or director as the case may be, has been obtained by the tenderer or the Engineer or officer, as the case may be from the President of India or any officer, duly authorized by him in this behalf, shall be clearly stated in writing at the time of submitting the tender. b) In case, upon successful award of contract, should a tenderer depute for execution of the works under or to deal matters related with this contract, any retired Engineer of gazette rank or retired gazetted officer working before his retirement in the Engineering or any other department of any of the railways owned and administered by the President of India for the time being, and now in his employment, then the tenderer will ensure that retired Engineer or retired gazetted officer had retired from government service at least 1 year prior to the date of his employment with tenderer and in case he had retired from service within a year then he possesses the requisite permission from the President of India or any officer, duly authorized by him in this behalf, to get associated with the tenderer. c) Should a tenderer or Contractor being an individual, have member(s) of his family or in the case of partnership firm/ company / joint venture (JV) / registered society / registered trust etc. one or more of his partner(s)/shareholder(s) or member(s) of the family of partner(s)/shareholder(s) having share of more than 1%in the tendering entity employed in gazetted capacity in the Engineering or any other department of the railway, then the tenderer at the time of submission of tender, will inform the authority inviting tenders the details of such persons. Note: -If information as required as per 8.a), b), c) above has not been furnished, contract is liable to be dealt in accordance with provision of clause 62 of the Standard General Condition of contract.
The tenderer whether sole proprietor / a company or a partnership firm / registered society / registered trust / HUF / LLP etc. if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate. The tenderer should have to submit Power of Attorney along with his offer stated above.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii) The Other documents to be submitted in support of the above as per Clause No. 14 (ii) of GCC-2022. (iii) If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole Proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having been submitted by the individual who has signed the tender. (iv) After opening of the tender, any document pertaining to the constitution of Sole Proprietorship Firm / Partnership Firm / Registered Company/ Registered Trust / Registered Society / HUF/LLP etc. shall be neither asked nor considered, if submitted. Further, no suo-moto cognizance of any document available in public domain (i.e., on internet etc.) or in Railway's record/office files etc. will be taken for consideration of the tender, if no such mention is available in tender offer submitted. (v) A tender from JV shall be considered only where permissible as per the tender conditions. (vi) The Railway will not be bound by any change of power of attorney or in the composition of the firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
The tenderers shall submit a copy of certificate in case of other than Company/Proprietary firm, Annexure-V(A) shall be submitted by each member of a Partnership Firm/Joint Venture (JV)/Hindu Undivided Family (HUF)/Limited Liability Partnership (LLP) etc. as the case may be. Non-submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. Note: If the certificate of Annexure-V(A) has not been submitted separately as per the same content in the given format of enclosed general conditions, the offer shall be summarily rejected.
The Tenderers have to fill in the details in TENDER FORM FIRST SHEET attached in the Documents Column and upload the same. Non-compliance with the conditions set forth therein above is liable to result in the tender being rejected. (Please Click on Tender Notice No. to go to Documents Column for "TENDER FORM FIRST SHEET").
Electrical works shall be executed by contractor/Subcontractor having a valid electrical Contractor's License, under the direct supervision of a person holding a certificate of competency and by a person holding a permit issued or recognized by Government. The Electrical Contractor's License, Competency Certificate and permit shall be of appropriate voltage level in commensurate with the scope of electrical works in composite tender. Before execution of electrical works, working drawings should be submitted for approval of Sr. DEE(G) or his authorized representative. If tenderer fail to submit the supporting electrical license of appropriate voltage level, the tenderer offer will be summarily rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Provision of Track Machine siding Amentities at Nellimarla, Urlam & Pundi station Yards along with Construction of Tower wagon shed suitable for 8 Wheeler Tower Wagon at Srikakulam yard and Renovation of Station Master's office at Jhadupudi (JPI) station.
eT-EAST-VSKP-05-2026~SCOR
eT-EAST-VSKP-05-2026
Open
Works - General
12 Months
Visakhapatnam, Andhra Pradesh
₹0
₹13.9 L
26 Aug 2026
26 Aug 2026
2 Sept 2026
267 items across 5 schedules · ₹7,05,91,289.16 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum 3500 | — | 197.9 | 6,92,650 |
| 2 | All kinds of soil. | cum 963 | — | 260.3 | 2,50,668.9 |
| 3 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum 543 | — | 7,878.5 | 42,78,025.5 |
| 4 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum 280 | — | 7,178.75 | 20,10,050 |
| 5 | Foundations, footings, bases for columns | Sqm 1313 | — | 392.15 | 5,14,892.95 |
| 6 | cum | 6 | 11,505.5 | 69,033 | |
| 7 | Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 9 | 20,355.8 | 1,83,202.2 |
| 8 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum 263 | — | 8,962.35 | 23,57,098.05 |
| 9 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm 35 | — | 1,267.95 | 44,378.25 |
| 10 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg 875 | — | 238.35 | 2,08,556.25 |
| 11 | 100x60x2.50 mm | Each 11 | — | 106.35 | 1,169.85 |
| 12 | 150x10 mm | Each | 7 | 82.55 | 577.85 |
| 13 | 125 mm | Each | 7 | 66.25 | 463.75 |
| 14 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. | Metre 18 | — | 492.7 | 8,868.6 |
| 15 | 30 mm thick pre laminated PVC door shutters | Sqm | 6 | 3,663.8 | 21,982.8 |
| 16 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg 6125 | — | 133.7 | 8,18,912.5 |
| 17 | Using flats 30x6 mm for diagonal braces and central cross piece | Sqm | 9 | 5,563.75 | 50,073.75 |
| 18 | Hot finished welded type tubes | Kg 1750 | — | 194.4 | 3,40,200 |
| 19 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm 2975 | — | 614.2 | 18,27,245 |
| 20 | Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. | Sqm 2800 | — | 83.85 | 2,34,780 |
| 21 | Dark shade pigment using ordinary cement | Sqm 875 | — | 1,119.5 | 9,79,562.5 |
| 22 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 9 | 1,096.55 | 9,868.95 |
| 23 | 110 mm diameter | Metre 210 | — | 377.4 | 79,254 |
| 24 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm 32 | — | 738.65 | 23,636.8 |
| 25 | 1:4 (1 cement: 4 coarse sand) | Sqm 1400 | — | 411.75 | 5,76,450 |
| 26 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm 88 | — | 185.65 | 16,337.2 |
| 27 | With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood | Sqm 525 | — | 74.65 | 39,191.25 |
| 28 | Two or more coats on new work | Sqm 1050 | — | 155.9 | 1,63,695 |
| 29 | Two or more coats on new work | Sqm 1050 | — | 146.8 | 1,54,140 |
| 30 | Old work (one or more coats @ 2.20 kg/10 sqm) complete. | Sqm 1750 | — | 75.8 | 1,32,650 |
| 31 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum 132 | — | 2,434.25 | 3,21,321 |
| 32 | On bituminous surface @ 0.50 Kg / sqm | Sqm 700 | — | 48.2 | 33,740 |
| 33 | With paving asphalt grade VG - 30 with no solvent | Sqm 700 | — | 568.6 | 3,98,020 |
| 34 | Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete. | Sqm 700 | — | 88.55 | 61,985 |
| 35 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acrylonitrile ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. | Each 88 | — | 206.3 | 18,154.4 |
| 36 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. | Sqm 53 | — | 747.8 | 39,633.4 |
| 37 | Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material within all lifts and lead upto 1km (by mechanical means). | Sqm 700 | — | 7 | 4,900 |
| 38 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 2 | 6,515.55 | 13,031.1 |
| 39 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 2 | 2,648.85 | 5,297.7 |
| 40 | 10 litre capacity - White | Each | 2 | 1,190.65 | 2,381.3 |
| 41 | 32 mm dia | Each | 2 | 119.55 | 239.1 |
| 42 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | Each | 4 | 53.25 | 213 |
| 43 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 2 | 1,607.95 | 3,215.9 |
| 44 | Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms | Each | 2 | 122.4 | 244.8 |
| 45 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 2 | 708.95 | 1,417.9 |
| 46 | 25 mm dia nominal bore | Metre 613 | — | 551.7 | 3,38,192.1 |
| 47 | 25 mm nominal bore | Each | 6 | 622.4 | 3,734.4 |
| 48 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre 8750 | — | 11 | 96,250 |
| 49 | 15mm nominal bore | Each | 4 | 574.3 | 2,297.2 |
| 50 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 7 | 125.6 | 879.2 |
| 51 | 25 mm nominal bore, 152mm long, weighing not less than 440 gms | Each | 2 | 523.8 | 1,047.6 |
| 52 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Each | 7 | 12,770.55 | 89,393.85 |
| 53 | 300 mm dia | Metre 105 | — | 1,695.1 | 1,77,985.5 |
| 54 | 150 mm nominal size dia | Metre 105 | — | 793.25 | 83,291.25 |
| 55 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. | Hour 42 | — | 1,085.05 | 45,572.1 |
| 56 | 150 mm dia | Each 32 | — | 246.45 | 7,886.4 |
| Item- 2 | Schedule of Rates | (DSR) | for TM | siding | |
| Schedule total | ₹1,78,37,939.1 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022_1.pdf
ATTACHMENT
TenderFormFirstSheet.pdf
ATTACHMENT
Annexure-VandAnnexure-VA.pdf
ATTACHMENT
Annexure-VI.pdf
ATTACHMENT
AnnexureVIA.pdf
ATTACHMENT
e BG Railway Brd letter
ATTACHMENT
Graduate Diploma Engineer
ATTACHMENT
GuidelinesforprotectionofCables.pdf Protection of Cables SandT
ATTACHMENT
PoliceVerificationforcontractStaff.pdf PoliceVerificationforcontractStaff
ATTACHMENT
RevisionofConservancyCessCharges
ATTACHMENT
SpecialconditionsCementSTEEL.pdf
ATTACHMENT
CertificateofFamiliarization.pdf
ATTACHMENT
GCC2022ACS1to12.pdf
ATTACHMENT
DLP-Buildings-LHS-ROB-RUB.pdf
ATTACHMENT
NMLElecExplanatoryNotes.pdf
ATTACHMENT
ULMElecExplanatoryNotes.pdf
ATTACHMENT
PUNElecExplanatoryNotes.pdf
ATTACHMENT
TowerwagonCHE.pdf
ATTACHMENT
JPIElecExplanatoryNotes.pdf
ATTACHMENT
Acceptanceofe-BankGuaranteee-BG.pdf
ATTACHMENT
Graduate-DiplomaEngineerRegards.pdf
ATTACHMENT
GuidelinesforprotectionofCables.pdf
ATTACHMENT
PoliceVerificationforcontractStaff.pdf
ATTACHMENT
RevisionofConservancyCessCharges-2021.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].