8495 REPAIRS REPLACEMENT OF SEWAGE LINES MANHOLES AND DAY TO DAY COMPLAINTS OF OTM AND MD ACCN REPAIR MAINT OF DRAIN FOOTPATH HARDSTANDING AND RAIN WATER HARVESTING OF NEW HOSP COMPLEX (SC) UNDER AGE BR III OF GE SOUTH PUNE

Amount

Cleaning of sewage system on day to day basis including blocked WCs, blocked WHB outlet , bottle traps, nahani traps, floor traps, gully traps, soil/waste pipe running on external walls of building including junctions in running / flowing condition without any disturbance and removing all types of blockages of any description in any situation manually or mechanically and disposal off of the sludge / waste materials outside the Defence land by deploying 02 (TWO) safaiwala per day (All working days) complete all as specified and directed by Engineer-in-charge. Note :- (i) Complaint handed over till 1700 hrs shall be completed on same day. (ii) If safaiwala not attended the complaint within the time frame as mentioned above, 50% of quoted rate shall be deducted from the contractor’s dues as a penalty. (iii) The contractor shall be responsible to maintain daily job completed by safaiwala deputed by him in the subject work and obtain the signature of I/C complaint cell / Engr-in-charge daily at 1700 hours on all working days for the command hospital (SC) complex. (iv) Attending of one complaint and make it functional shall be measured as one Job.

M&L for Cleaning and rodding of blocked sewer lines, of any depth and any type and any dia of sewer line (ie branch sewer line, main sewer line) by way of cleaning desludging foreign material as well as rodding of sewer line between successive manholes mannually or pumping out sewage from blocked manhole including desludging where required and ordered by Engineer-in-Charge and keeping sewer line functional entering from floor trap, water closet, soil waste/ vent pipe, gully trap upto final drop / outlet complete all as specified and directed by Engineer-in-charge.

M&L for cleaning & clearing of underground sewage line of any dia including manholes by taking off manholes covers and re-fixing the same after cleaning of any description, underground of any depth by removing any type of blockage including de-silting and de-chocking with and including combined high pressure water jetting cum suction (vacuum) type machine mounted on LCV/HCV and having facilities of high pressure water thermoplastic fiber brailed water jetting hose and through conical / round shape nozzler pipe and flushing after cleaning including clearing of manholes (Sludge/sludge water shall be disposed off at authorised dumping site declared by local administration outside MD land complete all as directed by Engineer-in-Charge. Note :- (i) Cleaning & clearing of underground sewage line from manhole to manhole including cleaning one manhole and make it functional shall be measured as one Job. (ii). The contractor shall bring the high pressure water jetting cum suntion type machine mounted on LCV/HCV with in 48 Hrs at site after requirement as notified by the Engr-in-Charge and the cost of bringing & hiring the high pressure water jetting cum suntion type machine shall be deemed to be included in unit quoted rates.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations and getting out in in soft / loose soil, complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, and getting out in in hard/dense soil, complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth for foundations, and getting out in soft/disintegrated rocks, complete all as specified and directed.

Excavation in trenches exc. 1.5 & not exc. 3mtr in depth for foundation and getting out in hard/dense soil, complete all as specified and directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed.

Removing excavated materials (Soil) exc. 50m but n. exc. 250.00 m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2, using 40mm graded stone aggregate as in drain pipes including forming cradles, suitable for 150mm bore of pipe, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2, using 40mm graded stone aggregate as in drain pipes including forming cradles, suitable for 200mm bore of pipe, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2, using 40mm graded stone aggregate as in drain pipes including forming cradles, suitable for 250mm bore of pipe, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2, using 40mm graded stone aggregate as in drain pipes including forming cradles, suitable for 300mm bore of pipe, complete all as specified and directed.

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with rubber ring joints, including taking down of old unserviceable existing pipe, complete all as specified and directed.

M&L for 200mm bore reinforced concrete pipes, class NP2, laid and jointed complete with rubber ring joints, including taking down of old unserviceable existing pipe, complete all as specified and directed.

M&L for 250mm bore reinforced concrete pipes, class NP2, laid and jointed complete with rubber ring joints, including taking down of old unserviceable existing pipe, complete all as specified and directed.

M&L for 300mm bore reinforced concrete pipes, class NP2, laid and jointed complete with rubber ring joints, including taking down of old unserviceable existing pipe, complete all as specified and directed. Note for item nos. 15 to 18 :- Laying of sewage line work is to carried out in running sewage water therefore, temporary diversion /plugged of existing sewage line & bailing out of sewage water is the responsibility of contractor and the cost for the same provisions shall be deemed to be included in unit quoted rates.

Cleaning of manholes of any size and of any depth by taking out semi solid / solid sludge complete and removing sludge in covered vehicle out of MOD land complete all as directed by Engr-in-charge.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for the following dia of pipe, complete all as specified and directed:- (a) 150mm bore

(b) 200 mm Bore

(c) 250 mm bore

(d) 300 mm bore

S&F in repairs 75mm dia, cast iron nahani trap with stainlss steel grating including jointing to waste pipe, fixed to cement concrete type B1 1:2:4, complete all as specified and directed.

Dismantling stone slab/tiles of any description or thickness, laid, bedded & pointed in cement mortor in floors, hard standing, apron etc, complete all as specified and directed

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base / flooring, well compacted, finish surfaces even, complete all as specified and as directed.

M&L for precast coloured, chequered cement concrete tiles, glossy finish of size 305 x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6). complete all as specified and directed

M&L for precast cement concrete interlocking paver blocks, coloured, glossy finish with any shape and size conforming to IS-15658-2006, 60mm thick, M-35 grade, laid over & including 50mm thick stone dust/grit, complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, 25mm average thickness leveling course as in padding concrete complete all as specified and directed.

M&L for matt finished coloured ceramic tiles 400x400x 7 to 8mm thick size, joint free of approved colour, set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 20mm thick screed bed in CM 1:4 etc as in flooring complete all as specified and directed.

M & L for 300x600mmx5.5 to 6mm thick coloured glazed ceramic tiles in dado/skirting , laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10 mm thick backing coat in CM (1:3) including triangular filleting on top in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

S&F in repairs GI tubing 15mm dia medium grade including with all fittings & fixtures, fixed to walls & ceiling or laid in floors including taking down of old unserviceable pipe, complete all as specified and as directed

S&F in repairs GI tubing 20mm dia medium grade including with all fittings & fixtures, fixed to walls & ceiling or laid in floors including taking down of old unserviceable pipe, complete all as specified and as directed

S&F in repairs GI tubing 25mm dia medium grade including with all fittings & fixtures, fixed to walls & ceiling or laid in floors including taking down of old unserviceable pipe, complete all as specified and as directed

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm and n exc 20cm girth, complete all as specified and directed

S&F Hand Shower( Health faucet) with 8mm dia, 1.2mtr flexible tube and wall hook with N.R.V. (back flow prevented) complete all as specified & directed.

S&F in repairs PVC waste pipe 32/40mm dia 610mm long suitable for WHB or Sinks etc complete all as specified and directed.

S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed

S&F in repair Grating doom with waste hole 125 mm dia of PTMT (Minimum weight 40gms) complete all as specified and directed

S & F in repairs vitreous china wash hand basin, white flat back of size 550x400mm including PVC waste coupling 32mm, CP fancy type angle cock, 15mm bore and PVC waste pipe, PVC connection 45cm long including CI brackets / fixing with fasteners etc, complete all as specified and directed by Engr-in-Charge.

S&F in repair basin Mixer suitable for hot and cold water without popup waste with 450mm long Braided Hoses complete all as specified and directed. (Make : Jaquar Product code ARI-CHR-39001B or equivalent model in Kohler as approved.

S & F in repairs, vitreous china wash down water closet pan "Pedestal" coloured including fixing bolts etc with and including PVC seat cover white / coloured with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc complete all as specified and direcrted.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding with and including PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections and 32mm thick PVC Flush pipe suitable for low level cistern etc. complete all as specified and directed.

M&L for granite 18-20mm thick (of any type), work (table rubbed and polished) as in steps, pillar, wall window cill, shelf, cooking platform and like laid over and including 10mm thick rendering in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) as in wall lining (veneering to wall) with and including 12mm thick backing coat in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including triangular filleting on top edge in CM 1:3, complete all as specified and as directed.

Rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

M&L for machine cut cuddappa stone slab one side polished 20 to 25 mm thick as in shelf set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 20mm screed bed in cement mortar (1:6) complete all as specifed and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

S&F in repairs Bib taps CP, 15mm bore, fancy type conforming to CAT No ARI-CHR-39037 of "Jaquar" or Equivalent make as mentioned here-in-after, complete all as specified and directed

S&F in repairs corner glass shelves with CP bracket conforming to CAT No ACN-CHR-1173 of "Jaquar" or Equivalent make as mentioned here-in-after, complete all as specified and directed

S&F in repairs soap dish, CP conforming to CAT No ACN-CHR-1131N of "Jaquar" or Equivalent make as mentioned here-in-after, complete all as specified and directed

M&L PCC (1:4:8) type D-2 as in foundations, filling in mass concrete etc. complete all as specified and directed

M&L for PCC 1:2:4 type B-1, (using 20mm graded stone aggregate) as in surface channels and drains, coping, bed blocks and benching of manholes incl all moulds and forms all as specified and directed.

Extra for forming fair finished drain or channels 30 cm inner girth in cement, concrete using extra cement including forms, moulds, mitred/stopped ends in manholes (inner girth only measured) complete all as specified and directed

Extra for forming fair finished drain or channels 55 cm inner girth in cement, concrete using extra cement including forms, moulds, mitred/stopped ends in manholes (inner girth only measured) complete all as specified and directed

Extra for forming fair finished drain or channels 80 cm inner girth in cement, concrete using extra cement including forms, moulds, mitred/stopped ends in manholes (inner girth only measured) complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping including weathering and throating including necessary form work etc., complete all as specified and directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) of 75mm thick, laid in alternate bays as in path and plinth protection including finishing the surfaces even and smooth using extra cement, complete all as specified and directed

M&L for providing precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate for Manholes covers set in CM 1:4 including demolition of existing unserviceable reinforced cement concrete manhole cover of any description, complete all as specified and directed

S&F MS TMT bars upto 10mm dia cut to length, bent to shape required including cranking, bending , binding, hooking ends abd binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. complete all as specified and directed

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:3:6), type C-2, using 20mm grade stone aggregate and setting in CM 1:6 including demolition of old unserviceable brick / PCC block / stone masonry, built in any cement mortar, complete all as specified and as directed

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete or stone wall surfaces mixed with WPC @ 3 % by weight of cement including taking down existing plaster and including preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and as directed by Engr-in-Charge. Note :- WPC shall be measured and paid separately.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces mixed with WPC @ 3 % by weight of cement, complete all as specified and as directed by Engr-in-Charge. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing compound, complete all as specified and as directed

Dismantling of drain pipes AC /PVC/CPVC pipes of various dia jointed in CM or adhesive 75 to 150mm dia complete all as specified and as directed.

S&F 150 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

Fixing only 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

Fixing only 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floors / in earth, complete all as specified and directed.

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc complete all as specified and directed

S&F high density 50mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbo & bend etc complete fixed to wall or in floors etc complete all as specified and directed

S&F PVC (SWR) bends plain 110 mm bore, complete all as specified and directed.

S&F PVC(SWR) bends plain 75mm bore, complete all as specified and directed.

S&F PVC (SWR) bends with oval access door of 110 mm bore, complete all as specified and directed.

S&F PVC (SWR) bends with oval access door of 75 mm bore, complete all as specified and directed.

S&F PVC SWR Branch piece single (Single Y) equal or unequal 110mm dia with door access, complete all as specified and directed.

S&F PVC SWR Branch piece single (Single Y) equal or unequal 75 mm dia with door access, complete all as specified and directed.

S&F for 110 mm dia PVC SWR vent cowl, complete all as specified and directed.

S&F for 75 mm dia PVC SWR vent cowl, complete all as specified and directed.

S&F in repair CI Hubless pipe of dia 150 mm fixed to walls with necessary fittings and clamps, complete all as specified and as directed.

S&F in repairs CI hubless dia reducer tee (single branch plain Tee) 150x150x100mm complete all as specified and as directed.

S&F in repairs only SS shielded coupling 150mm bore complete all as specified and as directed.

S&F in repairs CI hubless bend 150 mm bore complete all as specified and as directed.

S&F in repair CI Hubless pipe of dia 100 mm bore fixed to walls with necessary fittings and clamps complete all as specified and as directed.

S&F in repairs hubless dia reducer tee (single branch plain T) 100x10x100mm complete all as specified and as directed.

S&F in repairs SS shielded coupling 100mm bore complete all as specified and as directed.

S&F in repairs CI hubless bend 100 mm bore complete all as specified and as directed.

S&F in repairs CI hubless 150x100 mm bore Dimminshing pieces (Reducer) complete all as specified and as directed.

M&L for precast factory made manhole cover with frame of medium duty, of size Square/rectangular/circular area of each cover exc. 0.35 Sqm and n.exc. 0.90 Sqm, 75mm thick with SFRC concreting including groove and hook arrangement for lifting and placing in position and sides covered by MS sheet with necessary collars, complete all as specified and directed.

M & L for preparation of old painted surface and apply one coat of floor paint with ready mixed paint suitable for use on floor complete all as specified & directed by Engineer-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in cement concrete and making good disturbed ground complete all as specified and directed

Supply only chain link MS galvanised fencing any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire including dismantling of old unserviceable fencing wiremesh, complete all as specified and directed.

Supply & Fixing MS work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Supply & Fixing MS framed work as in doors or gates or drain covers of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W (Gde- E- 250) quality-A including dismantling of wrought or MS work of any description, complete all as specified and as directed.

Supply & fixing rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of etc. confirming to Fe-410-W (Gde-E-250) Quality-A including dismantling of old unserviceable wooden rafter purlin work of any description, complete all as specified and as directed.

M&L for cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles including dismantling of old unserviceable MS work of any description, complete all as specified and directed.

S&F in repairs, pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, 150 GSM of any approved colour, having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, including dismentling of old unserviceable CGI sheet of any type complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

Removing of caked mud/ black soil/ STP waste materials out of MD land to a place earmarked by civil authorities including loading, unloading and stacking at the destination, complete all as specified and as directed by Engr-in-charge. Note:- The contractor shall be responsible to liase with civil authorities for permission of disposal and shall maintain necessary safety precaution during loading and unloading at his own cost. Please note nothing extra amount will be admissible on this account.

TULSAYA CONSTRUCTION

Gauri Associates

durga consrtruction