Construction of Atal Aadarsh Vidyalaya at Mohal Gaihra Dhanet in Tehsil Bangana District Una HP

Amount

Cutting in earth work in all heights and depths in all kinds of soil, including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiselling and wedging out of rocks (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer-in-Charge at site., according to the HP.PWD. specification 1990.The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Excavation in foundations, trenches etc. in all kinds of earth work including spade work, pick work, jumper work blasting work including where blasting is prohibited and chiselling / wedging out of rock and their intermediate classification of soil including dewatering whereever required upto all leads and lifts and stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. layer when required into plinths, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth to the dumping site through all mode of transportation including head load, animal load or mechanical means alongwith its leveling at dumping site and complete the work by mechanised means and labour ( If any required) further any loss of the public and private property during the course of execution shall be the absolutely responsibility of the contractor which shall have to duly compensated by him in all respect. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Excavation in drains and channels etcetera in all kinds of earth work including spade work, pick work, jumper work, blasting work and chiselling/wedging out of rock etcetera including dressing of sides and bed and disposing of excavated earth upto all leads and lifts and disposed earth to be levelled and neatly dressed as directed by Engineer-in-charge within all leads and lifts including clearing of jungle.Pick Jumper work and than disposing of all surplus unserviceable excavated earth as directed by the Engineer-in-charge including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks ( Where blasting is prohibited) as per drawings and M.O.R.D. technical specification clause 305.1 and as per direction of the Engineer- in- Charge including setting out, construction of shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per direction of Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental . The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point one five millimeter) thick welded with angle iron in frame 30x30x5mm (thirty into thirty into five millimeter), so as to give a fair finish including centring ,shuttering ,strutting and propping etcetera with wooden battens and ballies , height of propping and centring below supporting floor to ceiling up to all heights and removal of the same for insitu-reinforced concrete & plain concrete work upto allfloor level in all heights in Vertical surfaces such as walls of (any thickness) partitions and the like i/c attached pillasters buttresses, plinth and stringcourses and the like. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10(one cement : five sand : ten graded crushed stone aggregate forty milimeter nominal size) in foundation and plinths and curing complete excluding cost of form work as per HPPWD specification, approved Drawings, design and direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials .The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing weep holes in stone masonry, plain/ reinforced concrete abutment, wing walls, return walls, retaining walls with 100mm ( one hundred millimeter) diameters, finolex/ D-Plast pipe having working pressure 4.00 kg per square meter extending through the full width of the structures with a slope of 1 ( one) vertical : 20 ( twenty horizontal) toward drawing face complete as per drawing and technical specifications clause 614,709,1204.3.7 as per direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental . The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Back filling with granular material behind return wall, abutment, wing wall and return walls complete as per drawing and technical specifications clause 1204.3.8 and as per direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Filling in plinth with sand under floor including watering ramming and consolidating and dressing complete up to any height as per direction by the Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeters) thick welded with angle iron in frame 30×30×5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for insitu reinforced cement concrete and plain concrete work upto all floor Level in all heights in foundation footing of cloumns and mass concrete including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five) thick welded with angle iron frame 30x30x5mm ( Thirty into thirty into five millimeter) size so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering below supporting floor to ceiling upto all height and removal of the same for in-situ reinforced concrete and plain concrete work upto all floor Level in all heights in flat surface such as Soffits of suspended floors,roofs,landings and the like floors etcetera up to any thickness including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeters) thick welded with angle iron in frame 30×30×5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for insitu reinforced cement concrete and plain concrete work upto all floor Level in all heightsin columns, pillars, posts and struts, Square, rectangular or polygonal in plan including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point one five millimeter) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimeters) ,so as to give a fair finish including centring ,shuttering ,strutting and propping etcetera with wooden battens and ballies , height of propping and centring below supporting floor to ceiling up to all heights and removal of the same for insitu-reinforced concrete & plain concrete work upto all floor Level in all heights in Stair cases with sloping or stepped soffits excluding landing. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeters) thick welded with angle iron in frame 30×30×5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for insitu reinforced cement concrete and plain concrete work upto all floor Level in all heights beams, beam haunching, cantilevers, girders bressumers and lintles side and soffits of beams not exceeding 1 metre in depth in all height from floor including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeters) thick welded with angle iron in frame 30×30×5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and catering below supporting floor to ceiling upto any height and removal of the same for insitu reinforced cement concrete and plain concrete work upto all floor Level in all heights in edges of slabs and breaks in all floor and walls for all width and depth upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 ( One cement : four sand : eight graded crushed stone aggregate 40mm (forty milimetre) nominal size) excluding cost of form work in foundation and plinth including carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6 (One cement : Three sand : Six graded crushed stone aggregate 40 mm (forty millimeter) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth including carriage of materials in all leads and lifts Foundations and plinth as per direction of Engineer-In -Chare and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying mechanical mixed and vibrated design mix Reinforcement cement concrete M20 ( M- Twenty ) to obtain the minimum crushing strength of 20 N/mm2( Twenty Newton per milimeter square) with minimum cement content of 380.00 kg( three hundred eighty kilogram),per cubic meter and curing completed to give a smooth and even surface including centring and shuttering etcetera but excluding cost of reinforcement. work in mouldings as in cornices windows sills etc not exceeding 15 cm (fifteen centimeter) in girth . including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M20 ( M- Twenty ) to obtain the minimum crushing strength of 20 N/mm2( Twenty Newton per milimeter square) with minimum cement content of 380.00 kg( three hundred eighty kilogram)per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in foundation,footing bases of columns and the like and mass concrete in all depth/heights including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M20 ( M- Twenty ) to obtain the minimum crushing strength of 20 N/mm2( Twenty Newton per milimeter square) with minimum cement content of 380.00 kg( three hundred eighty kilogram) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work up to all floor level. work in Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilever upto all floor level /height basement and HPPWD specifications approved Drawing design as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials..The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M20 ( M- Twenty ) to obtain the minimum crushing strength of 20 N/mm2( Twenty Newton per milimeter square) with minimum cement content of 380.00 kg( three hundred eighty kilogram) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work up to all floor level work in Vertical and horizental thickness not more than 0.10m) individually or forming box louvers and projected bond such as walls. and HPPWD specifications approved Drawing design as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials..The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and laying design mix Reinforcement cement concrete M25 ( M- Twenty five) grade with 43 OPC grade to obtain the minimum crushing strength of 25 N/mm2( Twenty five Newton per millimeter square) with minimum cement content of 425.00 kg( four hundred twenty five kilogram)per cubic meter, mechanically mixed and vibrated and curing complete excluding the cost form work and reinforced concrete work in foundation footings bases of columns and the like and mass concrete in all depth/height and HPPWDspecifications approved Drawing design as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials..The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and laying design mix Reinforcement cement concrete work of grade M25 ( M- Twenty five) with 43Grade OPC to obtain the minimum crushing strength of 25 N/mm2( Twenty five Newton per milimeter square) with minimum cement content of 425.00 kg( four hundred twenty five kilogram) per cubic meter, mechanically mixed and vibrated and curing complete excluding the cost of form work and reinforced concrete work in Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilever upto all floor level /height basement and HPPWD specifications approved Drawing design as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials..The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and laying design mix Reinforcement cement concrete work of grade M25 ( M- Twenty five)with 43 grade opc to obtain the minimum crushing strength of 25 N/mm2( Twenty five Newton per millimeter square) with minimum cement content of 425.00 kg( four hundred twenty five kilogram) per cubic meter, mechanically mixed and vibrated and curing complete excluding the cost of form work and reinforced concrete work in Columns, pillars, posts and struts basement upto all floor level/height and HPPWD specifications approved Drawing design as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials..The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and laying design mix Reinforcement cement concrete work of grade M25 ( M- Twenty five) with 43 grade OPC to obtain the minimum crushing strength of 25 N/mm2( Twenty five Newton per millimeter square) with minimum cement content of 425.00 kg( four hundred twenty five kilogram),per cubic meter mechanically mixed and vibrated and curing complete excluding the cost of form work and reinforced concrete work in Stair case except spiral stair cases excluding landing but including preparing of the surface and finishing of nosing upto floor to level Basement and as perHPPWDspecifications approved Drawing design as per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials..The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government.

Providing and laying mechanically mixed & vibrated reinforcement cment concrete og grade M-25 with 43 grade OPC design mix to obtain the minimum crushing strength of M-25(Mix-twenty five) using graded crushed stone aggregate 20mm nominal size with minimum cement contents 425 kg per cubic meters including curing complete excluding the of from work and reinforcement concrete work upto all floor level in all height including carriage of material with in all leads and lifts techincal specification per the direction by the Engineer in charge including entire carriage of material within all leads lifts and other incidentials..The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government in wall any thickness but not less than 0.10 meter attached pillasters , buttresses and thire corp and bases string course etc. uptp all floor level

Providing Fe 500D tor steel reinforcement make of SAIL,TISCO,RINL,JINDAL,PANTHER of JSPL,SHAYAM STEEL as per structural design for reinforced cement concrete work including bending binding and placing in position complete in all height including cost of binding wire upto floor all level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying damp proof course 38mm (thirty eight millimeter) thick with cement concrete 1:2:4[one cement :twosand :four graded stone aggregate 12.5mm (twelve decimal five millimeter) nominal size] and curing complete including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Applying a coat of hot bitumen [mexphalt 80/100 (Eighty oblique Hundred) or equivalent] using 1.70kg ( One decimal seven zero kilogramme) per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying Random rubble masonry / polygonal rubble masonry (uncoursed / brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 ( one cement: six sand: twelve graded stones aggregate 20 mm (twenty millimeters) nominal size) in cement mortor 1:6 (one cement : six sand). including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Second class brick work using common burnt clay building bricks in wall (rat trap finished with exposed brick wall/ slate unistone cladding) in super structure in cement mortar 1:6 (one cement : six sand) upto all floor heights as per direction by the Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Second class half brick masonry in common burnt clay building bricks in Cement mortar 1:4(One cement four sand) in super structure curing complete including entire carriage of material within all leads and lifts and other incidentials as per HPPWD Specifications clause and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government..

Stone filling dry hand packed under floor/retaining walls including watering, ramming and consolidating with at least one broken stone face and packed in proper upto all heights as per the direction of Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 19mm thick (nineteen millimeter) made of action teasa Green Novapan kiply National Archid ply termite resistant water proof commercial board box including shelves and shutters, the back side of cupboard/cabinet shell be of 8mm (Eight Millimeter) thick ply & all cut portions of shelves shall be finished with 6mm (Six millimeter) hard board edging. The cut potion of shutters from all the side shall be finished with 12mm thick hard wood edging, the shutters from outside shall be finished with 1mm thick laminated sheet of approved shade including piano hinges and magnetic catcher with all accessories complete as per detail architectural drawing upto all floor level including carriage of material within all leads, lifts and other incidentals.The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government..

Providing and lfixing 19mm thick termite resistant water proof commercial board shutters with hard wood edging and PGI sheett lining inside of shutters of approved size contir miror to IS No. . 1659 of Novapan Archid ply Action Tessa Gren Natuional Kitply make including bright finished iron butt hinges etc. Complete as per details architectural drawing for the work.including carriage of material within all leads, lifts and other incidentals.The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government..

Providing and fixing brass curtain rail with rollers stop ends and brackets in pelmets instead of wooden curtain rod 25mm dia and brackets of first class deodar wood (actual length) of rails to be measured.including carriage of material within all leads, lifts and other incidentals.The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government..

Providing and fixing factory made flush door shutters 35mm thick (commercial board both side ) non decorated phenol bounded termite resistance and boiling water, waterproof core of block board construction with full frame of first class hard wood and well match commercial three ply vaneer with vertical grains or cross band and face vaneer on both face of flush door ISI Marked IS No. 2202 of Kitty flush door Kitply industries (Swastik) Jawala Sgmrat laminate Pvt. Ltd.(Sgmart)CNC Commercial Ltd.(Shivalik) SR Jindal Ply wood industries (Prima) Make .including carriage of material within all leads, lifts and other incidentals.The rates are inclusive octroi,royalty,malkana toll tax, sale tax,GST,labour cess and other taxes imposed by the Government..

Providing and fixing anodized aluminium(Zindal) sliding door bolts anodized colour or shade with bolts and nuts screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. 300×16mm(three hundred into sixteen millimeter)

Providing and fixing anodized aluminium (Zindal)tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. i)250×10mm(two hundred fifty into ten millimetre)

Providing and fixing anodized aluminium (Zindal)tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. i)150×10mm(one hundred into ten millimetre)

Providing and fixing aluminum (Zindal)handles anodized transparent or dyed to required colour and shade with necessary screws etcetera including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. . . (a)125mm(one hundred twenty five millimetre)

Providing and fixing aluminum (Zindal)handles anodized transparent or dyed to required colour and shade with necessary screws etcetera including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. . . (a)100mm(one hundred millimetre)

Providing & fixing 100 mm (one hundred millimeter) bright finished brass door stopper with rubber cushion screws etcetera to suit shutter thickness complete, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) M.S. single acting spring hinges bright finished with necessary screws etcetera complete, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm ( one hundred millimetre ) M.S. hooks and eyes including entire carriage of materials within all leads , lifts and other incidentials.The rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 65x35mm special quality chromium plated brass cup board lock with six leavers including necessary screws etc. complete (Indian Make). within all leads , lifts and other incidentials.The rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing MS Plain Grill of require pattern in wooden/ Steel frames of windows etc with M.S. flats square or round bars with round headed bolts , nuts and screws , including carriage of material in all leads and lifts and as per direction of engineer - in - charge.The rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts and nuts and wooden plugs and imbedding in cement concrete block30x10x15 cm. 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregates 20mm nominal size ).within all leads , lifts and other incidentials.The rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing bwp phenol bonded exterior/ interior grade, make of Novapan Kitply Nation Archid Ply Action Tessa Green particle board ceiling of approved quality with butt jointing and nail (Frame work and cover fillets to be measured and paid for separately). 8mm thick upto all floor level .within all leads , lifts and other incidentials.The rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing Glass reinforced concrete (G.R.C) Screens in approved size, pattern, design , thickness and colour or M/S Unistone make or equivalent.The Screens should be made from '53 grade' White Portland Cement manufactured by 'JK Cement' or equivalent. Quartz. Fine Silica Sand, Alkai Resistant Glass Fiber manufactured by 'Saint Gobain' or equivalent. Super Plasticizers manufactured by BASF or equivalent . Polymers manufactured by BASF or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by BAYFERROX (Germany) or equivalent. The material casting should take place in Synthetic Rubber/FRP Mould manufactured by 'Reckli' or equivalent. The fixing of Screens should be 'Dry fixing i.e to be done with Stainless Steel (SS-304) 'L' shaped Clamps, dash fasteners and pins as per design and technical specifications and instructions of Engineer-in-Charge.within all leads , lifts and other incidentials.The rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying automatic Hydraulically compressed and polished IS marked No. IS 1237 Terraggo Tiles 20 mm thick of approved shade with marble chips of specified size laid in floor, treads of steps and landings on a bed of 25 mm average thickness of cement mortor 1:6 ( 1 cement : 6 sand). cement jointed with neat cement slurry mixed with pigment to match the shade of tiles ( where ever required) including rubbing and polishing complete with tiles Silver Grey.shade size 400x400x30mm in the ratio of 705 white and 305 grey cement of OB ,2B chips of Colours 405 Green 10% yellow 105 Maroon within all floor level with in all leads , lifts and other incidentials.The rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying precast Vibro Hydraulically compressed Chequered Terrazzo Tiles with semi round nosing 300x200x25mm with marble chips of specified size of NTC 20 mm thick IS marked No. IS 1237 of approved shade in skirtig , risers of stepsnot exceeding 30cm,in height on 10 mm thick cement plaster 1:3 ( 1 cement : 3 sand) in the ratio of 50 % white & 50 % grey cement jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)including rubbing and polishing complete with tiles of .Silver Grey. shade uptoall floor level within all leads , lifts and other incidentials.The rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying precast Vibro Hydraulically compressed and polished wax Terrazzo Tiles marked IS No. 1237 20mm thick with marble chips of specified in Skirting and riser of steps not exceeding 30cm. In height of 10mm thick of NTC or ist equivment in cement mortar 1:3 ( ine cement three sand )jointed with neat cement slury mixed with pigment to match the shade size 250x250x20mm thick of tiles (wherever required) including rubbing and polishing complete with silver grey shade and curing complete upto all floor levels in all heights including entire carraige of materials with in all leads and lifts and technical specifications and as per the direction by the Engineer -In -Charge and other incidentals.he rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

White glazed tiles 6mm thick in skirting 20x30 cm. dedo riser of steps and dado laid or a bed of 12mm thick cement mortar 1:3 (1 Cement : 3 Sand) & jointed with cement slurry upto all floor Level 20x30cm. Size.within all leads , lifts and other incidentials.The rate are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing & laying 40 mm (forty millimeter) thick Cement concrete flooring with 25mm under layer 1:3:6 (one cement : three sand: six graded stone aggregate 12.5 mm (twelve point five millimeter) nominal size) laid in one layer finished with a floating coat of neat Cement. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 2mm thick heavy duty PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately)comlete upto all floor levels .including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government

Providing and fixing 10mm (ten millimeter) thick full body anti skid water proof stain and impect resistent heavy duty vetrified tiles in matt finish Nitco Kajariaso many orient rank Jonshan & Jonshan 300x300 mm (three hunderd into three hunderdmillimeter) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve millimeter) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.upto all floor levels including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 20mm. thick acid and Alkali proof tiles of Kajaria Nitco Saramony orient RMC Jonshan & Jonshan make of size 300 x 300mm .(three hunderd into three hunderd millimeter) of specified shade in floors, treads of steps and landing laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) in white cementjointing with cement slurry mixed with pigment of required shade complete upto all floor level to match the shade of tiles. as required complete. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying marble work(table rubbed and polished ) in flooring 20mm thick (average thickness)base in cement mortar 1:3(one cement: three sand) laid over and jointing with CM 1:2(one white cement: two marble dust) with an admixture of pigment to match the shade of the marble 20mm thick white makrana marble.including rubbing and polished complete of 20mm thick board a green marble semi round nosing upto all floor level including carriage of material with in all leads and lifts and other incidentalsThe rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. white markana marble. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying antiskid digital viterified tiles of Kagaria Nitco So many orient rank Jonshon and Jonshon full body 450x450x15mm exterior grade shade and colour inflooring, treads of steps and landings laid over 8mm thick cement mortar 1:3 (1 Cement : 3 Sand)in white cement mixed with pigment of required shade of tiles match the shade of tiles complete upto all florr Level .including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Garsa stone 12mm cladding on R.C.C surface side as on faces of arch masonry walls etc on 12mm thick cement plaster 1:3 (1 Cement : 3 Sand) and jointed with cement slurry including scaffolding etc complete upto all floor level .including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing12mm thick green chalk board (non megnatic with superior quality framing specially anodized aluminium profile 20x15mm with corners of black plastic shall be provided . The board surface shall be known porous ceramaic particle on the top green surface for the smooth writing with chalk over 11mm thick particle board which shall have backing material of galavanized sheet 0.28mm approximate the board shall be fixed on the wall with specially designed J clumps and square clumps with the help of nylon sleeves and screws upto all floor level .including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 30cm ( Thirty centimeter) wide 45cm (Forty five centimeter) Overall semi-circular plain G.I. sheet gutters with iron brackets, 40x3 (Forty into three) milimeter size bolts and nuts and washer etc including making necessary connection with rain water pipe complete as per design 0.63mm thick sheet Tata make .including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six millimeter) thickness having 1060 mm (one thousand sisty millimeter) covered with over all width 1126 mm (one thousand one hunderd twenty six millimeter) prepainted steel sheet (TATA Durashine Make) roofing over steel trusses prepanted galvanised steel hot dip metalic zinc coated sheet with the topcoat of regular modified polyster ( R.N.P.) organic coating of 20 ( twenty micron) over 5 ( five ) micron primer plus back coat of polyster of 5 (five) micron over 5 ( five ) microns primer coating including fixing with prepainted Iron J or L Hooks, bolts and nuts 6mm (six millimeter) diametre with prepainted limpet and rubber washer complete with all acessories as required (steel truss will be paid extra) upto all floor level as per direction of the Engineer in Charge, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cms.(Sixty centimeters) Overall with 0.60mm thick perpainted prepanted galvanised steel (TATA Durashine Make) hot dip metalic zinc coated sheet with the topcoat of regular modified polyster organic coating of 20 ( twenty micron) over 5 ( five ) micron runner plus back coat of polyster of micron over 5 ( five ) microns primer coating fixed with J or L hooks 6 mm(six milimeter) dia with limpet and butumen washers complete upto all floor Level as per entire satisfaction of the Engineer-in-charge. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing valley 60cm overall 0.60mm thick prepainted steel sheet Tata Durashine make in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 microns over 5 microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm diameter with prepainted G.I limpet and bitumen washers complete with all accessories as required upto all floor level as per the direction of Engineer-in- Charge. as per direction of the Engineer in Charge, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing flushing 38 cm overall with 0.60mm thick prepainted steel sheet Tata Durashine make in roofing with dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating plus back coat of polyster of 5 microns over 5 microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6 mm diameter with prepainted G.I limpet and bitumen washers compelete with all accessories as required upto all floor Lavel as per the direction of Engineer-in- Charge.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing M.S.B.P sheet Tata make 1.66 mm to 2 mm (One point sixty six milimeter to two milimeter) thick in eaves board/fascia/soffits/ceiling including cutting, fixing and welling to steel roof members and applying a coat of red lead primer compete upto all floor Laevel as per the direction of the Engineer - in - Charge (base member of steel work shall be measured and paid for separately).as per the direction of Engineer-in- Charge.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face PVC (Finolex , Suprme AKG, Prine , Kisan, SFMC, Dplast Make) 110 mm dia (one hundred ten melimeter )rain water pipes of working pressure not less than 4.5 kg / square Centimeter including filling the joints with approved adhesive complete upto all floor level including carriage of materials within all leads and lifts. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing on wall faces PVC (D-Plast) Finolex Suprme AKG, Prine , Kisan, SFMC, Dplast Make accessories for rain water pipes including filling the joints with approved adhesive complete as per HP.PWD. specification upto all floor level. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government .

a) PVC Plain bend 110 mm dia (one hunderd ten millimeter dia).

b)PVC Shoe 110 mm dia (one hunderd ten millimeter dia)

c) PVC Clamps 100 mm dia (one hundred millimeter dia)

Steel work(Tata , JINDAL make) welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In beams joists channels, angles, tee , flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like complete in all respect upto all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Steel work(Tata, JINDAL make) welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in trusses and trussed purlin in building complete in all respect upto all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Steel work(Tata, JINDAL make) welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In gratings framed guard bars, ladders, railings, brackets and similar work, complete in all respect upto all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing MS railing for stair case having balluster of 19mmx19mm Square bar with a clear height of 85 cm embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm size complete with a applying priming coat of red lead paint upto all afaloor Level as per drawing and specification and as per direction of Engineer-in-Charge.including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing railing for ramp having balluster of 25mm dia hollow M.S pipe (ISG-18) GAUGE with a clear height of 75 and 90 as per detail @ of 60 cm C/C jointing in Cement Concrete steps and jointed with electrical/ gas welding at top along with hand rail of hollow M.S. pipe with slip resistance 50mm dia . (ISG-181 M.S flat of 50 x 5 mm complete and applying coating with red lead paint upto all floor level as per specification and direction of Engineer-in- Charge. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing MS railing for stair case having balluster of 19mm x 19mm square bar with a clear height of 30 cm embedded in brick masonry wall with electrical/gas welding at top with hand rail 50mm dia of MS pipe with a applyng primimg coat of red lead paint upto all floor level as per drawing , specification and as per direction of Engineer-in-Charge.ncluding carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing moulded hand rail of MS hollow pipe 50mm dia welded in straight length for MS flat at top of vertical ballusters including one coat of red oxide priming coat complete (M.S. flat and ballusters of railings shall be measured and paid separately upto all floor level.as per drawing , specification and as per direction of Engineer-in-Charge.ncluding carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. channels doors, windows frames made of Sun Harvic, steel man industries PDindustries metal windows,Chandni industries Ganpani Udyog (Rajpura) manifactured from M.S. section ISMC 75 x 40 mm & M.S. flat 75 x 5 mm as per drawing including hinges jambs bead and if required angle threshold M.S. angle 50 x 25 mm welded or regidly fixed by mechanical means with split end tails to each jamb including steel butt hinges 2.5mm( two point five millimeters) and provision of locking arrangement and shock absorber as technical specified and applying a coat of approved steel primer after pre treatment of surface upto all floor level as directed by the Engineer-in-Charge including carriage of material with all leads and lift and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing angle iron cup board frames made of Sun Harvic, steel man industries PDindustries metal windows,Chandni industries Ganpani Udyog (Rajpura) manufactured from M.S. angle iron section 25 x 25 x 5 mm (twenty five into twenty five into five millimeter )thickness including hinges, jamb, lock jamb, beed and if required angle thrashold of mild steel angle 25 x 25 mm(twenty five into twenty five milimeter welded or regidly fixed by mechanical means , lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provison for locking arrangement and shock absorber as specified and applying a coat of approved steel primer aftre pretreatment of the surface upto a;; floor level as directed by the Engineer-in-Charge.including carriage of material with all leads and lift and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing MS channels doors, windows frames made of Sun Harvic, steel man industries PDindustries metal windows,Chandni industries Ganpani Udyog (Rajpura)manufactured from M.S. section ISMC 75 x 40 mm and MS flat 75 x 5 mm in combination welded together and standarad window shutter having style of Z-section with T-Section of 25 x 25 x 3 mm and angle iron 25 x 15 x 3 mm as per drawing complete with fitting with necessary screws including ninges jambs beed and if required angle theese should MS Angle 50x25mm welded or rigidly fixed by machanical means with split end tail to each Jamb including steel but hinges 2.5mm and provision of locking arrarangement and shock onbserver as specified after pretreatment and applying a primimg coat with red lead paint complete as per approved specification/design.as directed by the Engineer-in-Charge.including carriage of material with all leads and lift and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Side Hung

Top Hung

Fixed

Providing and fixing steel wire gauge shutter in Z-Section Sun Harvic, steel man industries PDindustries metal windows,Chandni industries Ganpani Udyog (Rajpura) using galvanised M.S. wire gauge of I.S. gauge designation 85g (eighty guage)with wire of dia 0.56mm (zero point five six milimeter)for doors, windows and clear story windows with metal beading of approved qualty and shape section with necessary screws and applying a coat of primer with red lead paint complete upto all floor level as per approved design.as directed by the Engineer-in-Charge.including carriage of material with all leads and lift and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters made of Sun Harvic, steel man industries PDindustries metal windows,Chandni industries Ganpani Udyog (Rajpura) with vertical channels 20 mm x 10 mm x 2 mm and braced with flat iron diagonals 20 mm x 5 mm (twenty x five milimeter ) size with top and bottom rails of T-iron 40 mm x 40 mm x 6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers, handles including applying a priming coat of red lead paint complete upto all floor Level .as directed by the Engineer-in-Charge.including carriage of material with all leads and lift and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. fan clamp type-1 of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion of loop, all as per satndard design complete upto all floor level.as directed by the Engineer-in-Charge.including carriage of material with all leads and lift and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces make of ICI(DULUX GLOSS),NEROLAC,BERGER( Lux of high gloss), ASIAN PAINTS(Premium Apcolite Gloss) shlimar with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter Enamel paint other than white upto all floor level, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Applying a priming coat over new wood and wood based surface make of ICI,NEROLAC,BERGER ,ASIAN PAINTS, Sahlimar after and including preparing the surface by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting ready-mixed paint brushing wood primer pink upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Applying two coats of wood preservatives of ICI, Nerolac Burger Asion paints , Shalimar on new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil , gease, dult and other foreign matter, sand papering and knotting upto all floor level . including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new wood and wood based surface make of ICI(DULUX GLOSS),NEROLAC,BERGER( Luxol of high gloss), ASIAN PAINTS(Premium Apcolite Gloss) Shalimar with ready mixed paints brushings to give an even shade including cleaning the all dirt, dust and other foreign matter sand papering and stopping with ready mixed paint other than white upto all floor level, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

6mm (six millimeters) thick cement plaster to ceiling with cement mortor 1:3(one cement: three sand), upto floor all level including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

15mm (fifteen millimeter) cement plaster in Cement mortar 1:6 (one cement : Six sand) single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80cm (eighty centimetres) in girth and finished even and smooth . including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

15mm (fifteen millimeter) cement plaster in Cement mortar 1:6 (one cement : Six sand) single coat on fiar side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80cm (eighty centimetres) in girth and finished even and smooth . including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

15mm (fifteen millimeter) cement plaster in Cement mortar 1:3 (one cement : three sand) single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80cm (eighty centimetres) in girth and finished even and smooth . including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Applying one coat of Acrylic primer of Nerolac Burger (Bison Acrylic ) Asian Paint ( Tractor Acrylic ) Shalimar make on new concrete/masonry/Plastered surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete upto all floor level .including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design Asian Paint ICI , Dulex gloss Nerolac Burger (Luxol highi Gloos) premimum Apcolite glos and Shalimar Paint (Apexultima) or its equarlied on undecorated wall surfaces (Two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete upto all floor level .including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete, upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Applying one coat of distamper primer Burger ( Castle) Jenson and Nicholson (J& N) Golden paint Aqualac of approved brand and manufactured on wall surfaces after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth to give final matter finish to the surface complete,upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Distempering ( two coats) with oil bound washable distemper of make of Berger( Castle) Jenson and Nicholson (J& N) Golden paint Aqualac approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including priming coat with distemper primer of approved brand after thoroughly brushing the surface free from mortor dropping and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer Complete upto all floor level including carriage of materials within all leads and lifts. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying expension joints with Dr. fixit pidilite chemical including preparation of joint and backing of backup material in closed cell polothelene foam sheet or rod including bond breaker tape and primimg to joint with Dr.Fixit pig : prime then apply PS 41 G and 42 P with gun or pouring respectively and finished with soap solution complete upto all floor level. including carriage of materials within all leads and lifts. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying cement water proofing treatment with Dr.FIXIT FAST FLEX of equivelent 6-7 Sqm/Kg (Six desh seven square metre oblique kilogramme) with to component polymer modified compentitious comentitious coating consisting of comentitious power and a polymer liquid in two coats for first coat :- clean and salutae surface and then applying a coat of Dr.FIXIT and the same process shall be extended up to 300mm (Three milimeter) vertically the second coat shall be applied in opposite direction after four to six hours of application of firstly coat then sprinkle sand on top surface of applied Dr. FIXIT then apply cement mortar 1:4 (1 Cement : 4 Sand) and admixed with 200 ml(Two Hundered milliter) of pidi proof LW @ 200ml (Two hundered mililitre) per 50kg (Fifty kilogramme) bag complete upto all floor level as per architect drawing including carriage of material with in all leads and lifts and other incidentals. including carriage of materials within all leads and lifts. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm (seventy five millimeter) thick (unconsolidated) bed or dry brick/stone aggregate 40mm (forty millimeter) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing plinth protection 50mm(fifty millimetre) thick with cement concrete 1:3:6(one cement: threesand: sixgraded crushed stone aggregate 20mm(twenty millimetre) nominal size including finishing the top surface concrete smooth, including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Constructing coursed rubble hammer dressed “U” shape open surface drain with side wall 15x22cm (fifteen into twenty two centimeter)with cement mortar 1:6 (one cement :six sand) and inside plastering with cm 1:3 (one cement: three sand) including earth work and laying 10cm(ten centimeter) cement concrete 1:5:10 (one cement :five sand :ten graded crushed stone aggregate nominal size ) and 7.5cm (seven point five centimeter) cement concrete 1: 2:4 (one cement :two sand: four graded crushed stone aggregate 20mm (twenty millimeter) nominal size ) and finished with a floating coat of neat cement complete as per standard design including curing . including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing the wall celling and floor galvanised mild steel tubes (Medium grade), tube fittings and clamps BST , Jindal (Hissar) Tata Steel Tube Limited , Parkash , Surya make including making good the wall ceiling and floor upto floor level 20mm (twenty Milimeter) nominal bore. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying the in trenches galvanised mild steel tubes (Medium grade), BST , Jindal (Hissar) Tata Steel Tube Limited , Parkash , Surya maketube fittings9 earth work in trenches to be measured paid fr separately (Medium grade)25 mm (twenty five Milimeter) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm (twenty millimeter to fourty millimeter) nominal bore by providing and fixing tee including cutting and threading the pipes complete in all floor level /height including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Fixing water metre and stop cock 20mm (twenty millimeter) nominal bore in galvanised mild steel tube including necessary fittings such as mild steel galvanised jam nut, socket etcetera cutting and making long screws complate (water meter and stop cock to be measured and paid for separately). including upto all floor elevel carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous china wash down water closet(European) Type- W.C. Pan) make of Parryware Hindware Sanitary ware Neycer Cera with integral ‘p’ or ’s’ trap including jointing the trap with soil pipe in cement mortar 1:1(one cement: one sand) (sheet and cover to be measured and paid for separately) in all floor Anglo Indian Universal Closet upto all floor level .including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing various china wash down water closet squatting pan make of Parryware Hindware Sanitary ware Neycer Cera (Indian type W.C. pan)size 580mm(Earth work, bed concrete, foot rest and trap to be measured and paid for separately).Orissa Pettern uptp all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing in cement mortar 1:3(one pair cement : three sand), a pair of vitreous China 250mmX130mmX30mm foot rest for long pattern squatting pan water closet.upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT Coloured /White high density Polyethy lence propylene 10 (ten) litres capacity Pravej make (full length) European Standred control low level flushing cistern with fittings with 15mm nominal bore PVC ball valve Plolythene float with a pair of. bracket with fittings . syphon with inlet, outlet and over flow pipes 40mm (forty mmeillimeter dia) C.P. Flush bend including cutting Koles in make and bottam couplings for connections and counecting the flush bend cistern and closet making good the same ( over floe pipe to be measured and paid for separately) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing G.I inlet connection for flush pipe with W.C pan with cistern and closet upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing White plastic seat and cover (Solid type) and cover make of Commander diplomat Hindware Admival ,Cera for wash down water closet with C.P. brass hinges and rubber buffers upto all floor Level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing various china bowl pattern urinal make of Parryware Hind Ware Saintary were Neycer Cear, including connection the urinal make of Parryware, Hindware , Sainitary ware, Neycer, Cera with waste pipe by means of white lead mixed with chopped hemp ( waste pipe to be measured and paid of separately) Flat back type of size 430mmX260mmX350mm(in all floor)including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous China squatting plate pattern urinal make of kingston, Gem,parko, techno, Jal , ESS,ESS, Jaquar, Sieko size 450mmX350mm (four hundred fifty into three hundred fifty millimeter)with integral longitudinal flush pipe make of Commander diplomat Hindware Admival ,Cera .including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing automatic flushing cistern with apair of C.I. or M.S. brackets complete with fittings including C.I. Syphonic apparatus. Mosquito proof lid, C.P. Brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately):-make of Vitreous China Hindware Admival ,Cera 5.00 Liters Capacity.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimeter) C.P. brass nominal bore flush pipe / spraders for urinal with fittings such as unions, clamps etcetera( all C.P brass.) including cutting holes and making good the same.upto all foor floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing feat back630mm x 450mm ( six hundred thirty millimeter into four hunderd fifty millimeter) dia (counter top) viterous China wash basin of make of Hindware,Parryware,Sanitaryware,Neyser,Cera with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting upto al;l floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Hindware Vitreous China padestal for wash basinmake of Hindware,Parryware,Sanitaryware,Neycer,Cera complete recessed at the back for receiption pipe and fittings.complete upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Extra over for a pair of holes for pillar taps instead of single holes complete upto all floor level and as per direction of Engineer-In- Charge .ncluding carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Vitreous China kitchen sink 600x450x250 mm (six hunderd into four hunderd fifty intotwo hundred fifty millimeter) make of Parryware, Hindware , Sanitary ware, Neycer, Cera with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting upto all floor level. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing Vitreous China Laboratory sink 600x450x250 mm (six hunderd into four hunderd fifty intotwo hundred fifty millimeter) make of Parryware, Hindware , Sanitary ware, Neycer, Cerawith C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting.upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass chain 50 cm (fifty centimitre) long make of Kingston,Gem, Parko, Techno,Jal, Ess, Ess,Jaquar, Seiko, and rubber plugs 32 mm (thirty two millimeter) dia for wash basin or sink upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing rubber plugs 32 mm (thirty two millimeter) dia for wash basin or sink upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass waste 32mm (thirty two millimeter) dia (heavy duty make of Jal, ESS ESS, Jaquar, Seiko for wash basin or sink upto all floor lvel including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing & fixing 32 mm (thirty two millimeter) dia M.I. union for wash basin or sink upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing & fixing 32 mm (thirty two millimeter)C.P. brass 'S' trap (heavy duty KINGSTON,GEM,ESS,ESS , Seiko PARKO,JAL,JAQUAR,TECHNO for wash basin or sink upto all floor level including carriage of material within all leads and lifts and other incidental in all floor level / height The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing & fixing 100 mm (one hunderd millimeter) dia sand Coast iron. grating make of KPerfect Hind or ISI Mark S. W.Pipe,for gully floor or Nahni Trap including carriage of material within all leads and lifts and other incidental in all floor level / height. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 600mm x 450mm (six hunderd into four hunderd fifty millimeter) bevelled edge mirror make of Golden Fish, Atul, Modi Guard of superior glass mounted on Palstic sheet and fixed to Palstic plugs with C.P. brass screws and washer upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass towel rail 700x20 mm (seven hunderd into twenty millimeter) (heavy duty ISI marked Kingston,Gem, Parko, Techno,Jal, Ess, Ess,Jaquar, Seiko,complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 600x120 mm ( six hunderd into one hunderd twenty millimeter) glass shelf with C .P brass and guard rail complete, fixed to wooden plugs with C. P brass screw upto all floor l;evel including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder make of Kingston,Gem, Parko, Techno,Jal, Ess Ess,Jaquar, Seiko including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing liquid soap plastic container Glass container. with C.P. brass lid and brackets fixed to wooden plugs with C.P. brass screws complete upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing charomium plated brass soap dish make of Kingston,Gem, Parko, Techno,Jal, Ess Ess,Jaquar, Seiko with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing recessed soap tray with hand rail 300 mm x 150xmm (three hundred in to one hundred fifty) (Viterous China) make of Parryware, Hindware , Sanitary ware, Neycer, Cera including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous china divison plate make of Hindware,Parryware,Sanitaryware,Neyser,Cera for urinal size 600x300 mm (six hunderd into three hunderd millimeter)upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia CP brass bib tap of make of make of KINGSTON,GEM, PARKO,JAL,JAQUAR Techno,Jal,Ess Ess,Jaquar, Seiko complete upto all floor elevel including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia CP brass pillar tap of make with capastan headKINGSTON,GEM, PARKO,JAL,JAQUAR Techno,Jal,Ess Ess,Jaquar, Seiko upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia C.P.brass stop cock make of KINGSTON,GEM, PARKO,JAL,JAQUAR Techno,Jal,Ess Ess,, Seiko upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia C.P.brass angle valve without nut and pipe make of KINGSTON,GEM, PARKO,JAL,JAQUAR Techno,Jal,Ess Ess, Seiko complete upto all florr level including carriage of material within all leads and lifts ,without nuts and pipe and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) mixer ISI marked IS:8931 & 8934 of jaquar for kitchen sink with top / bottom swinging spout complete upto all floor level.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing two hole basin mixing faucet for shower and bath hand shower with Angular and Rest Holder (heavy duty ISI marked IS:8931 & 8934) make of KINGSTON,GEM, PARKO,JAL,Techno,Jal,Ess Ess,Jaquar, Seiko with brass union complete upto all floor level including carriage of materials within all leads and lifts. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing PVC connection pipe (heavy duty make of Finolex with brass union 15mm (fifteen millimeter) nominal bore 45cm (forty five centi metre) length, upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia brass full way valve with wheel maked of Zoloto, Leaded,Sant L & K upto all floor level including carriage of material within all leads and lifts and other incidental in all floor level/height. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimeter) dia brass full way valve make of Zoloto, Leaded,Sant L& K with wheel upto all floor level including carriage of material within all leads and lifts and other incidental in all floor level/height. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia brass full way valve make (horizontal of Zoloto, Leaded,Sant plumger typa L& K with wheel nominal bore high pressure with polythene plastic float complete upto all floor level including carriage of material within all leads and lifts and other incidental in all floor level/height. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimeter) dia G.I. Or M.I.union make of Unik,Amco,KS,AVR,NVR,RR,SUW (where not includedin the item), upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (twenty millimeter) dia G.I. Or M.I. union make of Unik,Amco,KS,AVR,NVR,RR,SUW ( where not includedin the item), upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing polyethylene – Aluminum polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized kitech make with carbon black confirming to IS- 15450-2004 water supply including clamps at one meter spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipe exposed on wall internal work exposed on wall 1216 (16mm O.D. pipe ) upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing polyethylene – Aluminum polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized Kitech make with carbon black confirming to IS- 15450-2004 water supply including clamps at one meter spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipe exposed on wall internal work exposed on wall 1620 (20mm O.D. pipe) upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing composite end seal compression fitting Kitch make as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing , testing and fitting complete upto all floor level including cutting and making good the walls etc. including carriage of materials within all leads, lifts and other incidentals.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Equal Tees 1216mm. (one thousand two hunderd sixteen millimeter) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Equal Tees 1620mm. (one thousand six hunderd twenty millimeter) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Reducing tee 1620 into all branches (one thousand six hunderd twenty ). including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female branch tee 1216 x 1216x15mm (one thousand two hunderd sixteen into one thousand two hunderd sixteen into fifteen millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female branch tee 1620 x 1620 x 20 mm thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female elbow 1216 x 15 mm (one thousand two hunderd sixteen into fifteen millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female elbow 1620 x 15 mm (one thousand six hunderd twenty into fifteen millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female elbow 1620 x 20 mm (one thousandsix hunderd twenty into twenty millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Male thread connector 1216 x 15 mm (one thousand two hunderd sixteen into fifteen millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Male thread connector 1620 x 15 mm (one thousand six hunderd twenty into fifteen millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Male thread connector 1620 x 20 mm (one thousand six hunderd twenty into twenty millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female thread connector 1216 x 15 mm (one thousand two hunderd sixteen into fifteen millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female thread connector 1620 x 15 mm (one thousand six hunderd twenty into fifteen millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female thread connector 1620 x 20 mm (one thousand six hunderd twenty into twenty millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Couplers 1216 mm. (one thousand two hunderd sixteen millimeter) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Couplers 1620 mm. (one thousand six hunderd twenty millimeter) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Reducers 1620 x 1216mm. (one thousand six hunderd twenty into one thousand two hunderd sixteen millimeter) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing PE-AL-PE- composite internal seal compression kitch make fitting as per IS-15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing , testing and fitting complete including cutting and making good the walls etc. upto all floor level including carriage of materials within all leads, lifts and other incidentals. including carriage of materials within all leads, lifts and other incidentals.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Equal Tees 1216mm. (one thousand two hunderd sixteen millimeter) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Equal Tees 1620mm. (one thousand six hunderd twenty millimeter) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Reducing tee 1620 into all branches (one thousand six hunderd twenty into all branches). including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female branch tee 1216 x 1216x15mm (one thousand two hunderd sixteen into one thousand two hunderd sixteen into fifteen millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female branch tee 1620 x 1620 x 20 mm thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female elbow 1216 x 15 mm (one thousand two hunderd sixteen into fifteen millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female elbow 1620 x 15 mm (one thousand six hunderd twenty into fifteen millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female elbow 1620 x 20 mm (one thousandsix hunderd twenty intotwenty millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Male thread connector 1216 x 15 mm (one thousand two hunderd sixteen into fifteen millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Male thread connector 1620 x 15 mm (one thousand six hunderd twenty into fifteen millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Male thread connector 1620 x 20 mm (one thousand six hunderd twenty into twenty millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female thread connector 1216 x 15 mm (one thousand two hunderd sixteen into fifteen millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female thread connector 1620 x 15 mm (one thousand six hunderd twenty into fifteen millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Female thread connector 1620 x 20 mm (one thousand six hunderd twenty into twenty millimeter) thread. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Couplers 1216 mm. (one thousand two hunderd sixteen millimeter) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Couplers 1620 mm. (one thousand six hunderd twenty millimeter) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Reducers 1620 x 1216mm. (one thousand six hunderd twenty into one thousand two hunderd sixteen millimeter) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing P V C water storage tank 1000 L (one thousand litres) net capacity tank of make SINTEX IS: 12701 three layers technology marked G.I inlet and outlet connection 15 mm (fifteen millimeter) nominal bore ball valve and mosquito proof P V C cover with locking arrangements including hosting up to all heights above ground level complete upto all floor level. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110 mm x 90 mm (one hunderd ten into ninty millimeter) PVC floor traps ISI marked make of FINOLEX of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetera complete upto all floor level, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 110mm (one hunderd ten millimeter) dia high pressure PVC Finolex make spigot and socket waste and ventilating pipe ISI marked i/c fixing with approved adhesive etcetera complets upto all floor level. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 75mm (seventy five millimeter) dia high pressure PVC Finolex make spigot and socket waste and ventilating pipe ISI marked i/c fixing with approved adhesive etcetera complets upto all floor level. including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110 mm (one hunderd ten millimeter) PVC single equal branch with oval access door, ISI marked make of FINOLEX insertion rubber washer 3 mm (three millimeter) thick bolts and nuts complete including fixing with approved adhesive etcetera complete upto all floor level, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75 mm (seventy five millimeter) PVC single equal branch with oval access door, ISI marked make of FINOLEX insertion rubber washer 3 mm (three millimeter) thick bolts and nuts complete including fixing with approved adhesive etcetera complete upto all floor level, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (one hunderd ten millimeter) PVC door bend with oval acces door, insertion rubber washer 3 mm (three millimeter) thick bolts and nuts ISI marked make of FINOLEX complete upto all floor levelincluding fixing with approved adhesive etcetera complete, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) PVC door bend with oval acces door, insertion rubber washer 3 mm (three millimeter) thick bolts and nuts ISI marked make of FINOLEX complete upto all floor level including fixing with approved adhesive etcetera complete, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110 mm (one hunderd ten millimeter) (PVC)single equal branch plain ISI marked Finolex make including fixing with approved adhesive etc. complete upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75 mm (seventy five millimeter) (PVC)single equal branch plain ISI marked Finolex make including fixing with approved adhesive etc. complete upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110 mm (one hunderd ten millimeter) PVC collars in all floor level ISI marked make of FINOLEX make including fixing with approved adhesive etcetera complete, upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75 mm (seventy five millimeter) PVC collars in all floor level ISI marked make of FINOLEX make including fixing with approved adhesive etcetera complete upto all floor level, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (one hunderd ten millimeter) dia PVC clamps ISI marked make of FINOLEX a of approved design with steel screws and rawal plugs etcetera complete upto all floor level , including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) dia PVC clamps ISI marked make of FINOLEX of approved design with steel screws and rawal plugs etcetera complete upto all floor level , including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110 mm (one hunderd ten millimeter) dia. PVC cowl ISI Marked make of FINOLEX of approved design complete upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110 mm (one hunderd ten millimeter) dia PVC offset 45 (forty five) degree ISI marked make of FINOLEX including fixing with approved adhesive etcetera completeupto all floor level, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75 mm (seventy five millimeter) dia PVC offset 45 (forty five) degree ISI marked make of FINOLEX including fixing with approved adhesive etcetera complete upto all floor level , including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110mm (one hunderd ten millimeter) dia PVC double equal branch with oval acces door, insertion rubber washer 3 mm (three millimeter) thick bolts and nuts ISI marked make of Finolex complete including fixing with approved adhesive etcetera complete upto all floor level, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 75mm (seventy five millimeter) dia PVC double equal branch with oval acces door, insertion rubber washer 3 mm (three millimeter) thick bolts and nuts ISI marked of Finolex Make complete including fixing with approved adhesive etcetera complete upto all floor level , including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and Fixing 32 mm dia (thirty two millimeter) nominal bore PTMT waste coupling make of Prayog, Viking approved quality and colour upto all floor level including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and Fixing Grab Bar Stainless Steel of Jaguar WAC-WHT-BR 0600,692 mm ( Six hundred ninety two millimeter long including carriage of material within all leads and lifts and other incidental.and as per technical specification as per the direction of Engineer- In-Charge The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes

Providing and laying, to level or slopes 150 mm (one hunderd fifty millimeter)and jointing with Stiff mixture of cement mortar in the pro portion of 1:1 ( One cement : one sand )'Salt Glazed stone ware pipe including testing of pipes and joints complete carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 110 mm (one hunderd ten millimeter) dia PVC 'P' or 'S' trap for water closet ( squatting pan) ISI marked make of FINOLEX including jointing the trap with the pan and PVC pipe with approved adhesive etcetera complete upto all floor level, including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10(one cement: 5 sand : 10 graded stone aggregate 40mm nominal size) bedding for stoneware pipes of t150mm ( One hundred fifty millmeter ) internal diameters, necessary from work and curing complete.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing stoneware gully trap grade ’A’ complete with C.I. grating, brick masonry chamber in cement mortar 1:5 (one cement: five sand) and water tight C.I. cover with frameof 300x300 mm ( Three hundred into three hundred millimeter size) (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg.(two point seventy two kilogram) square mouth trap150X100mm (one hundred fifty X one hundred millimeter) size P or R type as per the direction of Engineer-in –charge including carriage of materials within all leads, lifts and other incidentals.including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Supplying and fixing cast iron cover without frame for manholes For frame of internal dimension 500mm (five hunderd millimeter) C.I cover (medium duty) the weight of cover to be not less then 58Kg. (fifty eight kilogram) complete including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Constructing manhole with R.C.C. top slab in 1:2:4 mix (one cement : two sand : four graded stone aggregate 20mm (twenty millimeter) nominal size), foundation concrete 1:4:8 ( one cement : four sand : eight graded stone aggregate 40 mm (forty millimeter) nomonal size), inside plastering 15mm (fifteen millimeter) thick with cement mortar 1:3 (one cement : three sand) and finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix (one cement : two sand : four graded stone aggregate 20mm (twenty millimeter) nominal size) finished smooth complete including curing and testing Inside size1200x900mm (one thousand two hundred hunderd into nine hunderd millimeter) and 1000mm (one thousand millimeter) deep including C.I. cover and frame (medium duty)500 mm (fiver hunderd millimeter) internal diamensions total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilo gram) (weight of cover 58 kg. (fifty eight kilo gram) and weight of frame 58 kg. (fifty eight kilo gram) with 200mm (two hunderd millimeter) thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (one cement : three sand) including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT jet spray with 1m (one metre) tube of Prayag MAKE of approved quality and colour including carriage of material within all leads and lifts and other incidental. The rates are inclusive of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

unipro