REPAIR/MAINT OF PUMP SET, CHLORONOME PLANTS, STARTERS AND CONNECTED ITEMS IN WATER SUPPLY UNDER GE (AF) TECH AREA, AT AF STN AGRA

Amount

Dismantling/opening of unserviceable AC electric motor of 3 phases 415 Volts of any make of capacity 60 to 75HP of centrifugal/ boosting type pump from site and transporting the same to workshop & back after rewinding of motor with and including super enamelled copper winding wire of superior quality of existing size/ gauge & No of turns and insulation of the same with & including insulating material such as leatherised fibre glass insulation as per manufacturers instructions including cutting and taking out existing burnt/ short circuited winding wires complete and re-assembling of the same after repair, commissioning and testing on completion complete all as specified and directed.

Taking out centrifugal pump set connected with 60 to 75 HP motor from existing foundation after disconnecting all electrical connections and dismantling/ opening of unserviceable centrifugal pump set for making it serviceable by repair/ replacement of the following items and re-assembling/ re-fitting & re-installation of the same in existing position after complete repair including making all electrical connections, commissioning and testing on completion complete all as specified and directed:-

S&F in repairs ball bearing suitable for 60/75 HP centrifugal pump set complete all as specified and directed. Make:- SKF/ NBC/ Tata as approved.

S&F in repairs SS pump shaft 50mm dia with neckring as per existing suitable for 60/75 HP centrifugal pump set complete all as specified and directed.

S&F in repairs rubber coupling with all fixing accessories as per existing suitable for 60/75 HP centrifugal pump set complete all as specified and directed.

S&F in repairs MS coupling with all fixing accessories as per existing suitable for 60/75 HP centrifugal pump set complete all as specified and directed.

S&F in repairs gland plate with nuts, bolts and washers as per existing suitable for 60/75 HP centrifugal pump set complete all as specified and directed.

S&F in repairs cast iron impeller as per existing suitable for 60/75 HP centrifugal pump set complete all as specified and directed.

S&F in repairs stainless steel sleeves as per existing suitable for 60/75 HP centrifugal pump set complete all as specified and directed.

Dismantling/opening of unserviceable AC electric motor of 3 phases 415 Volts of any make of capacity 40HP of centrifugal/ boosting type pump from site and transporting the same to workshop & back after rewinding of motor with and including super enamelled copper winding wire of superior quality of existing size/ gauge & No of turns and insulation of the same with & including insulating material such as leatherised fibre glass insulation as per manufacturers instructions including cutting and taking out existing burnt/ short circuited winding wires complete and re-assembling of the same after repair, commissioning and testing on completion complete all as specified and directed.

Taking out centrifugal pump set connected with 40 HP motor from existing foundation after disconnecting all electrical connections and dismantling/ opening of unserviceable centrifugal pump set for making it serviceable by repair/ replacement of the following items and re-assembling/ re-fitting & re-installation of the same in existing position after complete repair including making all electrical connections, commissioning and testing on completion complete all as specified and directed :-

S&F in repairs ball bearing suitable for 40 HP centrifugal pump set complete all as specified and directed. Make:- SKF/ NBC/ Tata as approved.

S&F in repairs pump shaft 50mm dia with neckring as per existing suitable for 40 HP centrifugal pump set complete all as specified and directed.

S&F in repairs gland plate with nuts, bolts and washers as per existing suitable for 40 HP centrifugal pump set complete all as specified and directed.

S&F in repairs GM bush 50mm dia as per existing suitable for 40 HP centrifugal pump set complete all as specified and directed.

S&F in repairs gun metal impeller as per existing suitable for 40 HP centrifugal pump set complete all as specified and directed.

S&F in repairs rubber coupling with all fixing accessories as per existing suitable for 40 HP centrifugal pump set complete all as specified and directed.

S&F in repairs MS coupling with all fixing accessories as per existing suitable for 40 HP centrifugal pump set complete all as specified and directed.

Taking out submersible pump set including motor of capacity 1.5-2.0HP with column pipe from bore well after disconnecting all electrical connections and lowering the same after necessary repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe & pipe joints including making all electrical connections and testing on completion complete all specified and directed. Note:- Repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe shall be measured and paid separaterly under respective items of Sch 'A'.

Taking out submersible pump set including motor of capacity 5.0-7.5HP with column pipe from bore well after disconnecting all electrical connections and lowering the same after necessary repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe & pipe joints including making all electrical connections and testing on completion complete all specified and directed. Note:- Repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe shall be measured and paid eparaterly under respective items of Sch 'A'.

Taking out submersible pump set including motor of capacity 10.0-12.5HP with column pipe from bore well after disconnecting all electrical connections and lowering the same after necessary repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe & pipe joints including making all electrical connections and testing on completion complete all specified and directed. Note:- Repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe shall be measured and paid separaterly under respective items of Sch 'A'.

Taking out submersible pump set including motor of capacity 15.0HP with column pipe from bore well after disconnecting all electrical connections and lowering the same after necessary repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe & pipe joints including making all electrical connections and testing on completion complete all specified and directed. Note:- Repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe shall be measured and paid separaterly under respective items of Sch 'A'.

Taking out submersible pump set including motor of capacity 30.0HP with column pipe from bore well after disconnecting all electrical connections and lowering the same after necessary repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe & pipe joints including making all electrical connections and testing on completion complete all specified and directed. Note:- Repair/ replacement of wornout/ damaged parts of pumps/ motors/ column pipe shall be measured and paid separaterly under respective items of Sch 'A'.

Supply & lowering in bore well in repairs 32mm bore high density polyethlene (HDPE) column pipe of pressure rating 6Kg/cm2 with & including all necessaru fixing/ jointing accessories complete all as specified and directed. Make- Ashirvad/Kishan/Atul

S&F in repairs 80mm bore MS column pipe heavy grade with heavy duty MS flange welded at both end, 3.0M long with and including making flange joint with 3mm thick rubber sheet including painting with anticorosive paint & necessary nuts & bolts etc of suitable size complete all as specified and directed.

S&F in repairs 100mm bore MS column pipe heavy grade with heavy duty MS flange welded at both end, 3.0M long with and including making flange joint with 3mm thick rubber sheet including painting with anticorosive paint & necessary nuts & bolts etc of suitable size complete all as specified and directed.

Dismantling/opening of unserviceable submersible pump set of capacity 1.5-2.0HP of any make for complete servicing with materials including cleaning, grinding, polishing & reassembling the same and testing on completion complete with replacement of the following items/parts all as specified and directed:-

M&L for rewinding of motor with PVC insulated water proof copper winding wire best quality of existing gauge & No of turns and sealing the winding by using sealing compound including cutting and taking out existing burnt winding complete all as specified and directed..

Replacement of all defective parts of pump set of existing size & make complete all as specified and directed.. Note:- All defective parts shall be measured and paid separately under respective item of Sch ‘A’ as supply only.

Dismantling/opening of unserviceable submersible pump set of capacity 5.0-7.5HP of any make for complete servicing with materials including cleaning, grinding, polishing & reassembling the same and testing on completion complete with replacement of the following items/parts all as specified and directed.:-

M&L for rewinding of motor with PVC insulated water proof copper winding wire best quality of existing gauge & No of turns and sealing the winding by using sealing compound including cutting and taking out existing burnt winding complete all as specified and directed..

Replacement of all defective parts of pump set of existing size & make complete all as specified and directed.. Note:- All defective parts shall be measured and paid separately under respective item of Sch ‘A’ as supply only.

Dismantling/opening of unserviceable submersible pump set of capacity 10.0-12.5HP of any make for complete servicing with materials including cleaning, grinding, polishing & reassembling the same and testing on completion complete with replacement of the following items/parts all as specified and directed.:-

M&L for rewinding of motor with PVC insulated water proof copper winding wire best quality of existing gauge & No of turns and sealing the winding by using sealing compound including cutting and taking out existing burnt winding complete all as specified and directed..

Replacement of all defective parts of pump set of existing size & make complete all as specified and directed. Note:- All defective parts shall be measured and paid separately under respective item of Sch ‘A’ as supply only.

Dismantling/opening of unserviceable submersible pump set of capacity 15HP of any make for complete servicing with materials including cleaning, grinding, polishing & reassembling the same and testing on completion complete with replacement of the following items/parts all as specified and directed:-

M&L for rewinding of motor with PVC insulated water proof copper winding wire best quality of existing gauge & No of turns and sealing the winding by using sealing compound including cutting and taking out existing burnt winding complete all as specified and directed..

Replacement of all defective parts of pump set of existing size & make complete all as specified and directed. Note:- All defective parts shall be measured and paid separately under respective item of Sch ‘A’ as supply only.

Dismantling/opening of unserviceable submersible pump set of capacity 30HP of any make for complete servicing with materials including cleaning, grinding, polishing & reassembling the same and testing on completion complete with replacement of the following items/parts all as specified and directed:-

M&L for rewinding of motor with PVC insulated water proof copper winding wire best quality of existing gauge & No of turns and sealing the winding by using sealing compound including cutting and taking out existing burnt winding complete all as specified and directed.

Replacement of all defective parts of pump set of existing size & make complete all as specified and directed. Note:- All defective parts shall be measured and paid separately under respective item of Sch ‘A’ as supply only.

Flushing/cleaning of existing tube wells in position at various locations by air compressor unit of capacity not less than 300 PSI with minimum pressure of 7 kg/cm2 for sand free water including all necessary materials, labour, tool & plants etc as required and testing of yield complete all as specidied and directed.

Taking out submersible pump sets of any capacity from existing bore wells with column pipe after disconnecting all electrical connections and refitting & lowering the same after development including making all electrical connections and testing on completion complete all as specified and directed.

Supply only the following parts/ items of submersible pumps and bowl assembly for replacement of parts/ items under item Nos. 13 to 17 above complete all as specified and directed:-

GM impeller as per existing suitable for 10.0-12.5HP submersible pump sets complete all as specified and directed.

Intermediate bowl as per existing suitable for 10.0-12.5HP submersible pump sets complete all as specified and directed.

Rotor assmbly complete with rotor shaft suitable for 10.0 - 12.5 HP submersible pump set complete all as specified and directed.

Bowl bush (gun metal) as per existing suitable for 10.0-12.5HP submersible pump sets complete all as specified and directed.

GM impeller seal ring (neck ring) as per existing suitable for 10.0-12.5HP submersible pump sets complete all as specified and directed.

Stainless steel running sleeves (off sizes) as per existing suitable for 10.0-12.5HP submersible pump sets complete all as specified and directed.

Impeller locking keys stainless steel (off sizes) as per existing suitable for 10.0-12.5HP submersible pump sets complete all as specified and directed.

Pump shaft 25.4mm dia stainless steel as per existing suitable for 10.0-12.5HP submersible pump sets complete all as specified and directed.

GM impeller as per existing suitable for 30.0HP submersible pump sets complete all as specified and directed.

Intermediate bowl as per existing suitable for 30.0HP submersible pump sets complete all as specified and directed.

Bowl bush (rubber) as per existing suitable for 30.0HP submersible pump sets complete all as specified and directed.

Bowl bush (gun metal) as per existing suitable for 30.0HP submersible pump sets complete all as specified and directed.

GM impeller seal ring (neck ring) as per existing suitable for 30.0HP submersible pump sets complete all as specified and directed.

Stainless steel running sleeves (off sizes) as per existing suitable for 30.0HP submersible pump sets complete all as specified and directed.

Impeller locking keys stainless steel (off sizes) as per existing suitable for 30.0HP submersible pump sets complete all as specified and directed.

Pump shaft 25.4mm dia stainless steel as per existing suitable for 30.0HP submersible pump sets complete all as specified and directed.

GM impeller as per existing suitable for 5.0-7.5HP submersible pump sets complete all as specified and directed.

Intermediate bowl as per existing suitable for 5.0-7.5HP submersible pump sets complete all as specified and directed.

Bowl bush (rubber) as per existing suitable for 5.0-7.5HP submersible pump sets complete all as specified and directed.

Bowl bush (gun metal) as per existing suitable for 5.0-7.5HP submersible pump sets complete all as specified and directed.

GM impeller seal ring (neck ring) as per existing suitable for 5.0-7.5HP submersible pump sets complete all as specified and directed.

Stainless steel running sleeves (off sizes) as per existing suitable for 5.0-7.5HP submersible pump sets complete all as specified and directed.

Impeller locking keys stainless steel (off sizes) as per existing suitable for 5.0-7.5HP submersible pump sets complete all as specified and directed.

Pump shaft 25.4mm dia stainless steel as per existing suitable for 5.0-7.5HP submersible pump sets complete all as specified and directed.

PVC impeller as per existing suitable for 1.5-2.0HP submersible pump sets complete all as specified and directed.

Intermediate bowl as per existing suitable for 1.5-2.0HP submersible pump sets complete all as specified and directed.

Bowl bush (rubber) as per existing suitable for 1.5-2.0HP submersible pump sets complete all as specified and directed.

Bowl bush (gun metal) as per existing suitable for 1.5-2.0HP submersible pump sets complete all as specified and directed.

PVC impeller seal ring (neck ring) as per existing suitable for 1.5-2.0HP submersible pump sets complete all as specified and directed.

Stainless steel running sleeves (off sizes) as per existing suitable for 1.5-2.0HP submersible pump sets complete all as specified and directed.

Impeller locking keys stainless steel (off sizes) as per existing suitable for 1.5-2.0HP submersible pump sets complete all as specified and directed.

Pump shaft 25.4mm dia stainless steel as per existing suitable for 1.5-2.0HP submersible pump sets complete all as specified and directed.

GM impeller as per existing suitable for 15.0HP submersible pump sets complete all as specified and directed.

Intermediate bowl as per existing suitable for 15.0HP submersible pump sets complete all as specified and directed.

Bowl bush (rubber) as per existing suitable for 15.0HP submersible pump sets complete all as specified and directed.

Bowl bush (gun metal) as per existing suitable for 15.0HP submersible pump sets complete all as specified and directed.

GM impeller seal ring (neck ring) as per existing suitable for 15.0HP submersible pump sets complete all as specified and directed.

Stainless steel running sleeves (off sizes) as per existing suitable for 15.0HP submersible pump sets complete all as specified and directed.

Impeller locking keys stainless steel (off sizes) as per existing suitable for 15.0HP submersible pump sets complete all as specified and directed.

Pump shaft 25.4mm dia stainless steel as per existing suitable for 15.0HP submersible pump set complete all as directed

Thrust plate suitable for 10-12.5HP submersible pump set all as specified and directed.

Thrust plate suitable for 5-7.5 HP submersible pump set all as specified and directed.

Thrust plate suitable for 15 HP submersible pump set all as specified and directed.

Thrust plate suitable for 30HP submersible pump set all as specified and directed.

Dismantling/opening of monoblock/ centrifugal pump including induction motor of capacity 10.0-15.0HP after disconnecting all electrical connections and taking out the same from foundation for complete servicing with materials including cleaning, lath work of shaft, re-assembling & re-installation of the same on existing foundation including making all electrical connections and testing on completion complete with replacement of the following items/parts all as specified and directed:-

M&L for rewinding of motor with and including super enamelled copper winding wire of existing gauge & No of turns, re-insulating, two coats varnishing & heating including cutting and taking out existing burnt winding complete all as specified and directed..

Replacement of all defective parts of pump set of existing size & make complete all as specified and directed. Note:- All defective parts shall be measured and paid separately under respective item of Sch ‘A’ as supply only.

Dismantling/opening of monoblock/ centrifugal pump including induction motor of capacity 5.0 TO 7.5 HP after disconnecting all electrical connections and taking out the same from foundation for complete servicing with materials including cleaning, lath work of shaft, re-assembling & re-installation of the same on existing foundation including making all electrical connections and testing on completion complete with replacement of the following items/parts all as specified and directed:-

M&L for rewinding of motor with and including super enamelled copper winding wire of existing gauge & No of turns, re-insulating, two coats varnishing & heating including cutting and taking out existing burnt winding complete all as specified and directed.

Replacement of all defective parts of pump set of existing size & make complete all as specified and directed. Note:- All defective parts shall be measured and paid separately under respective item of Sch ‘A’ as supply only.

Supply only the following parts/ items of monoblock/ centrifugal pump set and bowl assembly for replacement of parts/ items under item Nos. 21 to 22 above complete all as specified and directed:-

Ball bearing suitable for 10.0-15.0HP monoblock/ centrifugal pump set complete all as specified and directed.. Make:- SKF/ NBC/ Tata as approved.

SS bush as per existing suitable for 10.0-15.0HP monoblock/ centrifugal pump set complete all as specified and directed.

MS sleeves as per existing suitable for 10.0-15.0HP monoblock/ centrifugal pump set complete all as specified and directed..

Ball bearing suitable for and upto 5.0 - 7.5 HP monoblock/ centrifugal pump set complete all as specified and directed. Make:- SKF/ NBC/ Tata as approved.

SS bush as per existing suitable for and upto 5.0-7.5 HP monoblock/ centrifugal pump set complete all as specified and directed.

MS sleeves as per existing suitable for and upto 5.0-7.5 HP monoblock/ centrifugal pump set complete all as specified and directed.

MS Impeller suitable for 5.0 -7.5 HP centrifugal/monoblock pump set complete all as specified and directed.

MS Impeller suitable for 10.0 -15 HP centrifugal/monoblock pump set complete all as specified and directed.

S&F in repairs 100mm dia pressure gauge of scale 0-15 kg/cm² with FI clamp of size 25x3mm & 15mm socket complete all as specified and directed. Make:- Guru/ Febig as approved.

Supply and laying or fixing or passing in well/ borewell in replacement, 1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor submesible cable of size 2.5sqmm 3 core flat including connection to submersible motor/ starter panel with & including necessary jointing materials if required and testing on completion complete all as specified and direced.

Supply and laying or fixing or passing in well/ borewell in replacement, 1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor submesible cable of size 6.0sqmm 3 core flat including connection to submersible motor/ starter panel with & including necessary jointing materials if required and testing on completion complete all as specified and direced.

Supply and laying or fixing or passing in well/ borewell in replacement, 1100 volts grade heavy duty, PVC insulated and PVC sheathed mutistranded copper conductor submesible cable of size 10.0sqmm 3 core flat including connection to submersible motor/ starter panel with & including necessary jointing materials if required and testing on completion complete all as specified and direced.

S&F MS nuts, bolts and washers etc of required shape & size complete all as specified and directed.

S&F in replacement wall mounted cubical type panel board with locking arrangement and comprising of starter, capacitor, volt meter, indicator lamp, Amp meter & MCB/cut out of capacity suitable for upto 2.0 HP single phase submersible pumping set including fixing arrangement complete all as specified and directed.

S&F in repairs MU-G05H DOL starter of relay range 14-24 Amps of capacity suitable for 05.0 HP motor, AC-3duty, 415 volts, 50 Hz, three phase including fixing arrangement complete all as specified and directed. Make : L&T or equivalent make of Havells/ Crompton Graves/C&S

S&F in repairs MU-G10H DOL starter of relay range 28-42 Amps of capacity suitable for 10.0 HP motor, AC-3duty, 415 volts, 50 Hz, three phase including fixing arrangement complete all as specified and directed. Make : L&T or equivalent make of Havells/ Crompton Graves/C&S

S&F in repairs MU-G20H fully automatic star- delta starter of relay range 28-42 Amps of capacity suitable for and upto 20.0 HP motor, AC-3duty, 415 volts, 50 Hz, three phase including fixing arrangement complete all as specified and directed. Make : L&T or equivalent make of Havells/ Crompton Graves/C&S

S&F in repairs MU-G30H fully automatic star- delta starter of relay range 30-50Amps of capacity suitable for and upto 30.0 HP motor, AC-3duty, 415 volts, 50 Hz, three phase including fixing arrangement complete all as specified and directed. Make : L&T or equivalent make of Havells/ Crompton Graves/C&S

S&F in replacement fully automatic Star-Delta motor starter in sheet steel enclosure type ML-4 FASD suitable for motor rating AC-3 duty , 415 V, 3 phase, 50 Hz, upto 50 HP, relay setting 45 to 75 Amps Cat No-SS90730 Make- L&T or equivalent/C&S

S&F in replacement fully automatic Star-Delta motor starter in sheet steel enclosure type ML-6 FASD suitable for motor rating AC-3 duty , 415 V, 3 phase, 50 Hz, upto 75 HP, relay setting 90 to 130 Amps Cat No-SS90913 Make- L&T or equivalent/C&S

Supply and fixing in repairs MS well cap on the top of PVC/MS casing pipe of dia 200/ 250mm, internal threaded with locking arrangemnt including making provision for passing of 80/ 100mm dia column pipe thorough as required at site complete all as specified and directed.

Supply and lowering in replacement submersible pump set of capacity 5 HP,3 phase,50 Hz, 240 LPM at 57 Mtr Head, delivery size 50mm, stage 11 complete all as specified and directed. Make- kirloskar Model No-KS6B-0511 pr equivalent in Crompton/KSB

M&L for sign board in replacement of size 1200mmx1000mm made out of MS sheet of 16 SWG including preparation of both side surfaces and applying two coat of synthetic enamel paint over a coat of red-oxide primer and after painting/ prepration of surfaces, write the name of office & area location on both side with and including radium film sticker letters & numbers as required including fixing the sign board on MS framed structrue with & including suitable size nuts/ bolts/ screws complete all as specified and directed. Notes:- (i) Size of radium film sticker letters & numbers shall be as approved by Engineer-in- Charge.. (ii) M&L for MS framed structure shall be measured and paid separately under respective item of Sch'A'.

M&L for making of computerised colour/ printed layout plan and brief details i.e history of installation/ machinery of various installations on and including 1.0mm thick plastic laminated acrylic sheet of size 1500x1200mm fixed to new hard boards with & including PVC beading of suitable size fixed to all edges of board with & including mild steel screws of suitable size complete all as specified and directed. Note:- Details i.e layout plan and brief details shall be provided by Engineer-in-Charge separately during execution.

M&L for mild steel in replacement conforming to Fe-290 (Gde E-165) in framed work for supporting/ fixing of sign boards/monoblock pumpset and similar work including necessary welding, cutting/ making holes of required size & shape for supporting/ fixing of monoblock/sign board complete all as specified & directed.

M&L for PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in foundation, filling, mass concrete for fixing of MS framed structrue including necessary excavation and earth work complete all as specified & directed.

M&L for PCC1:2:4 type B1 20 mm grded stone aggrergate as in foundation filling and mass concrete complete all as specified and directed.

Supply only O- Tolidine chemical in 500ml pack all as specified and directed. Make Qualigens or equivalent

Supply only residual chlorine kit for testing of chlorine content in water all as specified and directed.

Supply and fixing in replacement PVC insulated multistranded copper conductor cable of size 25 sqmm single core electric panel board complete all as specified and directed.

Supply and fixing copper lugs suitable for 25 sqmm cable all as specified and directed.

Supply and laying PVC flexible pipe of size 50sqmm complete all as specified and directed.

M&L for painting of centrifugel motor pump set of capacity 60/75 HP with two coat of gray enemalled paint after scraping old paint including writing SM/MES No on pump/Motor with white colour complete all as directed.Note: letter size should not less than 20 mm in height all as specified and directed..

M&L for painting of centrifugel motor pump set of capacity 40 HP with two coat of gray enemalled paint after scraping old paint including writing SM/MES No on pump/Motor with white colour complete all as directed.Note: letter size should not less than 20 mm in height all as specified and directed.

M&L for painting of centrifugel/monoblock motor pump set of capacity 7.5-15 HP with two coat of gray enemalled paint after scraping old paint including writing SM/MES No on pump/Motor with white colour complete all as specified and directed.

S&F in replacement 3 HP single plunger car washer set of max pressure 22 kg/cm2 with 3 HP three phase motor of 1410 RPM IP 55 with and including all necessary connection complete all as specified and directed. Make- ATS ELGI model- LL03022 or equivalent

S&F in replacement automatic water softner plant vertical 4" with outer shell of Epoxy Filament wound and inner shell of Polyethylene with max working pressure of 10 bar with and including all necessary connection complete all as specified and directed. Make- Ion Exchange model- 1354 or equivalent

S&F in repair/replacement pressure switch suitable for existing pressure booster pump of 0.6/ 1 HP complete all as specified and directed. Make- Danfoss/Kirloskar or equivalent Complete all as directed.

S&F in replacement monoblock pump set of cap 1.0 HP including all necessary connection complete all as specified and directed.

Supply and lowering in replacement submersible pump set of capacity 1.5 HP,single phase,50 Hz, 70 LPM at 57 Mtr Head, delivery size 32mm,stage 13 complete all as specified and directed. Make- kirloskar Model No-KP4-0713S pr equivalent in Crompton/KSB

S&F MCCB 4 Pole Thermal adjustable breaker and adjustable Magnetic type complete all as specified and directed of following capacity

250 AMP, 36 KA

400 AMP, 36 KA

S&F MCCB 4 Pole Thermal adjustable breaker type complete all as specified and directed of following capacity

63 AMP, 25 KA

125 AMP, 25 KA

160 AMP, 25 KA

Dismantling of dozing pump for carrying out comprehensive/ preventive/ repairing work, checking rectifying defects as assured in day to day operation for overhauling required, refitting and reinstalling the plant after replacement of defective parts including testing etc complete including checking electrical system and day to day maintenance of plants requried at water supply installation by a skilled tradesman complete all as specified and directed. Notes:- i. Spares parts requried shall be mearured & paid separately under respective items. ii. Only those plants shall be measured and paid which will be repaired by providing several major defective items/ parts. iii. The quoted cost shall be deemed to be included for complete checking of dozing pumps installed at different locations.

Supply only following parts for dozing pumps of any make at site :-

Gear motor suitable for 230 Volts, 50 Hz, AC supply of existing model complete all as specified and directed.

Rotor assembly with bearing brackets and tolerance rings of existing model complete all as specified and directed.

Coil 250V, 50 Hz of existing model complete all as directed all as specified and directed..

Single head feed rate control with shaft of existing model complete all as specified and directed.

07 Pump head complete set (Ferrules 1/4" and Duckbill) of existing model complete all as specified and directed..

Roller assembly of existing model complete all as specified and directed.

7 Pump tube of existing model complete all as specified and directed.

Injecter check valve 3/8" of existing model complete all as specified and directed.

3/8" white suction/ discharge tubing of existing model complete all as directed.

Check valve duck bill of existing model complete all as specified and directed.

Connecting nut 3/8" of existing model complete all as specified and directed.

Ferrule 1/4" of existing model complete all as specified and directed.

FRP dozing tank of existing model of capacity 100 Ltr having port hole for passing chlorine including provision for mounting motor and level gauge complete all as specified and directed.

Vertical turbine agitator motor of capacity 1/4 HP suitable for 230 Volts, 50 Hz of existing model complete all as specified and directed.

PVC weighted suction line strainer 3/8" of existing model complete all as specified and directed.

Riveting screw of existing model complete all as specified and directed.

Complete shaft with impeller of existing model complete all as specified and directed.

Screws of existing model complete all as specified and directed..

Ring Seal of existing model complete all as specified and directed.

Ball ( Part No RDC08202 ) of existing model complete all as specified and directed.

Suction Valve of existing model complete all as specified and directed.

Discharge Valve of existing model complete all as specified and directed.

Tubing Connector of existing model complete all as specified and directed.

Tubing of existing model complete all as specified and directed.

Foot Valve of existing model complete all as specified and directed.

Antisyphon Valve of existing model complete all as specified and directed.

Diaphram of existing model complete all as specified and directed.

Oil Seal of existing model complete all as specified and directed.

Spring of existing model complete all as specified and directed.

S S Shaft of existing model complete all as specified and directed.

Retainer Plate of existing model complete all as specified and directed.

Solenoid Coil of existing model complete all as specified and directed.

Stroke Control Shaft of existing model complete all as specified and directed.

Electronic Module of existing model complete all as specified and directed..

Pump housing of existing model complete all as specified and directed.

Dozing Head of existing model complete all as specified and directed.

Spacer of existing model complete all as specified and directed.

S & F Piano type socket 3/5 pin, 5 Amps, 230 Volts of existing model complete all as specified and directed.

S & F in repair Piano type switch, 5 Amps, 230 Volts of existing model complete all as specified and directed.

S & F in repair Plug top, 5 Amps, 230 Volts of existing model complete all as specified and directed.

S & F in repairs nylone pipe 15 mm bore , heavy duty, complete all as specified and directed.

S&F in repairs 15 mm bore PVC gate valves, ISI marked, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs 15 mm bore PVC pipe including necessary fittings ( ie socket, bend etc) ISI marked, complete all as specified and directed.

M&L for rewinding of electric motor 1 phase 230 volts, 1/4-1/2 HP with and including super enamelled copper winding wire of superior quality of existing size/ gauge & No of turns with and including of material such as varnish, cotton tapes, bush/bearings etc including cutting and taking out existing burnt/ short circuited winding wires complete all as specified and directed.

NOTE:- Contractor will responsible to carry out testing of chlorination water of different location as required by SHO / User and testing report will be produced to Engineer-in-Charge on daily basis after taking signature by SHO or his rep. No extra payment shall be made on this account.

M/s Singh Electric Co

AGRA AND COMPANY

SOHAMM ENGINEERS