8166/GWL/E8 CERTAIN REPAIR TO FLOOR, TOILET AND KITCHEN REPAIR PLUMBING AND SANITARY FITTING AND CONNECTED ITEMS IN CERTAIN OTM ACCN UNDER AGE B/R-II

Amount

Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 15mm bore of pipe, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 25mm bore of pipe, complete all as specified and directed.

Supply and laying 20 mm dia of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and as directed.

Supply and laying 25 mm dia of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and as directed.

S&F for 15mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling etc complete all as specified and as directed.

S&F for 20 mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling etc complete all as specified and as directed.

S&F for 25mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling etc complete all as specified and as directed.

M&L for 75 mm dia of outlet PVC (SWR) floor trap plain with CP grating including jointing with solvent cement as in repair complete all as specified and as directed.

S&F for renewal of 15mm pillar taps Fancy type long body chromium plated, cast copper alloy with brass ceramic disc spindle and capston heads, screwed down high pressure, with or without lettered 'hot' or Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed.

S&F for renwal of 15mm angle cock chromium plated, cast copper alloy with brass ceramic disc spindle and capston heads screwed down high pressure, with or without lettered 'hot' or Cold' with long screwed shanks and flynuts, screwed for iron pipe fixed and complete all as specified and directed .

S&F for renewal of 15mm bib tap Fancy type long body chromium plated, cast copper alloy, with brass ceramic disc spindle and capston heads, screwed down high pressure, with or without lettered 'hot' or Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and as directed.

S&F for renewal of shower rose brass chromium plated without swivel joints, 125mm size including fixing to steel pipe complete all as specified and directed.

S&F for renewal of 15 mm Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions complete all as specified and directed.

S&F for renewal of Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F for renewal of Health Faucet with one meter PVC flexible body pipe of CP including fixing bracket, complete all as specified and directed.

S&F for renewal of wall mixer with Two in one pattern in of brass CP, complete all as specified and directed.

S&F for Sink Mixer with swinging spout on upper side (wall mounted model) with connecting legs & wall flanges complete all as specified and directed.

S&F for renewal of Soap dish of CP fixed with PVC rawal plugs and screw, complete all as specified and directed.

S&F for renewal of CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.

S&F for renewal of peg set of six aluminium fixed to wall with PVC plugs and screw, complete all as specified and directed.

Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm, complete all as specified and directed.

S&F for renewal of Flushing jet Spray (chromium plated) for padestral pattern EWC including 1.00 metre tube flexible pipe and brass chromium plated nuts completed all as specfied and directed

S&F for renewal of 15mm dia 2 Way Chromium plated angle cock of with flange complete all as specified and directed.

S&F for renewal of mild steel Chromium plated grating 100 mm dia complete all as specified and directed.

S&F for renewal of Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triplr layer in construction white in colour hoisted and fixed in position complete all as specified and directed.

S&F for renewal of Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triplr layer in construction white in colour hoisted and fixed in position complete all as specified and directed.

S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F for renewal of 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm dia of pipe (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F for renewal of gun metal globe /valve with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed.

S&F for renewal of gun metal globe / valve with iron wheel head screwed both ends for iron pipe of 25mm bore, complete all as specified and directed.

Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning etc and reconnecting and refixing in position capacity of tank exc 500 and n.exc 1000 ltr (cleaning, repairing etc measured separately) complete all as specified and as directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capacity of tank exc 250 ltrs but n.exc 500 Ltrs complete all as specified and as directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capacity of tank exc 500 ltrs but n.exc 1000 Ltrs complete all as specified and as directed.

S&F in renewal of sinks with drainage board made out of stainless steel 0.90 mm thick kitchen or laboratory with plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F for plate rack of size 3'X2.5' made out of 0.90 mm thick stainless steel of wire type / sheet pattern size and type as directed and approved by GE fixed to wall with necessary fitting arrangement complete all as specified and directed.

S&F for sinks made out of stainless steel 0.90 mm thick kitchen or laboratory with plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F for renewal of viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts, flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed.

S&F for renewal of plastic water closet seat covered white coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devise complete all as specified and directed.

M&L for renewal of vitreous china squatting pan, orissa pattern size 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete and making good to floor, complete all as specified and directed.

S&F for renewal of vitreous china wash basin, white, flat back, size 550 x 400mm including waste coupling, 32mm dia waste pipe and labour for fixing pillar tap, PVC connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. Note : Pillar tap and PVC connection will be measured and paid separately.

S&F for renewal of vitreous china wash basin, white, oval type, size 550 x 400mm including waste coupling 32mm dia waste pipe and labour for fixing pillar tap PVC connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. Note : Pillar tap and PVC connection will be measured paid separately.

S&F for renewal of PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float end handle including bracket complete of capacity 10 litres, complete all as specified and directed.

Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and directed.

S&F for 18 mm thick PVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws solvent cement /adehesive complete all as specified and directed.

S&F for 12 mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws solvent cement /adehesive complete all as specified and directed.

S&F for aluminium anodised barrel tower bolts of extruded section of 100mm size, complete all as specified and directed.

S&F for continuous (piano) hinges mild steel bright finish or electro galvanised width of flaps n.exc 30 mm (when open), complete all as specified and directed.

S&F for extruded aluminium alloy handle of 100 mm size fabricated type, anodised complete all as specified and directed.

S&F for Haps and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size sixed with screw complete all as specified and directed.

S&F for magnate catcher of metal body and striking plate heavy duty including fixed with screw, complete all as specified and directed.

S&F for corner glass shelf 300mm (with ABS Bracket) complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket and guard and railing 60cm long completed all as specified and directed.

S&F 25mm dia stainless steel curtain rod not less than 0.80mm thick including fixing of sufficient brackets (minimum 2 nos at every 1.50m length) & end Knobs complete all as specified and directed.

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each, removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as required complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each, removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as required complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed.

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting to frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

Same as Item No 61 but wire gauge panel i.e. panel should be wire gauge in lieu of PVC sheet panel, wire gauge shall be wraped on a additional squre tube 8 mm M.S. solid tube shall be welded to M.S tube and wire guage shall be streched tightly firmed complete all as specified and as directed.

S&F for 30 mm thick Flush shutters soild core construction with particle board core and plywood face panels, commercial type both face is covered with decorative face veneer with lipping /frame to match and complete all as specified and directed.

M&L for New surface of wood and wood based material any description and in any position over 10 cm width or girth and M&L for applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F for renewal of floor door stopper of brass body and tongue, overall length of cover plate 150 mm, anodized, with hard drawn steel spring, fixed to shutters complete all as specified and as directed.

S&F for stainless steel butt hinges of 100mm size complete all as specified and directed.

S&F for Extruded aluminium alloy handle of 150 mm size fabricated type, anodised complete all as specified and directed.

S&F for aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified and directed.

M&L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

M&L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track) without sash, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware i.e. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc complete all as specified and directed. Note : Panel filling i.e. glass, fibre sheet, board, wire mesh etc shall be measured and paid for separately.

M&L for Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size 2 Nos, 3 Nos powder coated aluminium hinges heavy duty and 02 Nos 150mm long powder coated aluminium tower bolts in each door shutter with powder coated aluminum snap beading, screws etc complete all as specified and directed. Note : Panel filling i.e. glass, fibre sheet, board etc shall be measure and paid for separately.

S&F for 4 mm thick ACP board both side lamination fixed with screws complete all as specified and directed.

S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised staples complete all as specified and directed.

S&F for framed work such as grills gratings, etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290, E-165 complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint as one coat including preparation of new Steel surface over 10 cm width or girth complete all as specified and directed.

Dismantiling of stone slabs and tiles (Kota stone etc) of any discription or any thickness in floors, aprons, skirting, dado etc laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

Demolition of concrete of any description and in position not otherwise specially provided for complete all as secified and directed.

M&L for vitrified, light coloured and printed tiles of 8 to 10 mm thick (Square / Rectangular) polished area of each tiles not exceeding 0.36 Sqm as in flooring over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for vitrified coloured and printed tiles of width as directed and 8 to 9 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for non skid ceramic tiles, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7mm thick on vertical faces i.e. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.

M&L for non skid ceramic Coloured tiles, 300mmx300mmx 6 mm to 7mm thick, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L for Granite slab 18 mm to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms including rounding off the exposed edges and polishing complete all as specified and as directed.

M&L for machine cut Kota stone slab 18 mm to 22 mm thick, as in flooring, laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:4) complete all as specified and directed.

M&L for machine cut kota stone slab 10 mm -15 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:3) complete all as specified and directed.

Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius, in half brick work built in cement mortar 1:4 complete all as specified and as directed.

M&L for 75mm thick PCC (1:2:4) Type C2 using 40mm graded stone aggregate as in plinth protection surface even and fair without using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and as directed.

M&L for PCC Type D2 (1:4:8) using 40mm graded stone aggregate as in foundation filling mass concrete, complete all as specified and directed.

M&L for PCC (1:2:4) Type B-0 using 12.5 mm graded stone aggregate as levelling course/mass concrete complete all as specified and directed.

M&L for PCC (1:2:4) Type B-1 40 mm thick using 20 mm graded stone aggregate as floor surfaces concrete complete all as specified and directed.

M&L for vitrified paver color tiles 40 cmx40cmx9 to 10 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

Demolition of wall and ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed.

S&F Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of semi perforated 12mm thick micro tegular edged GRG of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS tiles 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge complete all as specified and as directed.

S&F for renewal of vitreous china urinals, Half stall type, white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F for renewal of 5mm thick PVC sheet fillet of width 35mm for wall panelling (At the spacing of 1 feet centre to centre) inclusive of fixing on to wall to make PVC Frame as per secification and drawing comlplete all as specified and directed.

S&F in renewal of Solid PVC Wall Lining consisting of 5mm thick Plain wood grain printed PVC sheet inclusive of solvent cement and fixing at site on to wall to make PVC Frame as per specification and drawing comlplete all as specified and directed.

S&F for renewal of 3mm thick, plain glass pin head type and glazing with oil putty, silicone or wooden beads, in square not exceeding 0.5 sqm in each pane including hacking out old broken glass of any thickness and any description from wooden/ steel frame/ stone, concrete or brick surrounds complete all as specified and directed.

S&F for renewal of galvanised wire cloth, 0.48 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "

M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of wall & applying 3 coats of white wash on wall surfaces complete all as specified and directed.

M&L for two coats of oil bound emulsion paint over a coat of Birla wall care putty on newly plastered surfaces on wall including preparation of surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash complete all as specified and directed.

Supply only Liquid water proofing compound complete.

M&L for 10 mm thick rendering in CM (1:3) over floor/wall, surface finished even and smooth mixed with water proofing compound complete all as speceified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "

M&L Plain cement concrete (1:5:10) type E2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified and directed.

M&L for Two or more coats of Epoxy (hardener and raisner) coating over primer over new prepared wall/ floor surfaces complte as in sunken portion complete all as specified and as directed.

Material and labour for Preparation of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Material and labour for Preparing of old decorated surface of Ceilings of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Material and labour for Preparing of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of oil emulsion complete all as specified and directed.

M&L for complete removal of existing treatment (internal and external suraces) on walls by scrapping with steel wire brush or any other means including one coat of wall care putty on wall and applying two coats of oil emulsion complete all as specified and directed.

Material and labour for prepration of old or untreated surfaces of wood or wood based surfaces and applying one coat of synthetic enamel paint over a prime coat of pink primer on surfaces of any desription, not otherwise described, over 10 cm width or girth complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint on steel or iron surfaces of any description, over 10 cm in width or grith, not otherwise described including preparation of surfaces and over a coat of red oxide complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) of any description and in any position, including all fittings, heads, shoes, bends, swan necks, etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F for 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all specified and directed.

S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F for 110mm dia PVC(SWR) pipes bends any radius \ complete all as specified and directed.

S&F for 75 mm dia PVC(SWR) pipes bends any radius complete all as specified and directed.

S&F for 110mm dia PVC(SWR) pipes bends any radius \ complete all as specified and directed.

S&F for 75 mm dia PVC(SWR) pipes bends any radius complete all as specified and directed.

S&F for 110mm dia PVC(SWR) pipes junction, single (single T/Y) equal or unequal any radius with access door, complete all as specified and directed.

S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed.

M&L for renewal of 75 mm dia of out let PVC (SWR) floor trap plain with CP grating including jointing with solvent cement complete all specified and directed.

S&F for renewal of full Brass urinal Spreader chromium plated, cast copper alloy, with brass ceramic disc spindle and capston heads, screwed down high pressure for iron pipe fixed and complete all as specified and directed.

Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed.

S&F for Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 (Gde E-165) complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.

S&F for 12mm thick tuffended designer glass fixed on steel pivot all as approved sample with engravings/ designs/ symbols to the pattern and style as approved and directed.

S&F for 'D' type stainless steel handle decorative type 300mm long bright finished all as per design/ pattern approved by Engineer-in-Charge.

m/s yadav builders (BID ID -3382166)

M/s Subhash Construction Co. (BID ID -3375481)