Installation of semi-high mast lights in Nayaboss Narendra Garhi of Barauli Assembly Constituency 72

Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100 mm, Bottom dia 200 mm and base plate 16mm thick) having 3 mm thikness with pip Rig Dia 50 mm for flood light in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect.

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect. CAT.AAA (SOR - 2018 Item no.1454

Supply and Wiring of submains with 2 nos. of 4 sq. mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductorcable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge (SOR - 2018 Item no.289(A)

S/F Of Following capacity of automatic street light cubicle control pannal with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses isolating swtichmateringinstument and instument box with cts etc. in case of TPN,(15ATPN) complete in all respect, (SOR -2018 Item no.807(A) (ii)

S/F of following size DWC HDPE pipe ISI marked along with all accessories like socket bend, coppers etc. confirming to is 1493 part-11 complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level), including excavation refilling the trenches but excluding sand cushioning and protective covering at complete as required 63 mm dia (OD)-63mm & 51 mm (ID)

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.10 sq. mm (SOR - 2018 Item no.504 (c)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (SOR - 2018 Item no.501 (b) 16 sqmm 2 core

S&F of 0.5 Amp to 5 Amp. SP MCB (10KA) C Curve (SOR - 2018 Item no.1001

Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.(SOR - 2018 Item no.717

Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm squareC.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in- charge complete in all respects as per drawing. (SOR -2018 Item no.701