Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.3 LAccepted-AOC SHOP NO 4 GULATI MARKET KRISHNA NAGAR NEHRU GARDEN ROAD JALANDHAR PUNJAB 144001 | JALANDHAR | PUNJAB | 144001 | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹16.5 L+₹43,161.75 (2.69%)Rejected-Finance | L2 | Rejected-Finance Other than the lowest bid | |
| 3 | L3₹17.6 L+₹1.6 L (10.1%)Rejected-Finance | L3 | Rejected-Finance Other than the lowest bid | |
| 4 | L4₹18.3 L+₹2.3 L (14.4%)Rejected-Finance | L4 | Rejected-Finance Other than the lowest bid | |
| 5 | L5₹18.7 L+₹2.7 L (16.8%)Rejected-Finance | L5 | Rejected-Finance Other than the lowest bid |
Tender Value
₹18 L
EMD Value
₹36,000
Closing Date
1 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer West Jalandhar Cantt
Kabir Road Jalandhar Cantt
CERTAIN REPAIR/ MAINTENANCE TO OTM ACCN IN AREA A-3 OF AGE B/R-I UNDER GE (WEST) JALANDHAR CANTT
2022_MES_549799_1
GE/JAL(W)-46/2022-23
Open Tender
Civil Works
Item Rate
273 days
Jalandhar Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer West Jalandhar Cantt
₹36,000
Yes
8 Oct 2022
5 Sept 2022
3 Oct 2022
5 Sept 2022
1 Oct 2022
19 Sept 2022
Amount
Demolition of cement concrete in ground floors and pavings not exc 15 cm thick below or above ground level.
M & L for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates as in path and in plinth protection finished fair and even.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match,and including 15mm thick screed bed in cm 1:6.
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match ,and including 15mm thick screed bed in cm 1:6.
Ditto as above item no 5.00 but in vertical surface including 10mm thick backing coat of Cm 1:4.
M&L for ceramic coloured tiles of size 300x200mmx6-7mm thick, on verticals surfaces, set and jointed inneat cement slurry and pointed in coloured cement to match including 10mm thick backing coat plaster in CM 1:4
M & L chequered cement concrete tiles 30cmx 30cm x 25mm with grey cement and pigment set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM 1:6,complete all as specified
M & L Sand filling under floors or in foundations including watering and consolidation
M&L for machine pressed precast concrete interlocking paver block with Gery cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade
Fixing only 500 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description complete all as specified.
S&F in repairs vitreous China orissa pattern water closet size 580mmx440mm white with integral foot rest.
S&F in repair vitreous china white wash hand basin flat back size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but excluding waste pipe
M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
S&F in repairs 10 ltrs PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified and directed by Engr in Charge.
Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store.
All as per item No 16.00 here-in-before but 20mm dia .
S&F steel tubes medium grade galvanised with all fittings and fixed complete to wallsand ceiling or laid in floor bore of pipe 15mm dia & making good the same with Cement Concrete I:2:4.
All as per item No 23 herein before but 20mm dia.
S&F in repairs for 15mm dia of pipe bib taps, cast copper alloy fancy type and chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed bothends for iron pipes or for Unions and fixed.
S&F in repair 20mm bore of pipe ball valves high pressure of PTMT with eppoxy coated aluminium rod & high density polythene ball screwed for iron pipe and fixed. (Min weight for 20mm - 210 gms)
S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete
S&F in repair pillar taps, cast copper alloy with capstan heads chrominm plated fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, srewed for iron pipe and fixed 15mm bore.
S&F in repairs Chromium plated grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap.
S&F in repairs tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties)
S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, capacity 500ltr
Dismantling of cast iron drain 75/100 mm dia from floor/walls etc and taking out of trenches/floors.
M&L for cast iron soil waste and vent pipe sand cast any length with or without ears with cement joints fixed to walls 75mm dia
All as per item No 30.00 above but bore of pipe 100mm dia.
M&L cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) Diameter of outlet in 75mm.
M& L Cement concrete type E-2, 1:5:10 using 40mm brick aggregate as in sunken floor.
M&L for 15mm thick rendering in 1:3 Cement Mortar with using 3% Water Proofing Compound as in sunken portion complete all as directed.
M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg per squqre mtr including cleaning surfaces.
Taking down shutters of any description n exceeding 1 Sqm each
Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each.
S& F for Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides
S&F 2nd class factory made hardwood glazed and Skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part I section 8 clause 8.20 (b)
Prelaminated decorative particle board Gde-1 quality exterior grade prelaminated both sides with decoratve choice lamination commercial type fixed with screw to timber frame 18/19mm thick as in CB, shelf drawer etc (in narrow width not exc 15 cm) fixed in repair complete all as specified and directed.
Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per direc
S&F Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture1.18mm and fixed with tinned tacks, or galvanised wire staples.
M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane.includingHacking out old broken glass of any thickness size or description from wooden frames or metal frames fixed with wooden beads/ putty.
S & F aluminium tower bolt anodised of extruded section 200mm
S &F in repair aluminium anodised 300 mm sliding door with hasp staple (bolt type) and fixing clipsof sheet cast or extruded section and fixing bolts and sliding both of extruded sections.
S & F aluminium anodised type anodised handles 150 mm
S&F Butt hinges, medium weight cold rolled mild steel 100mm size.
S&F Butt hinges, medium weight cold rolled mild steel 75 mm size.
S&F for 125 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws
Supply & fixing Mild Steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate fixing by screw ,welding, etc as per requirement and complete all as spd and as directed .
S & F mild steel powder coated pelmet rods including 02 Nos of brackets and finnels complete all as specified and as directed by theEngr in charge
Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed
M&L for brickwork with subclass 'B' old size bricks, straight or curved on plan exc 6 metre mean radius , built in cement mortar 1:6
Taking down cement plaster including raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and as directed.
M&L for rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick in Cement Mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement
M & L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper(white or tinted) over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge.
M & L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge.
M&L for prepration of new plaster surfaces of walls & applying two coats of exterior emulsion paint over a coat of wall primer and complete all as manufacurers instructions and directed by Engr -in-charge..
M & L for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and as directed by Engr-in-Charge.
M & L for preparation of old surface of walls and applying one coats of oil bound distemper(white or tinted) complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of new wooden surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer
S&F aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and as directed by the Engineer-in-Charge.
M&L for anoised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and as directed by Engr-in-Charge.
M&L for anoised aluminium window and ventilattor shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and as directed by Engr-in-Charge.
S & F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty
S&F for sheet glass 5.50 mm thick ordinary quality and glazing with ail putty in squares exc 0.5 Sqm each pane complete all as specified and directed by Engineer-in-Charge
Supplying and Fixing plain colour PVC sheet 6mm thick fixed in Aluminium frame work by using suitable adhesive/fixing clips all as specified and directed by Engr-in-Charge.
Material and labour for Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mmx25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two openable leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. (Four Nos for each window) including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100mm long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD-06/07. (Note: Wire gauge shall be measured and paid for separately).
ditto above item no 69.00 but as in glazed windows.
HYLAND CONSTRUCTION COMPANY
G S TRADERS
JAGDISH KUMAR SEHGAL
AAY KAY ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .