Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.5 LAccepted-AOC EAST VIVEKANANDAPALLY RABINDRA SARANI SILIGURI 734 006 DIST DARJEELING W B | JALPAIGURI | WEST BENGAL | 734006 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹49.3 L+₹3,859.40 (0.08%)Rejected-Finance VILL DANGAPARA NEAR SAHID BEDI PO RAHARAH PS KHARDAH KOLKATA 700 118 | 24 PARAGANAS NORTH | WEST BENGAL | 700118 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹49.8 L+₹52,061.65 (1.06%)Rejected-Finance 45 9 6 BAGHAJATIN COLONY PO PRADHAN NAGAR SILIGURI 734 403 DIST DARJEELING WB | 734403 | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹49.9 L+₹64,417.60 (1.31%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹49.9 L+₹66,535.25 (1.35%)Rejected-Finance 75 VIDYAPITH ROAD DESHBANDHU PARA SOUTH PO SILIGURI TOWN DIST DARJEELING WB PIN 734004 WB | JALPAIGURI | WEST BENGAL | 734004 | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
23 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Sukna
Garrison Engineer Sukna, Post-Simulbari, Dist.-Darjeeling, WB-734009
CERTAIN REPAIR MAINT OF JOINERY ROOFING KITCHEN CABINET CUPBOARD CEILING AT MANOJ PANDEY VIHAR AND DSTV AREA UNDER AGE BR I OF GE SUKNA
2024_MES_669582_1
GE Sukna/8710
Open Tender
Civil Works
Works
270 days
Sukna
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹0
₹90,000
Yes
23 Nov 2024
2 Sept 2024
25 Sept 2024
2 Sept 2024
23 Sept 2024
16 Sept 2024
2 Sept 2024 - 23 Sept 2024
Amount
Supply only liquid water proofing compound ISI mark.
M&L for filling the gaps at the junction of roof sheet and vertical wall any thickness, any position and on height upto 10m from G.L using cement concrete type C1, 1:3:6 (using 20mm graded aggregate) and finish both side of wall by 15 mm rendering in cement mortar 1:6 and applying two coats of cement base paint to match with existing surface to match including necessary scaffolding complete all as specified and directed.
M& L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting exc. 20 cm in girth complete all as specified and directed.
M&L 15-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like 15 mm thick screed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
M&L 15-18 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in cement mortar 1:3 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement complete all as specified and directed.
S&F 30 mm thick flush door shutters solid core construction, with block board core and plywood face fanels, commercial type on both side with liping/frame to match complete all as specified and directed.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down shutters of any description not exc 1.0 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.
S & F 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
S&F factory made solid panel moulded PVC door shutter with particle board core 30mm thick (stiles) with 2 panel design with 2mm thick moulded PVC sheet on, 4 consisting of frame made out of MS tubes for top & bottom rails, MS frames shall be covered with heat moulded plain colour PVC 'C' channel, the front face & 2mm plain colour PVC sheet on back face in frame at site as per specifications and drawings complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of wire gauze in lieu of plain colour PVC sheet. The wire gauze shall be wrapped on an additional square 8mm MS Solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly, suppling & fixing in the frame at site as per specification & drawing as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
S & F factory made Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
S & F factory made Solid PVC door frame of size 50 mm X 100 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
S&F Plain colour PVC sheet 2 mm thick fixed or laid on to flush doors, bldg shafts etc by using rubber based adhesive, screws / nails etc supplying & fixing at site complete all as specified and directed.
S&F 30 mm thick flush shutters, solid core construction, with MDF board and both face is covered with decorative face veneer with 6mm thick teak wood lipping / frame to match complete all as specified and directed.
S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.
S&F 100 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.
Supply and fix 300 mm long Aluminium alloy, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.
S&F 100 mm Aluminium butt hinge, medium weight, complete all as specified and directed.
S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 40 mm complete all as specified and directed.
S & F in repairs MS Helical door spring 150 mm size including roller and roller plate fixed to wooden or steel frames with welding etc complete all as specified and directed.
S&F 150 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed.
S&F 100 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed.
S&F mortice locks suitable for aluminium door of 100 mm size 4 lever brass body vertical type as per existing or sample complete all as specified and directed.
S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished completed all as specified or as directed.
S&F Hasp and staple 100 mm safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screw complete all as specified and as directed.
S&F in repairs 25 mm dia stainless steel, mild steel, chromium plated curtain rod with & includig suitable fixing CP brackets, stops, rollers etc. complete all as specified and directed.
S&F Decorative type wooden finish double brackets support for holding curtain rods and corner to be fixed to ends of curtain rod fixing with screws complete all as specified and directed.
S & F Floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140 mm complete all as specified and directed.
S&F in repairs Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width of and of weight between 61 to 80 Kg. (extruded section) complete all as specified and directed.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
Supply and fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S & F Mild steel work in framed work such as grills, gratings, framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S & F Joist, channel, angle, flat iron or tee sections, fixed independently, with connecting plates, etc. confirming to Fe 410 -W (Gde-250 quality A) complete all as specified and directed.
S&F Hard drawn steel wire fabric in available size weight not exc 4.00 Kg/Sqm fixed in tank caging and other works welding, riveting, framing etc including dismentaling, complete all as specified and directed
S&F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dove-tailed or welded complete all as specified and directed.
S&F Steel ventilator with top hung shutter and including hinges steel peg stay complete all as specified and directed.
S & F of pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.
S & F of pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.
S&F aluminium powder coated frame work (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates and including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and directed.
S&F Aluminium powder coated door shutters, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised alumnium snap beading, screws etc. complete all as specified and directed
S&F Standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE) for window (sliding three track/two track/fixed or louvers type) and ventilator shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing or gaskets for fixing glass, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking arrangement , screws, plugs, handle, lock, roller nylon ball bearing etc, complete all as specified and directed. Note :- Glass and wire mesh shall be measured and paid separately under respective items.
S&F Checking of aluminium joinery Door / window / ventilator etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, rubber gusket, plug etc. to make it functional complete all as specified and directed. (Note:- Any items required to be replaced shall be paid under respective items).
S&F 0.56 mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing and the like (length and girth as fixed) fixed with nails, screws etc complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F 3 mm thick cover fillets of standard hard board, 40 mm wide, and fixing with screws complete all as specified and directed.
S&F 4 mm thick non asbestos fibre cement building boards (designer pattern) fixed or laid / inserted to and including aluminium framework with screws in false ceiling (flat or sloping) of grid size 605 x 605 mm and including anodised aluminium snap grid frame work for false ceiling hanging from structural steel / scantling with 6 mm GI wire complete all as specified and directed.
M&L in repair 12 mm thick, plywood grade BWR conforming to IS : 303 type BB fixed to screws to timber frame work as in shelves fixed complete all as specified and directed.
S&F in repairs 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination and other side balancing white laminated fixed with screw to timber / aluminium frame work complete all as specified and directed.
M&L for 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
M&L 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling, sub base, mass concrete etc complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20.00 mm graded stone aggregate) as in sub base of flooring etc complete all as specified and directed.
M&L Glazed ceramic tiles coloured 300mmx 450mm , 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete including rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and directed
M&L Non Skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but n. exc. 0.36 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.
M&L Non Skid Ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm, in skirting / Vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete including rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L Rendering 15 mm thick on fair faces of brick work or concrete sur-faces in cement mortar 1:4 using water proofing compound @ 2% by wt of cement for finished even and smooth without using extra cement complete all as specified and directed. Note :- WPC will be measured and paid separately
M&L for rendering 5 mm thick in CM 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed.
M&L preparation of old decorated wall surfaces by brooming down or steel wire brushing scraping down smoke spot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed.
M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.
M&L for preparing old plastered surfaces of ceiling and applying one coats of white wash complete all as specified and directed.
M&L for prepration of new plastered surfaces of wall and applying two coat of oil emulsion distemper over a coat of alkali resistant primer over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed.
M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil emulsion distemper over a coat of alkali resistant primer over a thin layer of wall care putty to obtained smoothness of plastered surfaces complete all as specified and directed.
M&L preparation of old plastered wall surfaces and including applying one coat of oil emulsion distemper complete all as specified and directed.
M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint complete all as specified and directed.
M&L complete removal of existing treatment and preparation of old plastered wall surfaces and including applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.
M&L preparation of new plastered wall surfaces and inlcuding applying two coats of weather coat exterior paint over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed.
M&L for complete removal of existing treatment of old decorated wall surfaces by washing with jet washer machine, removal of nails etc & filling cracks / hole with putty, applying one coat of primer using auto roller and applying a thin layer of thick wall care putty and sanding the same by Vacuum based sanding machine till obtaining even and smooth finish and applying two coats of exterior weather coat paint using auto roller complete all as specified and directed as per manufacturers instructions. Note:-Multipurpose mixer shall be used for uniform and proper mixing of putty.
S & F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads not exc 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.
S&F in repairs 5 mm thick tinted sheet glass ordinary quality fixed with aluminium frame work exc 0.50 sqm in each pane complete all as specified and directed.
S&F 4 mm thick Frosted glass, ordinary type and glazing with oil putty in squares not exc 0.5 Sqm in each pane fixed to steel frame including steel pin complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from steel / wooden frames or stones, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed.
M&L preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of old decorated wooden surfaces of any description, not otherwise described over 10 cm width or girth and including applying one coats of synthetic enamel paint complete all as specified and directed.
M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of old decorated steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coat of synthetic enamel paint complete all as specified and directed.
S&F Steel water tubing and connection medium grade 15 mm bore (Concealed where required) with all fitting fixed to wall, ceiling or laid in floors complete all as specified and directed.
S&F Steel water tubing and connection medium grade 20 mm bore with all fitting fixed to wall, ceiling or laid in floors complete all as specified and directed.
Taking up or down 15 mm dia steel tubing and connections, complete all as specified and directed.
Taking up or down 20 mm dia steel tubing and connections, complete all as specified and directed.
M&L in repairs High dencity polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to wall,ceiling or floors etc. 40 mm bore pipe complete all as specified and directed.
S&F in repairs rotational moulded polyethylene water storage tanks of 500 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), including 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed.
S&F in repairs rotational moulded polyethylene water storage tanks of 1000 Litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed.
S&F in repairs 15 mm bore bib tap chromium plated long body fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed including CP nipple with socket complete all as specified and directed.
S & F in repair 15 mm bore stop cock / angle stop cock fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions including CP nipple and socket complete all as specified and directed.
S & F Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repairs waste fitting 32 mm bore, brass, chromium plated for basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repairs Ball valves 20 mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 20 mm - 210 gms ) complete all as specified and directed.
S & F in repairs Grating doom 100 mm dia with waste hole of PTMT. (Minimum weight 25gms) complete all as specified and directed.
S&F in repairs PVC connections 15 mm size with PTMT nuts, of length 600 mm & suitable for cold/hot water supply complete all as specified and directed.
S&F stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed
S&F stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, incl bolts and nuts and securing ends of stays to wall or roof for 75 mm bore of pipe complete all as specified and directed
S & F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F 75 mm bore PVC (SWR) bends of any radius, fixed with cement solvent, with oval access door complete all as specified and directed.
S & F 110 mm bore PVC (SWR) bends of any radius, fixed with cement solvent, with oval access door complete all as specified and directed.
S & F 75 mm bore PVC (SWR) junction single, (single T) equal or unequal, fixed with cement solvent, with oval access door complete all as specified and directed.
S & F 110 mm bore PVC (SWR) junction single, (single T) equal or unequal, fixed with cement solvent, with oval access door complete all as specified and directed.
S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating and including jointing with solvent cement complete all as specified and directed.
S&F in repairs Vitreous china european water closet pan (Pedestal pattern) white including P or S trap and connection for drain or out going pipe and flushing pipe antisyphonic pipe etc complete all as specified and directed.
S&F in repairs PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets complete all as specified and directed.
S&F in repairs swivel shower rose size 125 mm of brass chromium plated any colour (minimum weight 40 gms) for fixing with 15 mm dia steel pipe complete all as specified and directed.
S&F as in repairs vitreous china wash basin white flat back size 580 x 450 mm excluding taps waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.
S&F in repairs soap dish, with metal dish brass chromium plated fixed to plugs complete all as specified and directed.
S&F in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repairs Stainless steel kitchen rack made out of stainless steel sheet 1 mm thick with approx size 900mmx900mmx250mm best quality complete all as specified and directed.
S&F in repairs hand shower Health faucet ABS body brass chromium plated with 1.00 mtr long flexible tube & wall hook etc complete all as specified and directed.
S&F in repairs Jet spray of CP 15 mm bore fancy type with suitable flexible pipe as per site requirement including CP nipple with socket complete all as specified and directed
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.
Dismantling timber scantlings 40 Sqcm and over in section and in any position in framed work complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling of corrugated or semi corrugated Asbestos Cement (AC) sheets in roof covering complete all as specified and directed.
Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thickness including cover fillets complete all as specified and directed.
M&L Cleaning top surface of floor slab and vertical surface of wall and brushing with neat cement slurry @ 0.5 kgs of cement per Sqm with acrylic based polymer modified cementitous composite at the rate of 0.25 kg/sqm and laying 50mm thick (average) PCC of grade M-10 (Nominal Mix), mixed with WPC as per manufacturer instruction laid in slope 1:20 towards spouts including covering corners. ii) rendering15 mm thick in cement mortar (1:4) on wal/floor surfaces of sunken floor finished even and smooth with using WPC as per manufacturing instruction and brushing with neat cement slurry @ 0.25 kgs of cement per Sqm with acrylic based polymer modified cementitous composite at the rate of 0.13 kg/sqm complete all as specified and directed. iii) Applying a coat of paving bitumen 80/100 penetration @ 1.50Kg/Sq.m on plastered & concrete surfaces iv) Laying a layer of 200 micron polythene film pasted with the help of suitable adhesive complete. v) Two nos 25mm bore GI medium grade 450mm long spout shall be provided through external wall to drain out accumulated water. NOTE: Sunken floor shall be tested for water tightness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage/seepage exists.
SHANTI UDYOG (BID ID -3108235)
Jagatbandhu Enterprises (BID ID -3105357)
M/s B. K. Ghosh and Co. (BID ID -3105942)
SHRI ARUN BHATTACHERJEE (BID ID -3105891)
MS ESSCON (BID ID -3108204)
A K ENTERPRISES (BID ID -3107073)
R N De (BID ID -3107385)
M/S RANEN PAL (BID ID -3108048)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .