Addition alteration of existing office room for proposed Conference Room of DOT at 9th floor BSNL Bhawan Guwahati

Amount

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Credit for taking away unserviceable glass panels of small size / faded panels / broken pieces etc.

Credit for taking away unserviceable Paticle board panels of small size / damaged / worn out etc.

Credit for taking away unserviceable Aluminium section pieces of small length / damaged etc.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing bright finished brass handles with screws etc. complete:

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete.

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Note:- Aluminium hinges shall not be used in wooden shutters , Stainless steel hinges shall be preferred

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

1.0 mm thick.

Providing & fixing BWR Grade commercial plywood of ISI make & brand (Kitply,Greenlam, Centuryply or equivalent) of required shape & size in furniture works including cost of adhesive, rawl plugs, screws, nails etc. complete as directed by the Engineer-in-Charge.

6 mm thick

Supplying and installing unitized conference table of approved make like Godrej or equivalent and model like Mingle of Godrej or equivalent etc. Cpmplete as per the direction of the Engineer-in-Charge.

12 Seaters

Supplying Mid back revolving chair, of approved make like Godrej or equivalent and model like Oxbo of Godrej or equivalent etc. Cpmplete as per the direction of the Engineer-in-Charge.

Supplying High back revolving chair with Head rest, of approved make like Godrej or equivalent and model likePulse Aero of Godrej or equivalent etc. Cpmplete as per the direction of the Engineer-in-Charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

With stainless steel cover plate minimum 1.25 mm thickness.

Refixing aluminium partition, doors, windows and ventilators with dismantled extruded built up standerd tubular section/appropriate Z sections , with dash fasteners of required dia. & size including necessary filling up of gaps at junctions i.e top, bottom & sides with available material but providing and fixing new screws, gaskets and pivots etc. complete for housing full/Half hight cabins, cubicles and partitions including refixing of recovered floor springs and door closers for doors complete as directed by Engineer-in-charge. (Excluding the Cost of Panels fixing )

12 mm cement plaster of mix :

1:6 (1 cement: 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix :

1:6 (1 cement: 6 fine sand)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Two coats.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

Melamine polishing on wood work (one or more coat).

Attending repairs to wooden or Aluminium doors or windows by removing and attending repairs etc. Complete all as directed by the Engineer-in-charge.

Of size upto 2.50 Sqm

Attending repairs of Cuboard shutters including removing, repairing for easy and smooth operation etcand refixing, Including changing of required hinges etc. Complete all as directed by the Engineer-in-charge.

Of size upto 1.00 sqm

Providing and fixing Vertical Blinds are made up of distinct fabrics pane of good quality material and approved pattern with necessary fixtures and hangers etc. complete all as directed by the Engineer-in-charge.

Providing and fixing PVC Vinyl Wall papers of approved brand and approved pattern , fixing witout any bubbles or shrinkages using skilled professional labour and suitable adhesives as recommended by the manufature etc. complete all as directed by the Engineer-in-charge.