Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
1 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE UMROI
Military Engineer Services Garrison Engineer Umroi Umroi Military Station PO - Barapani, Shillong-793 103
REPAIR/MAINTENANCE OF PUMP MOTORS, STARTER INCLUDING REPLACEMENT OF FILTER MEDIA ALONGWITH WATER TREATMENT CHEMICALS AND ALLIED WORKS AT UMROI MIL STN UNDER GE UMROI
2026_MES_798141_1
8507/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE UMROI
AS PER NIT
8 documents required · 8 mandatory
₹500
GE UMROI
₹80,000
Yes
10 Nov 2026
10 Nov 2026
3 Dec 2026
10 Nov 2026
1 Dec 2026
24 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down the defective motor of centrifugal pump set of any make 415 volt 3 phase by dismantling the electrical connections, removing the motor from bed by decoupling from pump set at site in presence of JE E/M & Engr-in-charge, transporting to workshop, dismantling it completely, removing the burnt out winding, rewinding the same with super enameled copper wire of same gauge and with necessary insulating material, varnishing and re-assembling the motor completely with all connections and fixing to the original position and coupling with pump and necessary alignment etc and applying two coat of synthetic enamelled paint including scraping of old paint complete and written MES/SM No, testing and commissioning all as directed by Engr-in-charge.
Note: (i) A warranty of two year shall be given for satisfactory performance of motor
(ii) Alternative arrangement of motor for water supply will be arrange by the contractor if the pump is not repaired within seven days of failure of motor and the cost for the same is deemed to be inclusive in the quoted rate.
(iii) All the T&P items i.e. chain pully block & tripart shall be arranged by the contractor without claiming any extra cost.
(iv) Transportation from MES pump house to work shop shall be arranged by the contractor without claiming any extra cost
(v) Burnt out removed winding wire shall be property of contractor through schedule of credit.
(vi) Measurement will be based on Pump set rating per HP | 175 | Per HP | - | - |
| 2Servicing of centrifugal pump set by dismantling completely and replacing unserviceable ball bearing, shaft sleeve, gland neck ring gland rope, nut and bolts etc at site in presence of JE E/M/Engr in charge and re-assembling back the complete pump and fixing alignment to the original position and coupling with motor and necessary alignment etc with two coat synthetic enameled paint including scraping of old paint complete and written MES/SM No, testing and commissioning all as directed by Engr-in-charge for following pumpset:- Notes: (i) Spares shall be measured and paid separately under relavent items. (ii) A warranty of two year shall be given for satisfactory performance of motor (iii) Alternative arrangement of motor for water supply will be arrange by the contractor if the pump is not repaired within seven days of failure of motor and the cost for the same is deemed to be inclusive in the quoted rate. (iv) All the T&P items i.e. chain pully block & tripart shall be arranged by the contractor without claiming any extra cost. (v) Transportation from MES pump house to work shop shall be arranged by the contractor without claiming any extra cost. (vi) Maintenance schedule :- (a) Checking for looseness of all the foundation and coupling nuts/bolts, checking of leakage in gland packing, shifting base, bushes sluice valves, gate valves etc and rectification of the same. (b) Checking for any undue noise of motor pump and rectification of the same. (c) Checking for proper aligment and rectification of the same. (d) Checking for proper lubrication in bearing and lubricating. | |||||
| 2.01 | 75 HP pump set | 2 | Each Job | - | - |
| 2.02 | 50 HP pump set | 2 | Each Job | - | - |
| 2.03 | 40 HP pump set | 2 | Each Job | - | - |
| 2.04 | 15 HP pump set | 1 | Each Job | - | - |
| 3Supply and fix in repair of impeller with nut and bolt suitable for the following capacity of pump set complete all as directed:- | |||||
| 3.01 | 75 HP pump set | 1 | Each | - | - |
| 3.02 | 50/40 HP pump set | 3 | Each | - | - |
| 3.03 | 15 HP pump set | 1 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
BOQ_895356.xls
BOQ • 0.34 MB
8507TENDERDOCUMENTS.pdf
Tender Documents • 0.90 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .