Special repair and painting work of Government residence number PW-3 located in district Gorakhpur in FY 2025-26 LOT (1/1)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 15.56

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete With 2nd class teak wood beading 62X19 mm DSR 21.3.1

12 mm cement plaster finished with a floating coat of neat cement: 1:4 (1 cement: 3 fine sand) DSR 13.7.2

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. DSR

vetrifed tiles

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface DSR 13.80

inner wall Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, coats wherever required to including applying additional achieve even shade and colour.

outer wall paint

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges Description with necessary screws As per DSR 9.21.2

Providing & fixing of Sliding door bolts Aluminium (300x16mm) DSR 9.96.1

Providing & fixing of Tower door bolts Aluminium (150x10mm) DSR (9.97.4)

Providing & fixing of door handle Aluminium 100mm long DSR (9.100.2)

Providing and laying Integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bals 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved

Class-150(NonModular)brickworkin1:6cement and Course sand mertar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32mm dia (Flexible pipe) As per DSR No 17.28.2.1

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings as per DSR 17.25.1

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. lintermal work - Exposed on wall: As per DSR No-18.10 15 mm dia nominal bore DSR No-18.10.1

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. lintermal work - Exposed on wall: As per DSR No-18.10 20 mm dia nominal bore DSR No- 18.10.2

Providing and fixing brass bib cock of approved quality: As per DSR 18.15.1 15 mm dia nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to ISI Stands, 15 mm nominal bore DSR No. 18.51.1

Providing and fixing CP. brass long nose bib cock of approved quality conforming to 15 standards and weighing not less than 810 gms. 15 mm Nomunal Bore DSR No. 18.50.1

Providing and fixing water Closet squatting pan (Indian type) W.C. Pan size 580 x 440mm CERA with 100 mm Sad Cast Iron P or S Trop with all fittings & Fixture canplule but white vitreous china orissa patirn W.C. panof size 580 x480 mm with integral type foot rests as per DSR No. 17.1.1

Providing and fixing Towel rail of approved quality conforming to ISI Stards Required for proper completion of the work as per DSR No. 7506 PMT 600 mm 17.73.2

Cleaning and disposal of west material in shokepit including cost of all material, labour, and ist cartage up to site for proper completion of work as per direction of E-in-C