COMPREHENSIVE MAINT AND CERTAIN MISC REPAIRS/REPLACEMENT INCLUDING PERIODICAL SERVICES, REPAIRS TO JOINERY, WINDOWS, VENETIAN BLINDS, FLOORING, PLUMBING /SANITARY FITTING AND OTHER CONNECTED ITEMS AT CENTRAD UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkhat or frame (without taking off shutters from frame)of any description exc 1.5 sqm and n-exc 4 sqm each complete all as specified and directed.

Taking down chowkhat or frame (without taking off shutters from frame) of any description not exc. 1.5 sqm complete all as specified and directed.

Taking down door shutters of any description n-exc 1 sqm each complete all as specified and directed

Taking down door shutters of any description exc 1 sqm and n-exc 2 sqm each complete all as specified and directed

Dismantaling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification.

S&F Factory made solid PVC moulded door shutter with Particle Board Core, 28 to 30 mm thick (Stile), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face,fixing in frame at site complete all as specified .

S & F 35 mm thick flush shutter solid core constn with block board core and plywood face panels with decorative face veneers both faces with lipping complete all as specified and directed

S&F Powder coated aluminium window and ventilator shutter with frame, side hung type without sas bar, aluminium section weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws , anodised aluminium fitting such as peg stays 150mm long (1 No), hinges tyjpe B-21 100mm long (2 Nos) suitable handle (1 No) to each shuttercomplete all as specified.

S&F Powder coated aluminium Door shutter with frame , aluminium section weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws ,glass 5.5mm th, anodised aluminium fitting hinges tyjpe B-21 150mm long (3 Nos) handle (2 Nos), Tower bolt 250mm (02) Nos to each shutter complete all as specified.

S&F IInd class hard wood 25 mm th Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for scuring glass , etc and fitted in chowhkats complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.18mm and fixed to aluminim /wooden frame with tinned tacks, or galvanised wire staple complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed.

S&F in repair box type Cup Board made out of 18/19mm thick PVC moulded solid board, one side prelaminated, with self and shutter, full size fitted under/ above the kitchen cooking platform and other platform including provision of all fixing arrangement /fitting & fixtures (magnetic catches, piano hinges, knob, SS Screws etc) complete all as specified and as directed. (Note: For Payment purpose, only front area of cupboard shutter shall be measured).

Hacking out old broken glass (any thickness) from metal frame/aluminium frames including punching or drilling out old galzing pins complete all as specified & directed.

S & F 5.5mm thick sheet glass, ordinary quality n exc 0.5 Sqm in each pane and glazing with oil putty / rubber beading as required complete all as specified & directed.

S&F 150 mm Aluminium handles, cast type anodised complete all as specified and directed.

S&F 125 mm Aluminium handles, cast type anodised complete all as specified and directed.

S&F 125mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified.

S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified.

S&F 200mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.

S&F 150mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.

S & F in repair brass mortice lock 65 mm 4 lever vertical type with duplicate key and handle set complete all as specified. Make – Hardwyn/Godrej / Harrison)

Dismantling wall /ceiling boards,wall panelling (Fibre pulp. Insulation, AC boards,wooden boards etc) or insulation boards/slabs/composite panel, etc any thickness complete all as specifed & directed.

M&L12mm thick Gypsum board as in ceiling/lining fixed with counter sunk screws on & including GI channels frame work of standard section as per manufacturers instruction , fixed @ 1.2m in one direction and 45cm in C/C in other direction with necessary fixing arrangement at their junction point at desired heights below roof slab and including two coats of plastic emulsion paint over a coat of primer on exposed surfaces, the frame work shall be fixed with the help of GI suspenders of suitable size with the help dash fasteners and along wall, making good disturbed surfaces smoothening the gypsum board, POP lining at joints panning as required complete all as specified and as directed.

S & F in repair vertical venation blinds of special collection self adjusting system of louvers size 100 mm wide (as approved by GE) with aluminium top rail and PVC bottom, weight attached with 100 mm strip complete with chain all as specified and directed. Make : Vista /Hunter Douglas.

S & F in repair roller blinds of any size and any colour (non-blackout series) with aluminium head rail, with chain operation complete all as specified and directed . (Make: Vista/Hunter Douglas)

M&L preparation of old wooden surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed.

M&L for preparation of Old surfaces & applying one coat of French polish on wooden surface of any description, width or girth complete all as specified and as directed

M&L preparation of old Steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for Providing and applying plaster of paris putty of 1 mm thickness over old or new wall/ceiling surface to prepare the surface even and smooth complete all as specified and directed.

M&L for preparation of Old plastered wall surfaces & applying one coat of oil bound distemper complete all as specified and as directed

M&L for preparation of Old ceiling surfaces & applying one coat of oil bound distemper complete all as specified and as directed

M&L for applying One coats of dirt resistance exterior paint of required shade on existing wall including scaffolding any height etc complete all as specified and as directed.

M&L for preparation of old stone, concrete Surfaces & applying one coat of Synthetic enamel paint of any description over 10cm girth or width, not otherwise described complete all as specified and as directed.

M & L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine and applying one coat of wall care putty then scrubbing by sand paper to prepare a even surface and applying priming paint followed by applying two coats of Asian paints texture design of any shed complete all as directed.

Dismantling wrought iron or mild steel work of any desription not othewise described complete all as specified & directed

M&L for framed work such as grills grating, etc with ends of bars shouldered and /or riveted for forged into spikes framed guard bars, barred iron doors ladders framed balusters, walk ways, railings framework of water tanks and similar work conforming to Fe-290, Gde-E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces & applying two coat of Synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

Demolition of Cement Concrete of any description and in any position complete all as directed.

M&L for PCC 1:2:4 Type B1 using 20 mm graded aggregate in for coping, kneelers, apex stones, bed plates, kerbs etc including weathering, slightlty rounded or chamfered angles and throating all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed

M & L for brick work with sub-class B brick straight or curved on plan built in CM 1 : 6 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or on concrete surfaces finished fair and even without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in cement 1:4 on fair faces of brick work or on concrete surfaces finished fair and even without using extra cement complete all as specified and directed.

M&L for applying two coats of cement based paint on newly plastered surfaces including preparation of surfaces complete all as specified and as directed.

M & L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over and including a coat of primer with chalk whitening complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed.

M & L for Non-skid Coloured Ceramic tiles 7 to 8 mm thick (Square/rectangular) area of tile exc 0.11 Sqm but not exceeding 0.18 Sqm in floors, set and jointed in neat cement to match the shade laid over and including 15 mm thick screed bed in CM 1 : 6 complete all as specified and as directed.

M & L for Coloured Glazed ceramic tiles in vertifical surface 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in colour cement to match laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L Glazed Vitrified tiles light shade 8-9 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floor, aprons etc and including disposal of all debris exc 1.5 Km not exc 5 Km complete all as specified and directed.

M&L for 16-18 mm thick Granite work in platforms, partitions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & moulding the edges of granite including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for GRC (Glass reinforced concrete) rich colored tiles for path etc of size 300mmx300mm x 20mm thick set and jointed with neat cement slurry, laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including cleaning or refixing or removal to store complete all as specified and directed.

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S & F 15 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S & F 20 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S & F 25 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Dismantling of PVC pipes & fitting of any description & position up to 100 mm dia complete all as specified & directed.

S & F 110 mm thick PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 75 mm thick PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 75mm dia PVC bends for pipes complete all as specified and as directed.

S&F in repair 75mm dia CI branch pieces for CI pipes complete all as specified and as directed.

S&F in repair 100 mm dia CI bends for CI pipes complete all as specified and as directed.

S&F in repair 100 mm dia CI branch pieces for CI pipes complete all as specified and as directed.

S&F in repair 75mm dia Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F in repair white vitreous china battery based infrared senser operated urinal of approx size 710x 485x310mm having pre & post flushing with water, including fixing to walls complete all as specified & directed. Make : Jaquar Cat No URS-WHT-0704 & SNR-CHR-51097 or equivalent model of Parryware/Hindware

S&F in repair Rectangular shaped urinal partion with frosted glass size height 900mm width 450mm. Make Jaquar Cat No : IARA : 1810-US complete all as specified and directed.

S&F in repair vitreous china floor mounting WC one piece water closet as per existing trap position size approx size 790 x 350 x 630 mm of approved shape including white vitreous china cistern with dual flush fitting, of flushing capacity 4 Ltr/ 8 Ltr including seat cover & health faucet complete all as specified & directed.

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) white with ‘P’ or ‘S” trap, any pattern including Seat Cover (excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F in repair vitreous china urinals half stall type white including connection to inlet and out going pipe (waste coupling) complete fixed to walls with steel screws and PVC rawel plug and making good the surface by white cement to match the wall shade complete all as specified and directed.

S & F in repair 10 Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair Kitchen sink of size 915mm x 460mm bowl size 410mm x 330mm x 160mm.with drainage board made of stainless steel 1mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connection union & pipe complete all as specified and directed.

S&F in repair bevelled edge looking mirror 6mm thick of approved shape & size of superior quality glass mounted on wall with screws, washers complete all as specified & directed.

Dismantling water tanks exc 500 & n exc 1000 ltr capacity and removing from site complete all as specified and directed.

S&F 500 ltr Rotational moulded Polyethylene water storag tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F 1000 ltr Rotational moulded Polyethylene water storag tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F in repair Table top wash basin, white, flat back size 525x415x140mm of make -Jaquar cat part No JDS-WHM-25907N or equvalent excluding tap, chain, plug but including brackets, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin,with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified.

Fixing only in adjustment & repairs/replacement of joinery fittings, joinery items brass butt hinges, hydraulically regulated door closer, brass mortice lock, door stopper, aluminium D type handles, tower bolts, sliding door bolt, aluminium door pivots, drawer locks,wiremess, drawer channels & petty repairs like taking down & refixing, easing of doors etc complete all as specified and directed. Note :- Fittings replaced shall be measured & paid under supply only items)

Fixing only in adjustment & repairs/ replacement of sanitary fittings, plumbing items leaking to stop cock,bib cock,, pillar cock, gate valve, PVC connection, CP connection, making fully functional the leaking flushing cistern single/ double syphonic type of any description of any size and taking down carefully chromium plated bottle trap, waste coupling, PVC/GI waste pipe of size 32/40 mm dia waste water connection to WHB/Urinals, sensor taps, etc and removing all accumulated materials from the trap etc cleaning properly and refixing in the same position complete all as specified and as directed. Note for Item No 83 & 84 (i) The rates quoted in the above item includes cost of T & P & petty materials for repairs like Nails, Screws, fevicol etc complete. (ii) Adequate tradesman/supporting manpower shall be deployed by the contractor and they shall be present on all working days including saturdays and holidays from 0930 hrs to 1800 hrs for maintenance of above mentioned work. The supervisor/site engineer of the contractor will be forwarded detailed instructions by concerned AGE/JE every morning for attending complaints on daily basis. The The persons will be detailed by AGE concerned every morning for attending complaints on daily basis. (iii) The material required will be paid under seperate item in supply only. (iv) The complaints shall be attended on the day the complaint received before 1300 hrs. The complaints received after 1400 hrs will be attended on the other day before 1300 hrs. If complaints are not attended as per schedule a sum of Rs. 500/- will be penalised for each complaint for each day. (v) Any delay in non-completion of complaints will be immediately communicated to AGE/JE. (vi) complaint register & complaints slips shall be maintained by the contractor rep. After complation of cocomplaint the rep of contractor shall obtained feedback and signature of user. Payment against this lette shall be made after due verification of complaint register complaint slips by JE & Engineer-In-Charge.

Supply only brass mortice lock 65 mm 4 lever vertical type with duplicate key and handle set complete all as specified. Make – Hardwyn/Godrej / Harrison)

Supply only 125 mm brass polished butt hinges type B12 complete all as specified and directed.

Supply only door closer hydraulically regulated, design No 3 universal type suitable for door shutter 851 mm to 1000 mm in width and of weight 61 to 80 Kg each Aluminium extruded section body all as specified Make : Hardwyn/Godrej

Supply only aluminum alloy body door stopper double 150 mm size complete all as specified and directed

Supply only aluminum anodized ‘D’ type handles 125 mm complete all as specified and directed

Supply only 300 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed

Supply only 250 mm aliuminium alloy, anodised sliding door bolt with hasp staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed

Supply only Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete for glass/aluminium door as directed

Supply only 2 lever brass drawer locks size 65mm complete all as specified and as directed

Supply only drawer channel of 300mm length complete all as specified and as directed

Supply only Brass drawer handles, projection drop (50mm to 65mm) on screwed platecomplete all as specified and as directed.

Supply only 15mm bore sensotronic sensor faucet chromium plated swan neck for WHBs complete all as specified and as directed. Make – Jaquar Cat No. SNR-CHR-51011

Supply only chromium plated brass soap dish fixed to wall with brass screw complete all as directed. Make: Jaquar Cat No: ACN-1131N or equivalent model of Marc/Prayag.

Supply only health faucet with 1m long flexible tube in CP finish & wall hook for EWC complete all as specified and as directed. Make: Jaquar Cat No: ALD-573 or equivalent model of Marc/Prayag.

Supply only 32mm bore brass chromium plated bottle trap for wash hand basin, sinks, urinals, etc with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as directed.

Supply only chromium plated toilet paper holder brass fixed to wall with brass screw complete all as directed. Make: Jaquar Cat No: ACN-1153N or equivalent model of Marc/Prayag.

Supply only tubular towel rail 20 mm dia 60 cm long of brass chromium plated fixed to wall with brass screw complete all as specified and as directed. Make: Jaquar Cat No: ACN-1111NM or equivalent model of Marc/Prayag.

Supply only PEG Set 6 (Zinc) complete all as specified and directed.

Supply only 15 mm concealed stop valve chromium plated with elegant knob screwed down high pressure complete including CP cap all as specified and as directed.

Supply only 32 mm bore waste coupling brass chromium plated for VC sink, VC WHB, VC urinals, steel sinks etc with long screwed shanks and fly nuts, complete all as specified and as directed. Make: Jaquar Cat No: ALD 705 or equivalent model of Parko / Zim.

Supply only 15 mm bore CP bib cock long nose brass chromium plated with elegant knob screwed down high pressure complete including CP cap all as specified and as directed.

Supply only 600mm Long PVC connection suitable for 15mm bore pipes complete all as specified and as directed.

Supply only 15mm CP Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply only 20 mm CP Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply only 15 mm bore chromium plated fancy type brass angle valve with elegant knob screwed down high pressure screwed both ends for Iron pipe or for union complete including CP cap all as specified and directed.

Supply only 15 mm bore chromium plated fancy type brass two way angle valve with elegant knob screwed down high pressure screwed both ends for Iron pipe or for union complete including CP cap all as specified and directed.

Supply only Grating doom 100mm dia of PTMT complete all as specified and directed.

Supply only plastic water closet seat cover white, closed pattern with flat bottom and mild steel chromium plated hinging device complete all as directed and as specified.

Supply only CP Jet with 1200 mm CP PVC connection pipe for EWC complete all as specified and as directed.

Supply only CP Center Hole Basin Mixer complete all as specified and directed.

Supply only CP Wall mixer Telephonic with Crutch with Multi Flow Hand Shower ABS With 1.5 mtr SS Flexibil Tube & Hook complete all as specified and directed.

Supply only Full Glass Shelf 450 mm (with brass brackets) complete all as specified and directed,.Make : Prayag Cat No : BEA-55

Supply only 20 mm bore dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply only 25 mm bore dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply only 20mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwedfor iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

Supply only 25mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwedfor iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

Supply only Corrugated Waste Pipe 32 mm dia for WHB /Urinal complete all as specified and directed.Make : Prayag Cat No327.

Supply only Urinal Spreader of CP White colour fixing to 15 mm bore pipe complete all as specified and directed.

Supply only 6V Duracell ultra Lithium CR-P2 battery for senser based urinal/ pillar tap complete all as specified & directed

Supply only 9V Ultralife Lithium battery for senser based urinal/ pillar tap complete all as specified & directed

M&L for cleaning of manholes/Septic tanks/soakage pits/etc of any size and depth by hydraulic operated high pressure suction sewer cleaning machine having suitable tank cap incl skilled driver operator & labour and removal of sludge / silt / liquid / mud in foul position and disposing the same out side MD premises complete all as specified and directed. (Note : Maximum of 60 to 80 CUM or No of trip 20 Nos will be cleaned in a single working day by the Septic tank cleaning tanker machine. This item must be executed on each Saturday).

M&L for cleaning of chocked sewar line of dia 100 mm to 300 mm at any depth by hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of 3000 ltrs and 260 LPM with min 145 bar, suction flow of 10200 LPM incl skilled driver & operator supervising Engineer for cleaning of chocked sewer line including providing water for jetting and removal of sludge/silt/liquid / mud and sand (in foul position) etc out side the MD Premises all as specified and as directed. (Note : Maximum of 750 RM will be cleaned in a single working day by the Jetting machine, The cleaned sewage line shall be maintained and keep fully functional by removing any type of blockage, For any damage/casualty occure during working in sewer line or MH or at Other work shall be the responsibility of the contractor and the contractor shall take measures for working in sewer work and water will be provided by contractor. This item must be executed on each Saturday)

Removing spot blockage of WC / nahani trap / gully trap including disposal of material obtained from cleaning to a distance complete all as spd and directed.

Demucking old surface channels/drains of depth up to 0.45m and any section or width including removing/refixing drain cover of any shape and size and removal of sludge / silt / mud in foul position and disposing the same out side MD premises complete all as specified and directed..(Note : cost of dumucking includes for foul smell also)

S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 75 mm bore pipe, including bolts and nuts and securing ends of stays to wall complete all as specified and directed.

S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 100mm bore pipe, including bolts and nuts and securing ends of stays to wall. complete all as specified and directed.

M&L for PCC type D-2, 1:4:8, using 40mm graded crushed stone aggregate as in sub base, mass concrete all as specified.

S& F in repair 75mm thick factory made SFRC manhole/ drain covers of approved shape & size complete all as specified and as directed. Make : Polycrete or equivalent.

M & L for complete removal mud,/Cement/dust etc from old Chequered tile surface and apply two coate of Red Terracotta Paint complete all as directed. Make : Asian

S&F in repair steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staples and one shop coat of primer, erected in position incl welding as indicated complete push, pull or manual type thickness of flap 1.25mm including taking down of of rolling shutter complete all as specified and as directed .

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping the surface complete all as specified and directed.

SAGAR ENTERPRISES

Gaurav India Corporations

M/S Rohit Enterprises

LAXMI GROUP

Vishal Traders

M/S SIMRAN CONSTRUCTION CO

M/s Durga Traders

VIJAY KUMAR GUPTA

MAA SANTOSHI ENTERPRISES