Providing Ramps, Ladies Toilets Fixing of Chest at various Office Buildings under Jalore- Circle.

Earth work in excavation by mechanical means (Hydraulic Excavator)/Manual means in foundation trenches or drains (not exceeding 1.50 m in width or 10 Sqm on plan) including dressing of sides and ramming of bottoms,lift upto 1.5 mtrs including taking out the excavated soil and depositing and refilling of jhiri with waterng and ramming and disposal of surplus excavated soil as directed within a lead of 50 mtrs. All kinds of soils. (B-44/1.8)

Providing & laying in position cement concrete including curing, compaction etc .complete in specified grade excluding the cost of centering & shuttering.All work upto plinth level 1:4:8. (B-54/3.1.6)

Randam Rubble stone masonary for with hard stone in foundation & plinth in cement sand mortar 1:6 for above 30 cm thick walls. (B-69/6.1.6)

Randam Rubble stone masonary with hard stone in super structure above plinth level & upto five level for walls upto 30cm or less in thickness in cement sand mortar 1:6 (B-69/6.2.6+6.3.4)

Add exra for facing as per design & detailled specification including additional cost of stone for Course Rubble Facing Second Sort. (B-70/6.4.2)

Providing & laying in position specified grade of cement concrete for all RCC structural elements up to plinth level including curing, compaction, finishing with rendering in CM 1:3 & making good the joints & cost of plastizers (if required) excluding the cost of centering, shuttering & reinforcement. M-20 Grade. Nominal/Design Mix. (B-59/4.1)

Providing & laying in position specified grade of cement concrete for RCC structural elements up to five level including curing, compaction, finishing with rendering in CM 1:3 & making good the joints & cost of plastizers (if required) excluding the cost of centering, shuttering & reinforcement for Beams, suspended floors,roofs, landings, balconies, shelves, chhajjas, lintels, staircases etc. M-20 Grade. Nominal/Design Mix. (B-59/4.3)

Centering & Shuttering with plywood or steel sheets including strutting, propping, bracing bothways & removal of formwork for Foundation, footings, srap beams, rafts, bases of columns etc. (B-61/4.9)

Centering & Shuttering with plywood or steel sheets including strutting, propping, bracing bothways with steel props & removal of formwork up to floor five level for suspeded floors, roofs, landings, balconis, girders, cantilevers, sills, chhajjas, lintels, beams, plinth beams etc.(B-61/4.10.2)

Providing & Fabricating steel reinforcement for RCC work including straightening, cutting, bending, placing in position & binding (incl. cost of binding wire).All complete upto floor five level. Cold twisted deformed bars. (IS:1786). (B-62/4.13.1)

Supplyng & Fixing in walls machine cut & polished stone shelves, tands & sills in CM 1:3 with machine cut edges. Kota stone minimum 30 mm thick.(B-72/6.17.3)

Providing & Fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joints mitred, welded & grinded including hold fast of steel lugs 13x3mm, 15 cm. long embedded in CC blocks 15x10x10 Cm. of 1:3:6 nominal concrete & including fixing of pivoted hinges of superior quality, Window shutters made out of 50x25 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred & grinded including 10x10 mm Square bars welded to frame for paitam fixing float glass 4 mm thick panes with glazing clips & metal sash putty & fixing of shutters frame peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing & jointing with frame hinges priming coat with steel primer complte in all respect as per direction of Engineer-in-charge. Window openable. (B-102/9.28.1).

Supplying & Fixing of fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3 mm with suitable screw at not exceeding 150 mm distance.(B-102/9.26)

Pointing on stone masonary in CM 1:3. Deep groove pointing.(B-143/12.31.3)

Plaster on new surface on walls in CM 1:6 including racking of joints etc. complete fine finished. 25 mm thick. (B-139/12.3.1)

6mm cement plaster to ceiling of mix 1:3.(B-139/12.5)

P & F precast CC coping 1:2:4 mix 50mm thick complete as per specification.(B-56/3.8)

P & F pressed steel door frames confirming to IS:4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead & if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel strike-plate & shock absorber as specified & applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4 (M-15 Grade) complete as directed by Engineer-in-charge. Profile- B. (B-99/9.6.1)

P & F external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal,dehydreresin in glue both sides with approved steel fittings complete as per Annexure-'A'. 30 mm thick. Commercial Veneer both side. (B-105/8.18.2)

Kota stone slab flooring 25 mm thick over 20 mm (Av.) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing & polishing complete with base of CM 1:4. For area of each slab from 2001 to 5000 Sq.cm. (B-132/11.18.2)

Kota stone slabs 25 mm thick in risers of steps, skirting, dado & pillars laid on 12mm (Av.) thick CM 1:3 & jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing & polishing complete for area of each slab from 2001 to 5000 Sq.cm. (B-132/11.19.2)

P & F 1st quality standard white, grey, ivory, fume red brown, light green, light blue & other light shades Glaged Tiles confirming to IS: 13753 & IS: 15622 of size 300x200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of the time complete (excluding the cost of cement plaster on walls & pillar). (B-86/7.12).

P and F 1st quality MAT finished ceremic tiles size 300mm x 300mm confirming to IS:13755 & IS: 15622 colour such as white, grey, ivory, fume red brown, light green, light blue & other light shades in floors, steps, pillars etc laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed). Add extra for floor work due to extra cost of CM 1:4, 20 mm thick. (B-86/7.13)

Providing & Fixing steel gate grating & grills made of angles, tees, square bars or other flats, black pipe with holdfasts & fittings complete as per design & drawing including cutting, welding & fabrication with priming coat of red oxide. (B-99/9.8)

Polished chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing & cleaning etc. complete on 20 mm thick bed of CM 1:4. Dark shade using ordinary cement. (B-131/11.17.3+11.17.5)

Finishing wall with water proofing cement paint of approved brand & manufacture & or required shade to give an even shade including all scaffolding. New work (Two or more coats applied @ 3.84 Kg/10 Sqm). (B-145/12.41.1)

P & F Indian type White Glazed Vitreous China 1st quality W.C. Orissa Pan IS:2556 Mark) with 100 mm vitrous china P or S trap including cutting & making good the walls & floors of size 580x440 mm.(BS-217/1.2.2)

P & F Europeon type White Glazed Vitreous China 1st quality W.C. Pan IS:2556 Mark) with P or S trap including cutting & making good the walls & floors. (BS-217/1.3)

P & F Low level flushing cistern of 10 Litres capacity (IS:2556 Mark) of approved make with complete fittings C.I. brackets duly painted, Brass ball cock with ball (IS:1703 mark) complete including cutting & making good the walls. PVc with PVC bend as per IS:7231. (BS-219/1.20.2)

P & F Jet spray for water closet with C.P. Copper tube flange of approved make. (BS-226/1.59)

P & F water closet seat covers with Brass hinges complete: Solid PVC (IS:2548 marked) grade-I White for EWC. (BS-218/1.7.2)

P & F WVC Wash Basin (1st quality, IS:2556 Mark) of approved make with C.I. brackets duly painted, 1No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall of size 510x440 mm.(BS-221/1.36.2)

P & F Chlorinated Poly Vinyl Chloride (CPVC) pipes (IS:15778:2007 code) having thermal stability for hot & cold water supply including all CPVC plain & Brass threaded fittings including fixing the pipe with clamps at 1 meter spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete as per directions of Engineer In Charge. (Concealed work including cutting chases & making good the walls etc.). 15 mm Nominal size. (BS-240/2.38.1)

P & F Chlorinated Poly Vinyl Chloride (CPVC) pipes (IS:15778:2007 code) having thermal stability for hot & cold water supply including all CPVC plain & Brass threaded fittings including fixing the pipe with clamps at 1 meter spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement & the cost of cutting chases & making good the same including testing of joints complete as per directions of Engineer In Charge. (Concealed work including cutting chases & making good the walls etc.). 25 mm Nominal size. (BS-240/2.38.3)

P & F Chlorinated Poly Vinyl Chloride (CPVC) pipes (IS:15778:2007 code) having thermal stability for hot & cold water supply including all CPVC plain & Brass threaded fittings, this includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per directions of Engineer In Charge. (External work) . 15 mm Nominal size. (BS-240/2.39.1)

P & F Bib Cock (IS:8931 Mark) Superior quality of approved make C.P. Brass Bib Cock 15 mm. (B-232/2.7.3)

P & F Inlet Connection (Angle Valves) Superior quality of approved make for Wash Basin, Gyser etc. C.P. Inlet Connection 15mm Brass. (IS:8931 marked. (B-233/2.12.1)

P & F 15 mm dia. Connection pipe of approved quality/make. PVC pipe with C.P. Brass nuts up to length 450 mm. (B-233/2.13.3)

P & F Flush Cock/Flush Valve (IS:9758 Mark) for WC of approved make. Brass/ Gun metal Half-turn wt. 1 Kg. of approved quality, 25mm nominal bore. (B-233/2.14.9)

P & F Full-way (IS:778 Mark) or Wheel valve of approved make :Gun-metal 25 mm nominal bore. (B-233/2.15.3)

P & F Full-way (IS:778 Mark) or Wheel valve of approved make : Gun-metal 15 mm nominal bore. (B-233/2.15.1)

P & F PVC Storage Tank ISI Marked (IS:12701, Indicating BIS license No.) of approved make with cover, 25 mm dia. 1 M long G.I. over flow pipe & 25 cm long wash out pipe with plug & socket, including making connection etc. complete of approved design. 500 litres capacity. (B-236/2.26.3).

P & F Unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type 'B' for sciland waste discharge system (IS:13592:1992 Marked) of approved quality/make. 75 mm Dia. (B-257/3.44.1)

P & F Unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type 'B' for sciland waste discharge system (IS:13592:1992 Marked) of approved quality/make. 110 mm Dia. (B-257/3.44.2)

P & F Unplasticized Poly Vinyl Chloride (UPVC) SWR pipe fittings type 'B' for sciland waste discharge system (IS:13592:1992 Marked) of approved quality/make. Single Tee with Door, 110 mm Dia. (B-258/3.45.17(ii))

P & F Unplasticized Poly Vinyl Chloride (UPVC) SWR pipe fittings type 'B' for sciland waste discharge system (IS:13592:1992 Marked) of approved quality/make. Bend 87.5 Dg. 110 mm Dia. (B-257/3.45.4(ii))

Construction of Manhole in all type of soils inner size 90x60 cm., 300 mm thick masonary in CM 1:6, 10 cm. thick C.C. 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6 finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring, making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, Cement cover with frame of 450 mm dia. earthwork etc. complete as per design including disposal of surplus earth within 50 Mtr. lead. Depth upto 0.50 Mtr. (B-250/3.19.1)

Construction of Soakage Well in all type of soils 300 mm thick dry masonary, top & bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earthwork etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 Mtr. of size 240 cm dia. outside & 240 cm depth. (B-252/3.22.3)

Making Connection of G.I. distribution branch with main including all fitting upto 25 mm dia. (B-231/2.3.1)

P & F Looking Mirrors with PVC frame of approved make as per directions of Engineer-In-Charge. of size 500x400 mm . (B-223/1.45.1)

P & F towel rail or ringof approved quality/make. C.P. brass towel rail with bracket 600x20 mm. (B-223/1.47.4)

Construction of Cement Concrete Chamber 125 mm dia. Stainless Steel sheet grating. (B-255/3.38.4)

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of p

roduct / work refer Annexure 'A' attached with this BSR Short point (up to 3 mtr.) E-01/1.1.1

Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Medium point (up to 6 mrt.) E-01/1.1.2

Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. On board E-02/1.3.1

Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. 2x2.5 Sq mm + 1x1.5 Sq mm E-04/4.1.7

P & F 1.2 mm thick G. I. / M .S. Sheet boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) in recessed/surface as required.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. 250mm x 300mm x 75mm E-05/13/4.1.1.11

P & F of IP-65 IK08, IP-66 rated integrated SMD mid power LED bulk head type light fixture made from pressure die cast AL housing suitable with integral driver, system lumen efficiency >100 Lm/Watt output, THD<10%, PF>0.95, CRI>80, life time of minimum 50000 burning hours with 70% of initial Lumen maintened till life ends, CCt 3000K/4000K/5700K/6000K/ 6500K (AS per ANSI Bin), maximum power consumption should not be more than the specified rating & fixture shall be of BIS standard & trade mark certificate (TC). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing, surge protection 4 KV. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate/Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of product/work, refer Annexure "A" attached with this BSR. Minimum Lumen output 1000 Lm. (E-17/17.6.1).

Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . E-14/73/14.1

Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 6 A to 32 A rating E-06/17/6.1.1.2

Providing & Fixing of 240/415 V Isolator ISI marked IS:13947-III / conforming to IEC 60947-3, suitable for AC22A utilization category, 4 KV impulse withstand voltage, true contact indication, red colour dolly/lever shall have single mould covering over all poles for operation, two position din rail mounting, minimum phase termination capacity of 35 Sqmm. IP 20 contact protection & fitted in existing distribution board/sheet including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. Double Pole Isolator of 63 A rating (E-06/18/6.2.1.2)

P & F of Recessed/Surface mounting heavy duty enclosure made out from Galvanized steel/CRCA sheet not less than 1.2 mm thick confirming to IS:8623-1 & 3/IEC:61439-1 & 3. Powder painted complete with din bar making integral DB terminations with copper lugs, detachable gland plate including making connections, testing ect. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. Suiatable for 6/8 Module for MCB/RCCB. (E-06/21/6.9.2).