84768PROVN OF BITUMEN ROAD ALONGWITH COMPOUND WALL CONNECTIING MM ROAD AND RSI ROAD JUNCTION IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE.

Amount

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 mtr depth etc n exc 10 sqm on plan ffor taking out cable etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed.

Removing of excavated material (Soil) to distance not exc 50 m and deposited where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers (in soil)n.exc 25 cm complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2, (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete compelete all as specified and as directed.

M&L for RCC M-25 (Design mix) as in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

M&L for RCC M-25 (Design mix) as in columns complete all as specified and as directed.

M&L for RCC M-25 (Design mix) as in beams, copings, cantilvers, bressummers, lintels over 1.5m span and mass concrete complete all as specified and as directed.

M&L for brick work with flyash brick, stright or curved on plan exc 6m mean radious, built in cement mortar 1:6 complete all as specified and as directed.

M&L for Form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams etc flat rough finished surface of concrete complete all as specified and as directed.

M&L for Formwork to sides and soffits of lintels etc with rough finished surface of concrete complete all as specified and as directed.

Formwork to sides of pillars, posts, strutspiers, columns and stanchions, with fair finished surface complete all as specified and as directed.

M&L for TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips. complete all as specified and as directed.

M&L for TMT bars 5mm dia and over upto and incl 10 mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips. complete all as specified and as directed.

M&L for PVC pipes of 110 mm bore fixed in masonary wall as a spout complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick / block masonry / concrete surfaces in cement mortar (1:4) finished with sponge finish complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint complete all as specified and as directed.

M&L for mild steel post and strut in fencing including cutting tops to shape as directed ,drilling holes, and similar work forming to F- 290 Gde E-165 complete all as specified and as directed.

S&F Galvanized , 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts , including securing or typing at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and as directed.

M&L for 20 mm thick thermocole board fixed in expansion joint in RCC column complete all as specified and as directed.

M&L for painting or steel and iron surfaces of any description with wo coats of synthetic enamel paint on red oxide primer including preparatory work n exc 10cm in width or girth not otherwise discribed complete all as specified and as directed.

Supply only for mild steel galvanised chain link fencing of 3 mm dia GI wire, 75 mm x 75 mm mesh size and weight not less than 2.5Kg per Sqm conforming to IS: 2712, galvanised coating of type heavy as laid down in IS: 4826 including line wires fixing to any type of standards, rails, straining bolts etc. including provision of binding wire, make as approved by GE including dismantling existing chain link fencing complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L for Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for reinforced concrete pipes, class NP 3 of 600 mm dia with one collar per length of pipe complete all as specified and as directed.

S&F for Road Signed board not exc 2 Sqm each made out of 5 mm thick aluminium composit panel with retroreflective sheet 1 mm thick both sides. The letter and signed to be put over board (as directed by user) will be made out of 1 mm thick rectroreflective sheet, the signed board will be enclosed all around with 50 mm dia stainless steel pipe Grade-304 with two nos 3.0 m high stand embeded in ground upto 60 cm deep with PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) (30 cm x 30 cm x 60 cm size) complete all as specified and as directed.

K.S.JITE AND SONS

Aadarsh Construction