NIT No-3/EEMCD/2022-23 Lot-9 RETENDER

Amount

Earth work Excavation in foundation for boundry wall all type of soil including cost all material, lead, lift & labour charges etc. for proper completion of work.

Laying C.C. (1:3:6) in foundation with cement, course sand and hard stone ballast including all cost of material, labour, T&P, Taxes etc. required for proper completion of work.

Centering and shuttering work for cement concrete including all cost of material, labour, T&P, Taxes etc. required for proper completion of work.

Carriage, cutting, bending, binding & placing of steel reinforcement and binding wire including all cost of material, labour, T&P, Taxes etc. but excluding cost of binding wire, required for proper completion of work.

Laying RCC (1:1.5:3) M-20 with cement, course sand FM not less than 2.0 and hard stone grit 4.75 to 20 mm including all cost of material, labour, T&P, Taxes etc. required for proper completion of work.

Laying Brick work with (1:6) cement & course sand mortar including all cost of material, labour, T&P, Taxes etc. required for proper completion of work.

Cement Plaster (1:4) on Brick masonery including all cost of material, labour, T&P, Taxes etc. required for proper completion of work.

Fabrication of mild steel/iron work in grill, gates, railing, door and window frames including cutting, drilling, welding/revetting & hinges, where necessary and fixing in position including cost of all material, labour, T&P etc. required for proper completion of work with one coat of red oxide primer.

Finishing wall with water proofing cement paint of approved make such as super snowcem, Durroocem, roblecem, Gutta cem, Super cem quality and of required shade on new wall surface (two coats) over one coat of white cement primer to give an even shade after thoroughly brushing the surface to remove powdered materials including curing and cost of materials.

Supply and laying of 80 mm thick I shaped Mechanically compressed inter locking cement concrete pavers block manufactured by high pressure & controlled vibraion machine laving plan dimnsion 200x (160+120mm) with minimum 5 mm thick topping of D.P. cement mixed with 25% marble powder. The compressive strength of concrete paver blocks shall not be less than 30 MPa & Kg/No. including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge.

Construction of granular sub-base providing well graded material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place mathod with rotavator at OMC and comacting with smooth whell roller to achive the desired density complete as per technical specification clause 401

Painting two coat of synthetic enamel paint on new surface (excluding cost of primer) superior quality such as luxol higloss, apcolitem surperlac, Dulux, including cost of all material, labour T&P etc. required for proper completion of work.

ANKALESHWAR CONSTRUCTION COMPANY

M/S RAVI SHANKAR

M/S LALMANI MAURYA