Spl reapirs to structural member, roofing, bathroom and allied B/R Works of first floor at Emb HQ Offrs Mess and external walls of Sagarmukhi bldgs under AOR of AGE B/R (W) under GE (W) Colaba, Mumbai

Amount

Dismantling Mangalore pattern or similar tiles in roofing including portions bedded in cement mortar all as specified and directed.

Dismantling roof battens for tiles nexc 15cm shingles of any size including tilting fillets all as specified and directed.

S&F 0.56 mm plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) all as specified and directed

M&L roof tiles, Mangalore pattern, interlocking at side joints, laid dry all as specified and directed.

Fixing only in repairs roof tiles, Mangalore pattern, interlocking at side joints, laid dry all as specified and directed.

S&F in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any height all as specified and directed.

Fixing only in repairs in patches including cutting out old, piecing, heading joints 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any height all as specified and directed.

M&L in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints second class hardwood wheather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps in any situation including scafoldings of any height all as specified and directed.

Dismantling of framed work of timber in scantlings 40 sq. cm and over in section, in any position all as specified and directed.

M&L in repairs to replace old decayed timber (including piecing, scarifying, etc of old and new timber if required) second class hard wood clean sawn in scantlings timber framed and fixed in any position and description including scafoldings of any height all as specified and directed.

M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 all as specified and directed.

M&L second class hardwood clean sawn battens at 30cm centres sectional area exc 15 & n exc 25 Sqcm including scafoldings of any height all as specified and directed.

Fixing only in repair second class hardwood clean sawn battens at 30cm centres sectional area exc 15 & n exc 25 Sqcm including scafoldings of any hieght complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and directed.

S&F hot rolled medium and high tensile structural steel of grade E 250 quality A, conforming to IS 2062: 2011 as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, bent to any shape etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site out side MD land all as specified & directed.

M&L Granite (of any type and colour) 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid in floors/Jambs/WHB conters and all other similar works in approved design over 20 mm thick screed bed in cement mortar 1:4 all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the primises out side MD land all as specified and directed.

M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed.

All as per item No 19 above but in vertical surfaces

M&L for Screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes all as specified and directed.

M&L for digital coloured glazed ceramic tiles 1200x600x10 mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry & pointed in coloured cement to match the shades of the tiles laid over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed. Note:- Rate of Designer border in vertical surface will be deemed to be included into quoted rates

M&L for Non - skid light colour Ceramic tiles 7 to 8 mm thick area of each tile exc 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specified and directed.

Dismantling of ceiling board (Plup insulation or insulation etc) or insulation board any thickness including cover fillet and grid frame work all as specified and directed.

M&L Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface with GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre with & incl Hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long for any sunk or raised moulding all as specified & directed.

M&L for GI powder coated frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre all as specified and directed.

M&L for 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water all as specified and directed.

M&L 15 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface fair and even without using extra cement all as specified and directed.

M&L 15mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, (any stories of building ) including use of scaffolding all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately as supply only.

Supply only integral water proofing compound

M&L for cleaning all loose laitance on the wall and concrete substrate and applying one coat of epoxy bonding agent of SBR latex on exposed concrete surface to ensure bond between old concrete & new concrete by brush application including scafolding at any height all as specified and directed.

M&L plastering 20-25mm thick (Avg) epoxy based Polymer modified cement mortar in two coats, 15mm base coat and subsequent finishing coat with and including curing as per manufacturer's instruction all as specified and as directed by Engr-in-Charge.

M&L for filling cracks by cutting 'V' groove cracks of internal or external plaster of walls, ceilings/Chajjas all along the crack upto 10 mm and remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any height all as specifed and direcetd

M&L for removing plants including roots by dismantling of brickwork/PCC including necessary scaffolding of any type and in any position or location i.e roof, parapet walls near pipes etc and applying acid after removing roots for preventing the re-growth & making good of disturbed portion using PCC 1:2:4 type B0 & 10mm thick cement plaster in CM(1:3), size of disturbed portion not exc 150mm X150mm X 200mm all as specified and directed.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided.

Cleaning the internal surface areas thoroughly so that they are free of all contaminants like dirt and laitance & to remove all the loose materials by various mechanical means. Removal of all surface imperfections, protrusions,loose concrete & filling of cracks using SBR latex modified Mortar in the ratio Cement: Sand (1:4) and 5% by weight of cement. Applying two coats of 2 component polymer modified cementitious coating of tensile strength of 1.0 N/Sq.mm as per ASTM D 412, elongation of 120% as per ASTM D 412, crack bridging of 2mm as per ASTM C836, Shore A hardness of 60 as per ASTM D2240 & resisting 5 bars hydrostatic pressure as per DIN 1048 applied@ 2kg/sq.mtr all over the the entire horizontal and extended up to 300mm above the FFL on the vertical surface as per manufacturer's recommendation. Finally sprinkling sand over the third coat for better adhesion with plaster. The interval between each coat of coating application is 6-8 hrs. The waterproofing system should be applied directly by the manufacturer with 10 years of complete system gaurantee against leakage.

Providing and laying 120gsm Geotextile over the entire horizontal area maintaining proper overlaps. all as specified and directed.

Horizontal protection: Supplying and applying slope making protection with 40 mm avg thick M20 screed all as specified and directed.

Vertical Protection: Providing and applying 15 mm thick with CM 1:4 for wall plastering admixed with integral water proofing compound admixed @ 0.2litre/bag of cement as per manufacturer's specifications including curing.

Sealing the pipe core cuts by wrapping the pipe insert with double sided bituminuos tape and then the pipes to placed / inserted in the core cut areas & grouting the gaps around the pipe inserts with non shrink free flow grout that shall be poured into the gaps after fixing in place an effective leak- free shuttering all as specified and directed.

M&L PCC type B- 2, 1:2:4 (using 40mm graded crushed stone aggregate) 150 mm thick in floors all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on fare face of brick work or concrete surfaces, finished surfaces even and smooth without using extra cement & with using integral water proofing compound all as specified and directed.

S&F in repairs PVC Wall Lining consisting of 5mm thickt wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface all as specified and directed. Note : For new and old surface.

M&L for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint all as specified and directed

M&L for preparing surfaces of battens, any size and spacing, and treated all over with two coats of creosote (measured overall on one side only, spaces not deducted) including scafoldings of any height all as specified and directed.

M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. .

M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc primer all as specified and directed.

S&F 15 mm dia bore fancy type chromium plated long body bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule all as specified and as directed. Make: Jaguar/Kerovit

S&F chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws all as specified and directed.

S&F PVC (SWR) floor trap with grating including jointing with solvent cement, 75mm diameter of outlet all as specified and directed.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement, 75mm diameter of outlet all as specified and directed.

S&F glass shelf 600 mm (brass brackets) all as specified and directed. .

S&F Jaguar Shower Panels, Inbuilt ABS Top Shower With 60 Nozzles, ABS Body massage Jets, Chrome Plated ABS Hand shower, Brass Spout, Multi Function water Diverter, 40cm Stainless steel braided hose, brass faucet body with hot and cold mixer. Code- JPL-SSF-ST8858B3 all as specified & directed.

S&F in repairs brass chromium plated shower rose 300 mm of size with arm and with or without swivel joints to steel pipe or union all as specified and as directed.

M&L single piece WC with UF soffit closing slim seat cover, fixing accessories, accessories set and cistern fitting size 365x655x765mm and necessary fittings all as specified and directed.

S&F in repairs 20 mm dia decorative fancy type SS curtain rods and all other connected works all as specified and directed.

S&F in repairs 20 mm dia decorative fancy type SS curtain rod brackets all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 25 mm dia bore all as specified and directed

S&F GI tubing 15 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm all as specified and directed.

S&F GI tubing 20 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm all as specified and directed.

S&F GI tubing 25 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified and directed.

S&F 6 mm thick Aluminium composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour & Aluminum tubular hallow section 50 x 25 mm not exc 900 mm c/c on exceeding columns/beam/ slab to hold APC cladding all as specified and directed. Note:- Colour/ Pattern of ACP sheet shall be as approved by GE.

S&F in repairs 12mm thick, toughened glass clear or frosted for door shutters, partitions, shelves including fitting and fixtures such as glass handles SS studs, fittings for door pivots etc including sun protective film of desired pattern all as specified and directed.

S&F Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters, any decorative items for stair case and gates and similar articles all as specified and directed.

Taking down shutters of any description area exc. 1.00 Sqm but nexc 2.00 Sqm all as spcified and directed.

S&F factory made 40 mm thick flush door shutter, solid core construction with block board core and ply wood face panels, both side covered with decorative face laminated incl 1.5mm thick teakwood lipping alround with centrally locking arrangement with Lock of make Godrej of Link, 7 lever and Self closing Device all as specified and directed.

S&F powder coated/anodised aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame all as specified and directed. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clips, hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.

M&L 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square area exc 0.5 sqm in each pane frosted on one side all as specified and directed.

M&L in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding all as specified and directed.

S&F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staplee (bolt type) and fixing bolt with rolled of drawn brass bolts all as specified and directed.

S&F 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts all as specified and directed.

S&F 100 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 all as specified and directed.

M&L 150 mm long Brass handles, cast type, polished bright all as specified and directed.

M&L for french polishing on new wooden surfaces of any description, width or girth including cleaning and preparing the surfaces and a coat of wood filler with two or more coats all as specified and directed..

M&L for french polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surfaces, with two or more coats all as specified and directed..

M&L for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, treating small articles such as holdfasts, end of posts, backs of chowkhats, etc area n. exc. 0.1 sq m each and treated with tar or coal tar black paint all as specified and directed.

S&F 35 mm thick 2nd class hard wood rail and style plain framed panelled shutters (any panel) with lock rail and panel of 9 mm thick B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 100 mm X 50 mm size, applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold unserviceable fast/lugs/SS dash fasteners of required dia and length all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 62 mm x 32 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold unserviceable fast/lugs/SS dash fasteners of required dia and length all as specified and as directed.

S&F factory made 30-35 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size, modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed by Engr-in-Charge Make for Item No. 82 to 85- (a) M/S Rajshri Plastiwood, Indore (b) M/S Sintex Industries Ltd (c) M/S Accucell (d) M/S Dura Plast Extrusion

S&F in repairs 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type as in cupboard shelves and cupboard shutter fixed with screws to timber frame work with 1st class hard wood leaping all around all as specified & directed.

S&F in repairs 40 mm dia, cupboard knobs fixed with nuts screws and washers of brass, polished all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of capacity 2000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed.

S&F in repairs aluminium (extruded section) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg all as specified and directed.

S&F 18mm thick UV coating, HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over HDH board, anti fungal, moisture resistence, anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE

S&F 18mm thick UV coating, MDF board exterior grade, Both side laminated with any colour anti fungal, moisture resistence, anti borer, as per IS 14587 for kitchen/Cupboards shelfs fixing with 1st class hard wood lipping/beading all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE

S&F in repairs Partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver all as specified and directed by Engg-in-charge.

S&F in repairs stainless steel cabinet / drawers handle having a length of 250mm and shape all as specified and directed.

S&F in repairs stainless steel modular thali-plate basket SS 304, size of 520x485x200mm,heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer soft closing channel having weighing capacity of 25 kg all as specified and directed.

S&F in repairs stainless steel modular perforated cutlery basket SS 304 size of 52 x 48.5 x 10 cm with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer soft closing channel having weighing capacity of 25 kg all as specified and directed.

S&F in repairs stainless steel glass tray plate having length of 610mm, corrosion resistance telescopic drawer soft closing channel all as specified and directed.

S&F in repairs stainless steel triple cutlery inserts having length of 500mm with telescopic drawer soft closing channel having weighing capacity of 6 kg all as specified and directed.

S&F in repairs stainless steel hanging spice rack having three shelf spaces length of 500mm all as specified and directed.

S&F in repairs stainless steel grain trolley SS 304 having size 525x485x350mm, with heavy duty and grade steel with finish of zinc, corrosion resistance soft closing telescopic drawer channel having weighing capacity 25 kg all as specified and directed.

S&F in repairs stainless steel slim Ergo single square rail 550mm anthracite finish with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic soft closing drawer channel having weighing capacity 25 kg all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

M&L coloured glazed digital ceramic wall tiles 300x450x7 mm / 300 x 600 x 7mm thick in vertical surfaces such as skirting and dados, set and jointed in neat cement slurry pointed in white cement mixed with pigment to match the shade of tiles and rendering 10 mm thick in CM (1:4) on fair faces of brick work all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any height all as specified and directed.

Demolition of cement concrete (Reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specifed and as directed.

S&F glazed ceramic vitrified coloured tiles area exc 0.42 sqm but not exc 1 Sqm, 8 to 10 mm thick in verticle surfaces, set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade all as specified and directed.

M&L machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish including Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes all as specified and directed.

All as per Item No 112 above but in riser of steps, skirting, dado and pillar laid over cement screed and jointed over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.

M&L plastering 20-25 mm thick (Avg) polymer modified cement mortar in two coats, 15 mm base coat and subsequent finishing coat with and including curing as per manufacturer's instruction all as specified and directedby Engr-in-Charge. Note : - Ready to use bags will be used for the above item and no extra cost wiil be claimed by the contractor

Supply only integral waterproofing compound

M&L plastering 20-25mm thick (Avg) epoxy based Polymer modified cement mortar in two coats, 15mm base coat and subsequent finishing coat with and including curing as per manufacturer's instructions all as specified and as directed by Engr-in-Charge.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided all as specified and directed.

Cleaning the internal surface area thoroughly so that they are free of all contaminants like dirt and laitance & to remove all the loose materials by various mechanical means. Removal of all surface imperfections, protrusions, loose concrete & filling of cracks using SBR latex modified Mortar in the ratio Cement: Sand (1:4) and 5% by weight of cement and Applying two coats of 2 component polymer modified cementitious coating of tensile strength of 1.0 N/Sq.mm as per ASTM D 412,elongation of 120% as per ASTM D 412, crack bridging of 2mm as per ASTM C836, Shore A hardness of 60 as per ASTM D2240 & resisting 5 bars hydrostatic pressure as per DIN 1048 applied@ 2kg/sq.mtr all over the the entire horizontal and extended up to 300mm above the FFL on the vertical surface as per manufacturer's recommendation. Finally sprinkling sand over the third coat for better adhesion with plaster. The interval between each coat of coating application is 6-8 hrs. The waterproofing system should be applied directly by the manufacturer with 10 years of complete system gaurantee against leakage all as specified and directed.

Providing and laying 120gsm Geotextile over the entire horizontal area maintaining proper overlaps all as specified and directed.

Horizontal protection: Supplying and applying slope making protection with 40 mm avg thick M20 screed all as specified and directed.

Vertical Protection: Providing and applying 15 mm thick with CM 1:4 for wall plastering admixed with integral waterproofing compound admixed @ 0.2litre/bag of cement as per manufacturer's specifications including curing etc.

Sealing the pipe core cuts by wrapping the pipe insert with double sided bituminuos tape and then the pipes to placed / inserted in the core cut areas & grouting the gaps around the pipe inserts with non shrink free flow grout that shall be poured into the gaps after fixing in place an effective leak- free shuttering all as specified and directed..

M&L PCC type B- 2, 1:2:4 (using 40mm graded crushed stone aggregate) 150 mm thick in floors all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

Providing and injecting chemical emulsion using chloropyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment along external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc in apron all as specified and directed.

Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment for treatment of soil under existing floors using emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1cement : 2 coarse sand) to match the existing floor all as specified and directed.

Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same all as specified and directed.

S&F wall mixer 3 -in-1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flange (without hand an overhead shower) all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges all as specified and directed.

S&F chromium plated towel rings fixed with screws all as specified and directed.

S&F corner glass shelf 200 mm(brass brackets) all as specified and directed.

S&F in brass chromium plated shower rose 300 mm of size with arm and with or without swivel joints to steel pipe or union all as specified and as directed

S&F in repairs 15 mm bore chromium plated Angular stop valve with wall flange of cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality suitable for hot and cold supply all as specified and directed.

S&F wash hand basin table top of size 425x340x175 mm vitrous China including, waste coupling & PVC waste pipe of 32 mm dia all as specified and directed.

S&F Brass CP pillar cock with extension body including all necessary fittings screwed down for iron pipe for Wash Hand Basin all as specified and directed.

S&F Ciplaplast White & Ivory Large Mirror Cabinet, Size: 60x59x13 Cm with and inclduling chromim plated brass screws and PVC rawl plugs all as specified and directed.

M&L Rimless Bowl With Cistern For Extended Wall Hung WC With PP Soft Close Seat cover, Hinges, Dual Flush Cistern Fitting, Accessories Set, Size: 380x650x730 mm and necessary fittings

S&F stainless steel peg set of six suitable size of length all as specified and directed.

S&F toilet paper holder of stainless steel fixed to wall with CP brass screw all as specified and directed.

S&F chromime plated, cast copper alloy jet spray with 1 mtr pipe of SS type (for European seat) all as specified and directed.

M&L in repairs 25mm dia fancy type PVC coated on MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories all as specified and directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as specified and directed.

Demolition and breaking up drain pipes of dia 100 mm (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar all as specified and directed.

Demolition and breaking up drain pipes of dia 75 mm (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar all as specified and directed.

S&F PVC(SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips all as specified and directed.

S&F PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips all as specified and directed.

S&F PVC(SWR) bends suitable for 110 mm external dia all as specified and directed.

S&F PVC(SWR) bends suitable for 75 mm external dia all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal of 75mm dia all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal of 110 mm dia all as specified and directed.

S&F PVC (SWR) vent cowl of 110mm bore all as specified and directed.

Dismantling water tanks and removing to store all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 2000 ltr hoisted and fixed in position all as specified in SSR Part I all as directed by Engr-in-Charge.

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) area exc 1.50 but nexc. 4.00 Sqm each all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) area nexc 1.50 Sqm each all as specified and directed.

S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc. sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) all as specified and directed.

S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both sides all as specified and directed.

S&F brass 300 mm, ordinary rat tail rod pattern springs, including roler and roller plate all as specified and directed.

S&F 75 mm butt hinges medium weight cold rolled stainless steel all as specified and directed.

S&F aluminium anodised 100 mm barrel tower bolts of extruded section all as specified and directed.

S&F aluminium handle 75 mm cast type anodised all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5m in each pane all as specified and directed.

S&F 150mm long gate and shutter aluminum hook and eyes all as specified an directed.

S&F 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C'-22 all as specified and directed.

S&F structural steel work in tubular/square tube trusses including special shaped washer, gusset/bearing plate using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 all as specified and directed.

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling all as specified and directed.

M&L Point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for concealed boxes and for concealed conduit wiring with all fittings and accessories including modular cover plates as required with and fix conecaled 1.2 mm thick pressed steel modular sunken box, suitable for fixing moduler switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match with the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I for one light/fan point controlled by one modular switch, 1 way 6/10 amps, 1 module.

All as per Srl item No. 172 here in before but for one bell point controled by one bell push.

All as per Srl item No. 172 here in before but for socket outlet point 5 Amp on same board.

All as per Srl item No. 172 here in before but for socket outlet point 5 Amp on Independent board.

All as per Srl item No. 172 here in before but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) all as specified and directed.

S&F modular switch 1 way 6 A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame all as specified and directed.

S&F modular switch 1 way 16 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame all as specified and directed.

S&F modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz, AC supply, ISI Marked, with cover plate all as specified and directed.

S&F modular sockets 6A/16A, 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame all as specified and directed.

S&F in repairs Modular type AC Box, 4 Module with Socket and 25 Amp SP mini MCB in plastic box enclosure along with cover plate and top all as specified and directed.

S&F modular Fan step/ electronic regulator, 120W - 2 module A module 230/250 volt, AC supply, ISI Marked, with cover plate all as specified and directed.

S&F ceiling rose surface bakelite 65x50mm, 3 terminal all as specified and directed.

S&F call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose pre wired fixed to wall with 2 nos PVC block of suitable size all spcifided and directed.

S&F Wall bracket decorative light warm white /white type with lamp 12 Watt with necessary connection all spcifided and directed.

S&F LED Mirror Light warm white /white type with lamp 12 Watt with necessary connection all spcifided and directed.

S&F down lighter fitting warm white /white type with lamp 12 Watt with necessary connection all spcifided and directed.

S&F Exhaust fan 230 volts, 250mm, plastic body including making all electric connection all as specified and directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall all spcifided and directed.

M&L refixing of ceiling fan (old fan) and connecting up including provision of cable from ceiling rose or connector and fan Painting of ceiling fans in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust with taking down fan, sealing cable end, dismantling romoving and hanging fan and blades and removing fan and blades to store all spcifided and directed.

S&F LED security Building light LED 45 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light all spcifided and directed.

S&F in repairs MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down all as specified and directed.

S&F in repairs MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series all as specified and directed including taking down old one all spcifided and directed.

S&F in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's including taking down old one all spcifided and directed.

S&F in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link with MCCB 100 Amp 4P 10 KA all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

S&F in repairs MCCB TPN, 240 Volts, 63 to 100 Amps, 10 kA rupturing capacity 415 Volts all as specified and directed including taking down old one all spcifided and directed.

Taking Down, repair, paint and Refixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated with all accessories such as hanging clamp, nut bolt, safety valve, thermostate, NRV, PVC connection hot and cold piece all spcifided and directed.

M&L in repairs Sub main wiring with two run of 6 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 6 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires for from Pannel / Main DB to house SPN DB including taking down old Unsv submain with all associated fixtures all as specified & as directed by engr-in-charge Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 6 sqmm cable and one run of 6 sqmm cable with PVC conduite shall be measured as one length.

M&L in repairs Sub main wiring with two run of single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring all spcifided and directed. Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

M&L in repairs Sub main wiring with two run single core 1.5 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Casing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 1.5 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring all spcifided and directed. Note: (i) Two runs of 1.5 sqmm and one run of 1.5 sqmm cable and one run of PVC conduit shall be measured as one RM.

M&L earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing all as shown in Electrical Plate No 3 of SSR part -I.

S&F decorative type LED lights fitting 1x 10W, 220 V, LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size completeV, AC decorative box type, bright white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose pre wired fixed to wall with 2 nos PVC block of suitable size all spcifided and directed.

S&F LED 18 Watt 3000 K/6500K, Slim raccess mounted LED panel with premium diffuser to ensure glare free & even light distribution in LIFT Corridor area, with integrated electronic driver of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated with all accessories such as safety valve, thermo state, NRV, connection piece all as specified and directed.

S&F in repairs decorative bed light fitting with goose neck LED light, working on 240 volts, 50 hz, fittings comprising with stainless steel finish fixture including with opal glass diffuser and with LED bulb of capacity 7 WATT all as specified and directed.

S&F in repairs decorative wall mounting fitting 2 light opal frosted glass, working on 240 volts, 50 hz, fittings comprising with stainless steel finish fixture including with opal glass diffuser and with LED bulb of capacity 7 WATT all as specified and directed.

M&L in repairs Sub main wiring with four run FRLSH of 10 sq mm stranded copper conductor PVC unsheathed FRLSH wire along with 10 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires for from Panel / Main DB to house TPN/SPN DB including taking down old Unsv submain with all associated fixtures all as specified & as directed by engr-in-charge. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement four runs of 10 sqmm cable and one run of 10 sqmm cable with PVC conduite shall be measured as one length.

SAHI SAGAR ENTERPRISES (BID ID -3241727)

Unitech Enterprises (BID ID -3241031)

N F ENTERPRISES (BID ID -3243535)

Shivam Enterprises (BID ID -3243715)

SAHU AND SAHU CO. (BID ID -3243463)

Bright Construction Co (BID ID -3243680)

GANGAJAL (BID ID -3242311)

Bidder Name

Unitech Enterprises

Frends Enterprises

SAHU AND SAHU CO.

Bright Construction Co

GANGAJAL

Shivam Enterprises

SAHI SAGAR ENTERPRISES

N F ENTERPRISES