PROVN OF HARDSTANDING NEAR BLDG NO 213 AT 11 GRRC SPL REPAIR/ REPLACEMENT OF CEILING FAN (492 Nos) AGAINST EXISTING DEFICIENCY OF BER ITEMS AND PROVN OF MS GATE PATH AND ALLIED WORK NEAR BLDG NO P-51 (SURYA AUDITORIUM) UNDER GE (WEST) LUCKNOW

Amount

Excavation in trenches n exc 1.5 m wide and not exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and as directed.

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L cement concrete 1:4:8 type D-2 using 40 mm graded stone agg in foundation, filling and mass concrete complete all as specified and as directed.

M&L brick work with fly ash brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in benching, coping, kerbs etc including necessary frame work complete all as specified and as directed.

M & L for rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surface and finishing the surface even and fair complete all as specified and as directed.

Demolition of cement concrete tiles coloured glossy finish rubber moulding with mixture of white cement and pigments of size 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry in floors incl 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for chequered cement concrete tiles coloured glossy finish rubber moulding with mixture of white cement and pigments of size 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry in floors incl 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L for 75 mm thick PCC 1:4:8, type D2( using 40mm graded stone aggrtegate) as in sub base etc complete all as specified and as directed.

M&L for Sand cushioning under floors or in foundations or in trenches for laying of cables in duct/ trench or under interlocking paver block including watering and consolidation complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking pavor block of 80 mm thick (M-40 Grade) of any shape and size confirming to IS-15658-2006 as in hard standing with grey cement and pigment complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm), including necessary excavation making drainage opening wherever required complete all as specified and as directed

M&L for preparation of new surface of concrete/kerb stone surfaces, facias, cornices etc by removing all scale, loose material dust etc and applying two coats of weather proof anti fungal paint over one coat of wall care putty and applied as per manufacturers instruction complete all as specified and as directed

Supply and fixing of ceiling fan 1200 mm sweep, BEE star rated (40-50 Watt), with min service value 4.5, Min air delivery 210 CMM, copper wound motor, AC single phase, 230/240 volt, white colour complete with aluminium blades, down rod 300mm long, canopy and provn of connection with 3 core flexible copper chord of size 1.5 sqmm from ceiling rose to fan complete all as specified and as directed. Note: Old ceiling fan shall be deposited in AGE E/M store yard.

Supply and fixing of ceiling fan 1400 mm sweep, BEE star rated (50-60 Watt), with min service value 4.1, Min air delivery 245 CMM, copper wound motor, AC single phase, 230/240 volt, white colour complete with aluminium blades, down rod 300mm long, canopy and provn of connection with 3 core flexible copper chord of size 1.5 sqmm from ceiling rose to fan complete all as specified and as directed. Note: Old ceiling fan shall be deposited in AGE E/M store yard.

Supply & Fixing of stationery storage type electric BEE five star rated Hot Water Geyser of capacity 25 Ltr to operate on 230 volt AC supply,vertical type, white in colour, working pressure min 08 Mpa with glass lined coated tank, magnesium anode, adjustable thermostat, enamel coated incology heating element 2 KW, ABS plastic body, Product warranty-2 years, Heating element warranty -4 years, Inner Tank warranty -7 years, including 2/4 Nos full threaded fastener of size 100 x 10mm with nuts and 2 Nos washer complete all as specified and as directed.

S & F sheet metal enclsoure with MCB 20 Amp and metallic socket and top factory made complete all as specified and as directed

M & L for sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 2.5 sqmm nominal cross sectional area and one run of 2.5 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and as directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F MCB SP 6 to 32 Amps 240 volts 10 KA breaking capacity on existing DB complete all as specified and as directed.

S & F 600 mm long steel connection pipe hot series with both side nut with rubber washer suitable for 25 Ltr geysers complete all as specified and as directed

Supply and fix stop valve, 15 mm bore chromium plated, cast copper alloy, screwed down, high pressure, Fancy type, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

S&F GI tubing size 15 mm bore medium grade with screwed socket joint with all fittings such as bend , elbow, Tee, short nipple, diminishing pieces , caps, plucks and unions e.t.c and fixing complete with clips , wall hooks, wooden plucks and making good the disturbed surface match with the existing surface complete all as specified and as directed.

S&F bib tap 15 mm bore, ISI MARK, cast copper alloy, chromium plated fancy type handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminum conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 35 Sq mm 3.5 core stranded conductor nominal cross section complete all as specified and as directed

Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminum condector served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 50 Sq mm 3.5 core stranded condector nominal cross section complete all as specified and as directed

Taking out old Earthig & Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire 4 sqmm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance of not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on complete all as specified and as directed

Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and as directed

Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and as directed

M & L brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and as directed.

Taking down old DB and Supply & Fix of sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volt, 04 way with 200 Amp rated copper bus bar with double door, IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and as directed.

S&F in replacement of sheet metal enclosure (MCB DB) single phase and neutral with 200 Amps rated bus bar 12 way double door type , 240 volts complete all as specified and as directed

S&F in replacement of sheet metal enclosure (MCB DB) single phase and neutral with 200 Amps rated bus bar 8 way double door type , 240 volts complete all as specified and as directed

Supply and fix in replacement of MCB SP 230V, B curve 6-32 Amps capacity complete all as specified and as directed

Ditto as item No 32 herein before but SPN 40 to 63 AMP 'C' curve, 240 volts, single pole & neutral complete all as specified and as directed

S&F modular type sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed

Taking down U/S MCCB's and Supply & Fix MCCB four pole 415 volts 100 Amps rupturing capacity 16 KA complete all as specified and as directed

Taking down U/S MCCB's and Supply & Fix MCCB four pole 415 volts 63 Amps rupturing capacity 16 KA complete all as specified and as directed

Taking down old rusted Pipe and Supply & fix GI pipe light grade 40mm dia in trench/ wall for protection of Cable and earth lead including plaster match surface of wall complete all as specified and as directed

S & F Offload change over switch, 200 Amps, 415 volts, 4 pole in sheet metal enclosure conforming to IS:13947 (Part-3); IEC:60947-3 with locking facility including all connecting/ jointing materials and dismantling of existing change over switch, complete all as specified and as directed

M&L for Sub main wiring with two single core PVC insulated cable with 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling including dismantling of old sub main wiring complete all as specified and as directed. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

M&L for Sub main wiring with two single core PVC insulated cable with 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling including dismantling of old sub main wiring complete all as specified and as directed (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)

M&L for providing cement concrete design mix M-25 (using 20mm graded stone agg) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter of rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for providing cement concrete design mix M-25 (using 20mm graded stone agg) as in Columns, pillars, piers,posts and struts rough finished surfaces of concrete flat complete all as specified and as directed.

Formwork to sides of pillar column square /rectangular or polygonal of rough finished surface of concrete complete all as specified and as directed.

M&L for MS Bar 10mm dia over TMT bar cut to length bent to shape required including cranking , bending binding spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, Bar complete all as specified and as directed.

M&L for mild steel bars 5mm dia and over upto 10mm dia TMT Bars in stirrups and binders etc including cutting, binding bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to complete all as specified and as directed.

Earth filling under floor including spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required complete all as specified and as directed. (Note Material obtains from item No-01 shall be reused)

M&L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.incl rendering 10mm thick on fair faces of concrete surfaces finished surface even and rough to receive the stone in CM 1:4 complete all as specified and as directed.

M&L for providing edge moulding to marble stone any description 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F for framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S&F 200 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed.

M&L 3 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer of surfaces exc 10cm width or girth complete all as specified and as directed.

Ditto- as item 54 above but brackets or cantilevers n. exc 30cm projection, pintle hinges, gratings, frames and similar articles when unconnected with other painting complete all as specified and as directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in 1:4 complete all as specified and as directed.

M&L for hardcore of broken stone boulders guage exc 63mm but n exc. 100 mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 type D2(40mm graded stone aggregate) as in sub base foundations filling and mass concrete complete all as specified and as directed.

M&L Cement concrete type B-0,1:2:4 (12.50 mm graded stone aggregate) as in coping and kerbs or mud stops,rounded or chamfered on edges complete all as specified and as directed.

abhinish traders

M/S Reliance Construction

M/S KAUSHIK CONSTRUCTION

Spectrum Enterprises

M/S S S A ASSOCIATES

QUALITY CONSTRUCTIONS CO

ANIL CONSTRUCTION

EVEREST CONSTRUCTION