Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.3 LAccepted-AOC 290 NEW PLOT JAWAHAR NAGAR JAMMU JAMMU JAMMU KASHMIR 180005 | JAMMU | JAMMU AND KASHMIR | 180005 | L1 | Accepted-AOC L1 | |
| 2 | L2₹50.0 L+₹5.0 L (11.0%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹50.0 L+₹5.0 L (11.1%)Rejected-Finance 10 11 PANDRI GOVIND NAGAR RAIPUR CHATTISHGARH 492001 | RAIPUR | CHHATTISGARH | 492001 | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹50.4 L+₹5.4 L (12.0%)Rejected-Finance NEAR SATSANG GARACHARMA BASTI GARACHARMA PORT BLAIR 744 105 | PORT BLAIR | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744105 | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹50.7 L+₹5.7 L (12.8%)Rejected-Finance | L5 | Rejected-Finance Not Being L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
15 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Minniebay
GE Minniebay Juglighat Post Minniebay Port Blair 744103
DAY TO DAY MAINTENANCE AND CERTAIN B/R REPAIR WORKS AT INS UTKROSH UNDER AGE B/R II AT GE MINNIEBAY,PORT BLAIR
2023_MES_598404_1
8254/E8
Open Tender
Civil Works
Item Rate
270 days
Minniebay Port Blair
As per tender documents
10 documents required · 10 mandatory
₹500
GE Minniebay
₹90,000
Yes
30 Jun 2023
25 May 2023
17 Jun 2023
26 May 2023
15 Jun 2023
9 Jun 2023
Amount
Taking up or down old/chocked water tubings 15mm bore with fittings from trenches /walls complete all as specified and as directed by Engineer in Charge.
Taking up or down old/chocked water tubings 20mm bore with fittings from trenches /walls complete all as specified and as directed by Engineer in Charge.
Taking up or down old/chocked water tubings 25mm or 32mm bore with fittings from trenches /walls complete all as specified and as directed by Engineer in Charge.
S&F 15mm outer dia CPVC pipes of pressure rating 10kgf/cm2 in walls ,ceilings or in floors etc complete all as specified and as directed by Engineer in Charge.
All as per item No 04.00 above but 20 mm outer dia complete all as specified and as directed by Engineer in Charge.
All as per item No 04.00 above but 25 mm outer dia complete all as specified and as directed by Engineer in Charge.
All as per item no 04.00 above but 32 mm outer dia complete all as specified and as directed by Engineer in Charge.
Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not exe 10 cm girth complete all as specified and as directed by Engineer in Charge.
Disconnecting GI tubings of water tanks, taking out old rusted GI tube short lengths (nipples) embedded in RCC tank walls as out lets/inlets by chiselling and replacing with new nipples, making good with cement concrete 1:2:4 (using 20mm graded stone aggregate) and refixing of tubing complete all as specified and as directed by Engineer in Charge. Note: Cost of new nipple / long screw shall be included in the quoted rate
S&F in repairs 32mm waste fittings, brass, chromium plated for glazed ware sinks and basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end complete all as specified and as directed by Engineer in Charge.
S&F in repairs 40mm waste fittings, brass, chromium plated for glazed ware sinks and basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end complete all as specified and as directed by Engineer in Charge.
S&F in repairs 15mm bore bib tap cast copper alloy chromium plated (normal type) complete all as specified and as directed by Engineer in Charge.
Fixing only in repairs bib cock of any dia and type including cleaning, removing of air block etc complete all as specified and as directed by Engineer in Charge.
S&F in repairs vitreous china wash basin, white flat back of size 550mm x400mm, excluding tap including bracket complete all as specified and as directed by Engineer in Charge.
S&F in repairs 15mm bore bib tap cast copper alloy chromium plated (fancy type) screwed down for iron pipe complete all as specified and as directed by Engineer in Charge.
S&F in repairs vitreous china wash basin, white flat back of size 610x480x195mm with half pedestal excluding pillar tap, and waste fittings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, complete all as specified and as directed by Engineer in Charge.
S&F in repairs 25mm bore ball brass valve high pressure of polethene float and fly nut complete screwed for iron pipe and fixed, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer in Charge.
All as per item No 17.00 above, but 20mm bore complete all as specified and as directed by Engineer in Charge.
S&F in repairs 15 / 20 mm bore angluar stop cock cast copper alloy (Conventional type) screwed down high pressure with crutch or butterfly handle screwed ends complete all as specified and as directed by Engineer in Charge.
S&F in repairs 15 / 20 mm bore angular stop cock cast copper alloy (Fancy type) screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and as directed by Engineer in Charge.
S&F in repairs 15mm bore stop valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends including necessary cutting and making good surface of wall or floor to match with the existing tile surface complete all as specified and as directed by Engineer in Charge. Note : Cost of tiles shall be included in the qouted rate
Fixing only in repairs stop cock (any fancy type) and size after cleaning and removing of blockage complete all as specified and as directed by Engineer in Charge.
Fixing only in repairs stop cock (Fancy type) and size after cleaning and removing of blockage complete all as specified and as directed by Engineer in Charge.
S&F in repairs vitreous china squatting pan (IWC) of pattern long pan of size 580mm x 440mm, white with P or S trap, front or back inlet and foot rest complete including provision of Plain Cement Concrete (1:5:10) Nominal mix using 12.5mm stone aggregate bedding complete all as specified and as directed by Engineer in Charge.
Fixing only in repairs by replacing minor parts like flushing knob, float, screws etc of PVC flush tank low level cistern, 10 ltr capacity, including connecting to existing water supply line and water closet pan complete all as specified and as directed by Engineer in Charge. Note : Cost of minor parts shall be included in the qouted rate
S&F in repairs gun metal gate valves with iron wheel head screwed both ends for iron pipe of dia 20mm complete all as specified and as directed by Engineer in Charge.
S&F in repairs gun metal gate valves with iron wheel head screwed both ends for iron pipe of dia 25mm complete all as specified and as directed by Engineer in Charge.
S&F PVC flexible connection of 15mm dia, 450mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flush tank etc complete all as specified and as directed by Engineer in Charge.
S&F in repairs towel holder twin type CP Brass complete all as specified and as directed by Engineer in Charge.
S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long body with swivel joint including fixing to steel pipe or union,complete all as specified and as directed by Engineer in Charge.
Demolition of tiles of any description or thickness in floor, hearth or wall including cement mortar bedding, removing debries complete all as specified and as directed by Engineer in Charge.
M&L for non-skid ceramic coloured tiles 7 to 8mm thick(square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm in floors etc set and jointed in cement slurry and pointed in coloured cement to match over a screed bed of 15mm thick in CM 1:6 complete all as specified and as directed by Engineer in Charge.
M&L for non skid cermic coloured tiles (400 x 400) mm, 7 to 8mm thick ( square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over a screed bed of 15mm thick in CM 1:6 complete all as specified and as directed by Engineer in Charge.
All as per item No 33 but on vertical surfaces such as skirtings, dados and risers to steps complete all as specified and as directed by Engineer in Charge.
M&L for 20 mm thick granite (of any type ) work (table rubbed mirror polished) edges rounded chamfered and bull nosed in steps, joints, cills, cooking platform & likes over including screed bed of 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes, incl pointing in white cement with admixture of pigment to match with shade of granite stone including grinding and polishing complete all as specified and as directed by Engineer in Charge.
M&L for coloured Glazed ceramic tiles in vertical surfaces 350X250X7mm / 450X350X 7mm thick as in skirting /dado, set and jointed in cement slurry and pointed in coloured cement to match laid over 10mm thick cement backing coat in CM 1:3 complete all as specified and as directed by Engineer in Charge.
M & L for coloured chequered cement concrete tiles 300 x 300 x 25 mm thick, set and jointed neat cement slurry and pointed with coloured or grey cement match with pigment, over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 etc. complete all as specified and as directed by Engineer in Charge.
M&L for coloured heavy duty vertified coloured tiles 300X300X10 mm thick of each tiles in floor/ steps/stairs etc set and jointed with neat cement slurry and pointed with cloured cement to match over a screed bed of 15mm thick in CM 1:6 complete all as specified and as directed by Engineer in Charge.
M & L for figured glass 5 mm, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed by Engineer in Charge.
S&F in repairs PVC flush tank low level cistern, 10 liter capacity, including connecting to existing water supply line and water closet pan complete all as specified and as directed by Engineer in Charge.
S&F in repair 100 mm dia Chromium Plated grating including joints with solvent cement complete all as specified and as directed by Engineer in Charge.
S&F in repairs vitreous china wash down water closet pan pedastal pattern (EWC) white in colour with and including plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device including connection to outgoing pipe and flushing pipe complete all as specified and as directed by Engineer in Charge.
S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed by Engr-in-Charge.
S&F in repairs vitreous china wash down water closet pan pedastel pattern of size 770x380x660 (EWC) (couple closet) white in colour with and including Soft close Seat cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified and as directed by Engineer in Charge.
Fixing only in repairs concealed stop cock of any type and size after cleaning and removing of washer of blockage complete all as specified and as directed by Engineer in Charge.
S&F in repairs stainless steel sink with drainage board made out of 1.00 mm thick sheet with plug, washers, Ms angle cantilever brackets for suitable size and connecting union to pipe of overall size of 1140 mm x 500 mm and bowl size 510mm x 400 mm x 190 mm complete all as specified and as directed by Engineer in Charge.
S&F in repairs PVC seat cover white closed pattern for EWC complete all as specified and as directed by Engineer in Charge.
S&F in repairs tubular towel rail of 20mm dia of 60cm in length, D shaped bracket brass chromium plated including brackets complete all as specified and as directed by Engineer in Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer in Charge.
S&F Mild steel framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer in Charge.
S& F Mild steel work in tubular trusses including special shaped washers etc complete to IS 1161-1979 grade St-240 complete all as specified and as directed by Engineer in Charge.
S&F in repair Corner glass shelf high quality of 5mm thick glass & CP railing with bracket complete all as specified and as directed by Engineer in Charge.
S&F in repairs high quality CP Towel Ring square with round flange fancy type complete all as specified and as directed by Engineer in Charge.
S&F in repairs, 15mm CP two way Bib Cock heavy duty including screwing down for iron pipe complete all as specified and as directed by Engineer in Charge.
Taking down existing chowkats or frames n.exc. 1.5 Sqm each removing to from store or handed over to contractor complete all as specified and as directed by Engineer in Charge.
Taking down existing chowkats exc. 1.5 Sqm and n.exc. 4 Sqm each without taking off shutter from the frame complete all as specified and as directed by Engineer in Charge.
Taking down shutters resecuring and easing of any description exc. 1 Sqm and n.exc. 2.00 Sqm each and refixing the same opening complete all as specified and as directed by Engineer in Charge.
S&F Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer in Charge.
S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and as directed by Engineer in Charge.
S&F plain, solid, straight chowkats and frames of 2nd class hard wood, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engineer in Charge.
S&F Factory made glazed and skelton shutters 30mm thick of 2nd class hard wood open rebated and prepared to receive glass, gauge etc. edges of framing plain chamfered or rounded fitted without and mitred beads for securing glass etc., divided into squares sizes of members of shutters as specified in SSR Part-I, section 8 Clause 8.20 (a) with sash bars any numbers complete all as specified and as directed by Engineer in Charge.
S&F Factory made 35 mm thick, 2nd class hardwood plain, framed, panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part – I), Klin seasoned and chemically pressure treated complete all as specified and as directed.
M& L for Plain cement concrete type C-1,Nominal mix 1:3:6 using 20mm graded stone aggregate as in filling under hold fast as directed including necessary form work, complete all as specified and as directed by Engineer in Charge.
M& L for treating with tar or coal tar black paint on back of chowkats, area tarred exec 0.1 Sqm but not exceeding 0.5 Sqm each treated with tar or coal for black paint complete all as specified and as directed by Engineer in Charge.
M& L for treating small articles such as stop, covers, gully grating, hold fasts, and of posts , back of chowkats, etc area not exc 0.1 Sqm each treated with tar or coal tar black paint complete all as specified and as directed by Engineer in Charge.
S&F Mild steel barrel tower bolts 100 mm size stove enamelled black, with bright bolt and fixed complete all as specified and as directed by Engineer in Charge.
S&F Mild steel barrel tower bolts 300 mm size stove enamelled black, with bright bolt and fixed complete all as specified and as directed by Engineer in Charge.
S& F Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) 300 mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer in Charge.
S & F 75 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed by Engineer in Charge.
S & F 100 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed by Engineer in Charge.
S&F bands, straps , supports or stays for rain water, ventilating pipes including bolts, clamps, hold fasts etc and similar small articles to Fe-410- O or Fe-310- O complete all as specified and as directed by Engineer in Charge.
Taking down aluminium window / ventilator shutters of any size from the existing aluminium window / ventilators, adjusting the aluminium section members, oiling /greasing for easy functioning of windows and refixing the shutters including taking down MS grill and refixing in the existing frame complete all as specified and as directed by Engineer in Charge.
S&F Anodised Aluminium frames for Partition, Door, Windows ,sliding shutters and Ventilators with one or more rebates incl jointing cleat for fixing etc and aluminium anodised skelton windows & ventilator shutter fixed with glass or gauge, side hung type without sash bars using standard aluminium section incl necessary Aluminium grill, jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc complete all as specified incl aluminium grills fixed to window frame aluminium anodised wire cloth fixed to aluminium frame complete all as specified and as directed by Engineer in Charge. NOTE: (i) Payment under this item will be make only for the cost of aluminium section. However unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of 5mm thick glass etc. (ii) Supply only 5mm thick sheet glass and aluminium wire cloth be measured and paid separately. (iii) Weight of aluminium handle & SS hinges shall not be accounted for payment purpose .
Supply only 4.80mm thick plain sheet glass complete all as specified and as directed by Engineer in Charge.
Supply only Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staplesfor mosquito proofing complete all as specified and as directed by Engineer in Charge.
Supply & fix in repairs Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples for mosquito proofing complete complete all as specified and as directed by Engineer in Charge.
S & F in repair False for seamless Ceiling Frame Work using GI perimeter channels of 0.55 mm thick, having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the ceiling, fixed to wall with nylon sleeves and screws at 610 mm intervals, GI intermediate channels of size 45 mm X 15 mm X 0.90 mm supported with GI ceiling angles of size 25 mm X 10 mm X 0.55 mm fixed to soffits with steel expansion fasteners / GI cleats at 1220 mm intervals, ceiling section of 0.55 mm thick having knurled web of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to intermidiate channel with connecting clips and in direction perpendicular to the intermidiate channels at 457 mm centre to centre including fixing 6mm thick Asbestos cement building boards fixed to ceiling frame work with suitable hanger of mild steel wires at regular interval complete all as specified and as directed by Engineer in Charge. Note : Rate included for necessary scaffolding to providing ceiling complete
S & F in repair anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc complete all as specified and as directed by Engineer in Charge.
S&F in repairs 25mm dia stainless steel powder coated curtain rails with fixing brackets in both ends complete all as specified and as directed by Engineer in Charge.
S&F in repair decorative globes for curtain rails to be fixed at both end complete all as specified and as directed by Engineer in Charge.
S&F in repair stainless steel tubing of any diameter or square or rectangular in shape, thickness of wall not more than 16 gauge of grade AISI-316 type Aesthetic anticorrosive in nature as in framed work / Posts / fencing work / railings / grills / designer work,purposily made doom and base welded with tubing where required including cutting, bending, welding, grinding, buffing and bright polishing the welded joints and adjacent areas and fixing in any type of location complete all as specified and as directed by Engineer in Charge.
M&L for welding in repairs n. exc 2.5 cm in length (not exc 6mm thick) complete all as specified and as directed by Engineer in Charge.
Excavating in post holes in hard/dense soil n.exc. 0.5 cum and getting out returning, filling in and ramming in layers n.exc. 25 cm, watering and removing surplus soil to a distance n.exc. 50 mtr and making good the surfac complete all as specified and as directed by Engineer in Charge.
M&L Plain Cement Concrete 1:2:4 type B1 Nominal mix (using 20mm graded stone aggregate) as in foundation, filling & mass concrete for foundation of fencing posts complete all as specified and as directed by Engineer in Charge.
Demolition and breaking out drain pipes of any dia including necessary bend ,tees and other accssories etc complete all as specified and as directed by Engineer in Charge.
S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incuding necessary clamps etc to fixing on walls complete all as specified and as directed by Engineer in Charge.
S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors incuding necessary clamps etc complete all as specified and as directed by Engineer in Charge.
S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors incuding necessary clamps etc to fixing on walls complete all as specified and as directed by Engineer in Charge.
S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints incuding necessary clamps etc to fixing on walls complete all as specified and as directed by Engineer in Charge.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed by Engineer in Charge.
S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed by Engineer in Charge.
S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed by Engineer in Charge.
S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed by Engineer in Charge.
S & F 110 mm bore PVC (SWR) bends with access door complete all as specified and as directed by Engineer in Charge.
S & F 110 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed by Engineer in Charge.
S & F 75 mm bore PVC (SWR) branch piece,double(double Y) equal or unequal complete all as specified and as directed by Engineer in Charge.
S&F PVC (SWR) reducers one end 110mm another end reduced 75mm complete all as specified and as directed by Engineer in Charge.
S&F PVC in repairs (SWR) floor trap diameter of out let 75mm ,plain with grating including jointing with solvent cement fixed in cement concrete complete all as specified and as directed by Engineer in Charge. Note : Cement concrete shall be measured and paid seperately.
Demolition of precast concrete block walling built in cement mortar complete all as specified and as directed by Engineer in Charge.
M&L for PCC solid block masonry (1:3:6) (using 20mm graded stone aggregate) straight or curved on plan exc 6m mean radius, exc 10cm in width and built in CM (1:6) all as specified.
M&L for preparation of old distempered surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed by Engineer in Charge.
M&L for preparation of old distempered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and as directed by Engineer in Charge.
M&L for preparation of old sufaces and applying one coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion complete complete all as specified and as directed by Engineer in Charge.
M&L for preparation of old surfaces of wall and applying one coat of cement base paint complete all as specified and as directed by Engineer in Charge.
M&L for preparation of old wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and as directed by Engineer in Charge.
M&L for preparation of steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer in Charge.
M&L for preparation of New or previsouly un treated steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat aluminium red oxide paint complete all as specified and as directed by Engineer in Charge.
M&L for applying one coat of indigo floor paint on paver block / chequered tiles including preparation complete all as specified and as directed by Engineer in Charge.
Taking down cement plaster on brick or PCC block masonry wall in any description complete all as specified and as directed by Engineer in Charge.
M&L for rendering 15mm thick in two layers of first layer 10mm thick in CM (1:6) and second layer 5mm thick rendering in CM (1:4) using water proofing compound (WPC will be paid separatley) on brick masonry or stone block masonry or concrete surfaces complete all as specified and as directed by Engineer in Charge.
Supply only water proofing compound conforming to IS-2645 1975.
M&L rendering 10mm thick in CM (1:6) on internal surfaces of walls of block masonry finished even & smooth without using extra cement complete all as specified and as directed by Engineer in Charge.
M&L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and as directed by Engineer in Charge.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer in Charge.
M&L preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer in Charge.
M&L for preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer in Charge.
M&L for applying a layer of wall care putty on wall and making surface even and smooth complete all as specified and as directed by Engineer in Charge.
Making arrangements for scaffolding in shafts/spot/locationof weed growth,spraying anti weed solution of Herabicide Glyphosate 41% orequivalent onplant /weed leaves without cutting/disturbing the plants on sunny weather and allow the plant /weed to dry for a period of 30 days and removing the weed incuding its root ,making good with CM 1:3 or with PCC 1:2:4(12.5mm graded aggregates)including 02 coats if acrylic paint complete all as specified and as directed by Engineer in Charge.
M&L for filling cracks in wall, columns, beams etc by removing existing plaster and cutting grooves n.exc. 25cm girth and 25mm in depth cleaning and applying crack seal finished smooth and applying two coats of oil bound distemper complete all as specified and as directed by Engineer in Charge.
S & F in repairs Stainless Steel plate rack of size 910 mm X 960 mm of super deluxe model, suitable for 12 plates made with 22 gauge sheet and weight not less than 5.5 Kg, complete all as specified and as directed by Engineer in Charge.
S&F in repair for 1000 Litres rotational moulded polyethylene water storage tank double layered ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including tank cover and dismantling complete all as specified and as directed by Engineer in Charge.
S&F in repair for 500 Litres rotational moulded polyethylene water storage tank double layered ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including tank cover and dismantling complete all as specified and as directed by Engineer in Charge.
S&F in repair for 750 Litres rotational moulded polyethylene water storage tank double layered ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including tank cover and dismantling complete all as specified and as directed by Engineer in Charge.
S& F in repairs Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed by Engineer in Charge.
S&F in repairs 140 mm floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified and as directed by Engineer in Charge.
S&F in repairs 140 mm floor door stopper brass body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified and as directed by Engineer in Charge.
S&F in repairs 20mm dia curtain rails, Harrison rails, mild steel, chromium plated with fixing brackets stops, rollers etc complete all as specified and as directed by Engineer in Charge.
S&F in repairs stainless steel brackets for fixing of curtain rods complete all as specified and as directed by Engineer in Charge.
S&F in repairs 100 mm size mild steel Mortise lock 4 lever vertical type complete all as specified and as directed by Engineer in Charge.
S&F in repairs 100 mm size brass type Mortise lock 4 lever vertical type complete all as specified and as directed by Engineer in Charge.
S&F in repairs peg set of 6 & 4 fixing with wall / tiles / in any description complete all as specified and as directed by Engineer in Charge.
S&F in repairs stainless steel friction stay hinges of standard size complete complete all as specified and as directed by Engineer in Charge.
S & F in repairs Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engineer in Charge.
S & F in repairs Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed by Engineer in Charge.
S&F in repairs aluminum handles for window aluminum 100mm long extruded aluminum alloy anodised fixed to window in position left or right complete all as specified and as directed by Engineer in Charge.
S & F in repairs 75 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed by Engineer in Charge.
S & F in repairs100 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed by Engineer in Charge.
S&F in repair continuous (Piano) hinges, mild steel bright finished or electro galvanised with flap size 30mm complete all as specified and as directed by Engineer in Charge.
S & F in repair Hasp and staple for 75 mm of aluminium anodised complete all as specified and as directed by Engineer in Charge.
S & F in repairs using plywood, grade BWP, type marine proof 12mm thick 7 No of ply fixed with nails to timber frames as in pelmet boxes and similar works etc complete all as specified and as directed by Engineer in Charge.
S&F in repair 12 mm thick pre-laminated particle board interior grade one side with decorative choice laminations and other side balancing white lamination fixed in cup board shutter, shelves, partitions and similar items including dismantling and all necesary fittings complete all as specified and as directed by Engineer in Charge.
S&F in repairs Mild steel barrel tower bolts 100 mm size stove enamelled black, with bright bolt and fixed complete all as specified and as directed by Engineer in Charge.
S&F in repairs Mild steel barrel tower bolts 300 mm size stove enamelled black, with bright bolt and fixed complete all as specified and as directed by Engineer in Charge.
S& F in repairs Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) 300 mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer in Charge.
S&F in repairs PVC flexible waste pipe 32/40 mm dia for wash hand basin/kitchen sink etc complete all as specified and as directed by Engr-in-Charge.
M/s Pooja Enterprises
KRISHNA TRADING COMPANY
M/s Sriya Enterprises
BISAKHA PLUMBING WORKS
bansal construction
Nirman Construction Company
M/s Shiva Engineering
M/s J. M. Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .