Building Construction

Amount

Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, upto all depth including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling,ramping,watering(including shoring and struting)etc complete

Excavation for foundation in Hard Murrum/boulders for all depth including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling ,ramping,watering including shoring and struting)etc complete

Excavation for foundation in soft rock and old cement/lime masonry for all depth including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling ,ramping,watering

Conveying materials obtained from excavation including all lifts, laying in layers of 20cm to 30cm. for a lead of 2 km inclusive from the site of excavation to the site of deposition as directed.

Filling in plinth and floors with approved excavated material in 15cm to 20cm, layers including all leads ,watering and compaction complete.

Filling in plinth and floors with contractor's soil, sand or murum in 15cm to 20cm, layers including all leads watering and compaction complete.

Providing Pre- construtional anti termite treatment by treating the bottom surface and the sides of excavation at the rate of 5 litres of emulsion concnetrate of 0.5 % of Chloropyriphox per sqm of surface area with ten years guarnatee bond . As per I.S 6313 (part- III)-1973 (Quantity as per Item No 22.41 of schedule of rates of National Building Organisation)

Providing Pre- construtional anti termite treatment by treating the top surface of plinth filling at the rate of 5 litres of emulsion concnetrate of 0.5 % of Chloropyriphox per sqm of surface area with ten years guarnateebond . As per I.S 6313 (part-III)-1971 (Quantity as per Item No 22.43 of schedule of rates of National Building Organisation)

Providing soling using 80 mm size trap metal in 15 cm layer , including filling voids with sand-grit ramming watering complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for 50 mm thick below Plinth Beams including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete in M-15 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting ,curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/ pumping, compacting ,curing , finishing and roughening them if special finish is to beprovided and curing complete. (Excluding reinforcement andstructural steel).with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate (Natural Sand /Crushed sand VSI Grade finely washed etc)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete.

Providing internal cement plaster 20 mm thick in two coat in cement mortar 1:4 to concrete or brick surfaces in all positions including scaffolding and curing complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Finishing the terrace/chajja's slab integrally mixed with water proofing compound in c.m.1:3 proportion with 12 mm thick layer including curing, finishing using water proofing compound at the rate of 1kg per bag of cement and providing drip mould at the parapet and giving proper curved shape to the surface at the junction of slab and parapetetc. compleete.

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete

Providing and fixing mild steel grill work for windows,ventilatoretc 20 kg/sqm as per drawing including fixtures , necessary welding and paiting with one coat of anti corrosive paint and two coat of oil painting complete

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear)

Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally/ square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Crushed Sand.

Providing and laying machine cut polished kotah stone slabs 20 to 25 mm. thick for treads and risers of steps and stair case, in one piece upto 1.35 m width with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete.

Providing and applying one coat of seal cement primer of approved manufacture and shade including scafolding preparing the surface by cleaning dirt and other foreign mattter,sraping if necessary including scafoldingetc complete

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.

Providing and applying priming coat on concrete/masonry/ asbestos cement/ plastered surface of approved manufacture including scafolding preparing the surface by cleaning dirt and other foreign mattter,sraping if necessary including scafoldingetc complete

Providing and applying, plastic emulsion paint of approved quality, colour and shade to old and new surface in two coats including scaffolding, preparing the surface. (excluding primer coat) complete.

Providing structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed designs and drawing including fixing in position without connecting plates,braces etc. and paintings complete.

Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.).

Recovery of Royalty Charges as per Government of Maharashtra, Revenue and Forest Departments Gazette No 67 dated 15 May 2015 at the rate of Rs216.18 per Cum against the utilization of murrum/soil, solling/rubble and hand broken metal . (The said amount will be added in the bill of the contrator and will be equally deducted) (Fixed Rate) Soil Murum

Recovery of Royalty Charges as per Government of Maharashtra, Revenue and Forest Departments Gazette No 67 dated 15 May 2015 at the rate of Rs216.18 per Cum against the utilization of murrum/soil, solling/rubble and hand broken metal . (The said amount will be added in the bill of the contrator and will be equally deducted) (Fixed Rate) Rubble/Solling/Hand Broken Metal

Recovery of Royalty Charges as per Government of Maharashtra, Revenue and Forest Departments Gazette No 67 dated 15 May 2015 at the rate of Rs216.18 per Cum against the utilization of murrum/soil, solling/rubble and hand broken metal . (The said amount will be added in the bill of the contrator and will be equally deducted) (Fixed Rate) Sand

Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social, Health and Safety (ESHS) risks and ESHS Code of Conduct

NEXTGEN INFRAPROJECTS PRIVATE LIMITED (BID ID -6344591)

Shaikh Altaf Mubarak (BID ID -6344020)

DHANANJAY NAMDEV MUNDE (BID ID -6340613)

SANGLE SHASHIKANT CHANDRAKANT (BID ID -6344503)

MATHURAI VENTURES (BID ID -6344523)