SPECIAL REPAIR TO BLDG NO P-311A, P-312A, P-357A AND P-358A UNDER AGE B/R-I OF GE SAUGOR

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

M&L for Brick work with sub- class ‘B’ old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed

M&L for Brickwork with sub- class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering cement plaster, 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed

M&L for rendering cement plaster, 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:4, mixed with liquid WPC @ 200ml Per litre), finishing surfaces even and smooth without using extra cement complete all as specified and directed Note : Water roofing compound shall be measured and paid separately in respective item of this BOQ

M&L for rendering cement plaster, 5mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound for mixing in cement mortar or PCC complete all as specified and directed. Note : (i) The WPC compound specified in any item of this BOQ or ordered by Engineer-in-charge (if not mentioned in BOQ item but technically required shall only be measured and paid under this item. (ii) Contractor shall provide purchase vouchers for full quantities incorporated in the work and Engineer-in-charge shall keep defaced purchase vouchers in record and entered the same in MB

M&L for complete removal of existing treatment and applying two coats of cement base wall care putty (approx. thickness 1mm) on newly plastered surface of wall/ceiling as preparatory work to painting including brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and ready to receive the finishing coat of paint complete all as specified and directed. Make : Birla white / JK putty/ Berger

M &L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directed.