Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.3 LAccepted-AOC JAISALMER | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹28.7 L+₹2.3 L (8.82%)Rejected-Finance 1286 TOTA RAM KI DHANI JAISALMER RAJ 345001 | JAISALMER | JAISALMER | RAJASTHAN | 345001 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹28.7 L+₹2.4 L (8.96%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹29.2 L+₹2.9 L (10.9%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹30.9 L+₹4.6 L (17.3%)Rejected-Finance 521 DR K L ACHAL VANSHI COLONY JAISALMER 345001 RAJ | JAISALMER | RAJASTHAN | 345001 | L5 | Rejected-Finance Not being lowest |
Tender Value
₹35.8 L
EMD Value
₹71,500
Closing Date
1 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Jaisalmer
GE Army Jaisalmer - 345001
PROVN OF CERTAIN REVENUE AND MINOR WORKS AT MIL STN JAISALMER
2024_MES_640472_1
8348/23-24/E-8
Open Tender
Civil Works
Item Rate
180 days
Jaisalmer
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Army Jaisalmer
₹71,500
Yes
6 Apr 2024
2 Feb 2024
4 Mar 2024
2 Feb 2024
1 Mar 2024
16 Feb 2024
Amount
Surface excavation not exceeding 30cm and averaging 15 cm deep and getting out in soft/ disintegrated rock complete all as specified & directed by Engineer-in-Charge.
Excavation over areas n.exc 1.5m depth and getting out in any type of soil complete all as specified & directed by Engineer-in-Charge.
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and n exceeding 1.5 m in depth and getting out in soft/ disintegrated rock complete all as specified & directed by Engineer-in-Charge.
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and n exceeding 1.5 m in depth and in any type of soil complete all as specified & directed by Engineer-in-Charge.
Excavating in post holes (or similar holes) in hard/dense soil, each not exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 Mtr and making good surface complete all as specified & directed by Engineer-in-Charge.
Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/ disintegrated rock all as specified & directed by Engineer-in-Charge.
Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as specified & directed by Engineer-in-Charge.
Removing excavated soft/ disintegrated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge.
Removing excavated soft/ disintegrated rock to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge.
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge.
Removing excavated soil to a distance not exceeding 100 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge.
M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified & directed by Engineer-in-Charge.
M&L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundations, filling & mass concrete complete all as specified & directed by Engineer-in-Charge.
M&L for precast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in block masonry with solid blocks exceeding 10cm width and setting in cement mortar 1:6 complete all as specified & directed by Engineer-in-Charge.
M&L plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed by Engineer-in-charge.
M&L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in surface channels and drains etc like including necessary forms/ moulds complete all as specified & directed by Engineer-in-charge.
M&L for hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified & directed by Engineer-in-charge.
M&L for cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in surface channels and drains etc like including necessary forms/ moulds complete all as specified & directed by Engineer-in-charge.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered /stopped ends etc complete all as specified & directed by Engineer-in-Charge.
M&L for proving precast cement concrete Type B1 1:2:4 (using 20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) and similar articles with plain faces placed in position, set in CM(1:6) complete all as specified & directed by Engineer-in-Charge. Note: Reinforcement shall be measured and paid seperately.
M&L Brickwork with fly ash modular size bricks of class designation 75 (kgf/ sqcm) bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:4) complete all as specified & directed by Engineer-in-Charge.
M&L for Jodhpur stone roof slabs, self faced, 7.5cm to 10 cm thick, 25 cm to 35 cm wide, hoisted & set, jointed and grouted in cement mortar (1:3) complete all as specified & directed by Engineer-in-charge.
S&F 5 cm thick sand stone slabs Jaisalmer pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar (1:4) complete all as specified & directed by Engineer-in-charge.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge.
Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses complete all as specified & directed by Engineer-in-charge.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck indie with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fittied in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified & directed by Engineer-in-charge.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied & fixed in opening as per specification & drawing complete all as specified & directed by Engineer-in-charge.
S&F 125mm X 600mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified & directed by Engineer-in-charge.
S&F 30mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed by Engineer-in-charge.
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified & directed by Engineer-in-charge.
S & F 150 mm long Aluminium handles, cast type, anodised complete all as specified & directed by Engineer-in-charge.
S&F, 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required complete all as specified & directed by Engineer-in-charge.
S&F, 125mm size, butt hinges, heavy weight, cold rolled mild steel including necessary welding if required complete all as specified & directed by Engineer-in-Charge.
S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified & directed by Engineer-in-Charge.
S&F tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws complete all as specified & directed by Engineer-in-charge.
S&F, 300mm long mild steel sliding door bolts plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as directed by Engineer-in-charge.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. complete all as specified & directed by Engineer-in-charge.
M & L applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces for applying APP roof membraneb complete all as specified & directed by Engineer-in-charge.
S & F Mild steel work in framed work such as grills, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe290-Gde-E-165 complete all as specified & directed by Engineer-in-Charge.
M&L TMT mild steel bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to complete all as specified & directed by Engineer-in-Charge.
S&F, rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 410-W (Gde E-250 quality-A) with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, fittings and hanging, also fastering and fixing complete all as specified & directed by Engineer-in-Charge. Note :-Bed blocks for fixing of shall be measured and paid separately.
S&F 0.80mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified & directed by Engineer-in-charge.
S&F Rolled sections Fe 410W (Gde-E 250 quality B) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified & directed by Engineer-in-charge.
M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed by the Engineer in Charge.
M&L for glazed ceramic colour tiles 350x250mmx7mm/ 450X350X7mm thick, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed by the Engineer in charge.
M&L for granite (of any type) tiles 16 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed by Engineer-in-charge.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in sub base of flooring/ hard standing & finished the surface even & fair complete all as specified & directed by Engineer-in-charge.
M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring/ hard standing & finished the surface even & fair without using extra cement complete all as specified & directed by Engineer-in-charge.
M&L for 40 mm thick plain cement concrete (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in floors & finished the surface even & smooth without using extra cement complete all as specified & directed by Engineer-in-charge.
Filling under floor with soli, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified & directed by Engineer-in-Charge. Note :- Soil obtained from excavation shall be used.
M&L for 50 mm thick PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) laid in alternative bays as in plinth protection including finished the surface even & fair without using extra cement & filling the joints with mastic filling i.e one part of bitumen 85/25, 3 parts of sand by weight complete all as specified and directed by Engineer-in-charge.
M&L for 40 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) in Padding complete all as specified & directed by Engineer-in-charge.
M&L for Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, 20mm thick; joints grouted in cement mortar 1:2 with an admixture of metallic floor hardner, 5% by weight of cement and struck flush complete all as specified & directed by Engineer-in-charge. Note : Stone for the setts shall be of the best quallity , granite trap basalt or quartzite . use of sedimenetary stone shall not be permitted. Stone setts shall be approximately rectangular in shape with a tolerance of plus or minus 12mm.
M&L for rendering 15 mm thick, plaster in cement mortar (1:6) on stone masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing and finishing the surface even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.
M&L for rendering 15 mm thick, plaster in cement mortar (1:4) on stone masonry wall surfaces or surfaces other than fair faces of brick work or one side of lathing and finishing the surface even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.
M&L for rendering 15 mm thick plaster in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.
M&L for rendering 15 mm thick plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.
M&L for rendering 05 mm thick on ceiling surfaces in cement mortor 1:3 ,finished even and smooth without using extra cement complete all as specified and directed by the Engineer-in-Charge.
M&L rendering 15 mm thick in CM (1:4) on fair face of brick work/ concrete faces finished even and smooth without using extra cement with using water proofing compound as per manufacturers instructions complete all as specified & directed by Engineer-in-charge. Note: water proofing compound shall be measured and paid seperately.
Supply only integral waterproofing compound(ISI marked) complete all as specified & directed by Engineer-in-Charge.
M&L for preparation of new plastered surfaces of walls and applying two coats of distempering oil emulsion over a coat of primer complete all as specified & directed by Engineer-in-charge.
M&L for preparing new plastered or unplastered surfaces and applying three coats of white wash on ceiling all as specified & directed by Engineer-in-charge.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified & directed by Engineer-in-charge.
M&L for two coats of synthetic enamel paint over a coat of wood primer on new wooden surfaces of any description, not other wise described, over 10cm width or girth including preparation of surfaces complete all as specified & directed by Engineer-in-charge.
M&L for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.
S&F vitreous china white wash down water closet pan, pedestal pattern including fixing bolts, plastic water closet seat and cover with recessed bottom with MS CP hinging device (excluding flushing cistern and flush pipe) complete all as specified & directed by Engineer-in-charge.
S&F vitreous china squatting pan orissa pattern complete of size 580 x 440 mm white with intagral foot rest and making good to the floor complete all as specified & directed by Engineer-in-charge. (Make:-Cera Cat No S3010102, Hindware Cat part No - 20042 or equivalent in Appx 'C' list of makes).
S& F Vitreous China urinals, half stall type, white excluding flushing cistern, flush pipe and waste pipe bowl type (back or corner wall type) complete all as specified & directed by Engineer-in-charge.
S&F Oval type wash hand basin vitereous china flat back white incl CP waste coupling waste pipe brackets complete all as specified & directed by Engineer-in-charge. (Make:-Cera Cat No S20330103 , Hindware Cat part No - 10017 or equivalent in Appx 'C' list of makes).
S & F 15 mm bore Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
S&F 10 Litres, PVC, valve less, syphonic action type, Flushing Cistern, high level, white inlet, ball valve, float, and handle including brackets complete all as specified & directed by Engineer-in-charge.
S & F 4 mm thick figured Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified & directed by Engineer-in-charge.
S & F 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified & directed by Engineer-in-charge.
S & F 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified & directed by Engineer-in-charge.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified & directed by Engineer-in-charge.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete all as specified & directed by Engineer-in-charge.
S & F 75 mm bore PVC (SWR) bends of any radius with access door complete all as specified & directed by Engineer-in-charge.
S & F 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified & directed by Engineer-in-charge.
S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified & directed by Engineer-in-charge.
S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified & directed by Engineer-in-charge.
S& F Steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified & directed by Engineer-in-charge.
S&F steel water tubing 15mm bore dia medium grade galvanised with and including necessary all fittings and fixtures complete fixed to walls, ceilings etc complete all as specified & directed by Engineer-in-charge.
S&F stop cock 15 mm dia cast copper aloy with crutch handle CP facy type long shank complete all as specified & directed by Engineer-in-Charge.
S&F of Grating doom 100mm dia of PTMT (Minimum weight 25Gms) complete all as specified & directed by Engineer-in-Charge.
S & F 20 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified & directed by Engineer-in-Charge.
S & F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed by Engineer-in-Charge.
S&F PVC ball valve 20 mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass fernule acomplete all as specified & directed by Engineer-in-Charge.
S & F 450 mm long PVC connection pipe of 15mm bore with PTMT nut at both ends complete all as specified & directed by Engineer-in-charge.
S&F cast iiron floor trap 100mm size with grating including joining to waste fixed in cement concrete type B1 (1:2:4) complete all as specified & directed by Engineer-in-Charge.
M&L concrete bed of PCC 1:4:8 type C2 using 40 mm graded stone aggregate for 150 mm bore drain pipes bedding & hunching against the sides complete after pipes are laid, jointed and tested complete all as specified & directed by Engineer-in-Charge.
M&L 150 mm internal dia of reinforced cement concret drain pipe class NP-3 laid in tenches and jointedwith collars complete all as specified & directed by Engineer-in-charge.
M&L for On site Hume Pipe septic tank for 10 users designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for brick work in CM 1:4 plastering mixed with WPC incl RCC/CI manhole cover, cement pipe & Sludge chamber complete all as specified & directed by Engineer-in-Charge.
M&L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.20 M dia X 3.00 M deep complete all as specified & directed by Engineer-in-charge.
M&L for 100mm thick Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified & directed by Engineer-in-charge.
M&L for granite trap basalt 15 cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified & directed by Engineer-in-charge.
S&F 32 mm High density polyethylene pipe (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified & directed by Engineer-in-Charge.
M&L Point wiring used approved colour coding as per IS (Red, Black and Green) for single phase circuits), with multi-stranded copper conductor 1.5 sqmm nominal cross -sectional area, single core, PVC insulated and unsheated FRLS cable 1100 volts grade, ISI 694 marked with valid CML No. in and including medium grade, PVC concealed conduit MMS, ISI marked of dia not less than 20 mm and conduit accessories conceled in wall/roof/floor etc, ISI marked with valid CML No. (IS-9537 - 1983 for conduits and IS : 3419 - 1976 for conduit accessories) with terminated to suitable for mounting modular type switches, socket fan regulator etc PVC insulated multistanded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- Note : Modular switch and socket shall be measured and paid separately.
(a) One light point controlled by one switch.
(b) One fan point controlled by one switch.
(c) One 2/3 Pin socket outlet 6 amp controlled by one switch on the same board with other switches.
All as per item No. 99.00 here in before but with copper conductor cable of nominal class area 2.50 sq mm for phase ,neutral & earth for One 2/3 pin socket outlet 5Amps on independent board.
All as per item No 99.00 here in before but with copper conductor cable of nominal class area 4.0 sq mm for phase, neutral & earth for power socket point.
S&F modular switch one way 6 A,1 module complete all as specified & directed by Engineer-in-charge.
S&F modular socket 6A-2/3 pin combined 2 module complete all as specified & directed by Engineer-in-charge.
S&F modular switch socket combined 16 A, 5 pin, 3 module complete all as specified & directed by Engineer-in-charge.
S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified & directed by Engineer-in-charge.
S & F for MCB DB SPN 12 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 240 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing specifications, colour of wall complete all as specified & directed by Engineer-in-charge.
Supply and fixing 415 V 10 KA 'C' curve miniature ciruit breaker (MCB) of TPN 40 to 100 A poles and current carrying capacity in the db complete with connection testing and comossioning complete all as specified & directed by Engineer-in-charge.
Supply and fixing MCB's single pole 10 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified & directed by Engineer-in-charge.
S & F of LED tube light fitting 10 watt tube LED Neutral white in colour, 600 mm in length wall mounted LED batten,extruded aluminium heat shink provided for efficient heat dissipation & integrated electronic driver,optic diffused type ENDURA LINER NEO including all electric connection with whilte flexible cord 1.50 Sqmm 3 core as required complete all as specified & directed by Engineer-in-charge.
S & F surface and wall mounted LED tube light along with fixture, 4 ft, 20 W, extruded aluminium housing provided for efficient heat disspation with polycarbonate, operating voltage 240 V, 50HZ, AC supply and operating tempureture 0 to 50 C, power factor >0.9, lumen output > 2000 and provision of new 3 core multistanded copper conductor of size 23/0.193 from ceiling rose to fitting with white colour flexible pipe complete all as specified & directed by Engineer-in-charge.
Supply and fixing of building security light fitting LED 35 Watt IP 66 IK 07 pressure dia cast aluminium housing with high efficient LED as lihjting souce and PC cover having TOP opening sepreate drive compartment etc and connecting complete all as specified & directed by Engineer-in-charge.
S& F bracket of GI pipe medium grade of 40mm dia, 1.2 meter in length clamps made of FI 40 mm x 6mm incl nuts, bolts & washers, painting complete all as specified & directed by Engineer-in-charge.
Supply & fix Steel body heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified & directed by Engineer-in-charge.
Cutting hole of masonry wall and making good opening to match with existing specifications suitable for fixing of 300 mm exhaust fan and making good the finishes as per existing surface of wall complete all as specified & directed by Engineer-in-charge.
M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom, burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground levl connected to galvanized iron wire 4 mm dia as earthing lead up to Panel /DB BOX as per site requirement by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection including test point terminal cover the earhing hole by PCC chamber and GI cover and testing on completion complete all as specified & directed by Engineer-in-charge.
NOTE FOR ITEM No. 115.00 [i]. Excavation & earth work in any type of soil including removing of surplus material upto 100M [ii]. PCC (1:3:6) type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC (1:2:4) type B1 cover 50x50 cm with 8mm round bar @ 15 cm C/C both ways. [iii]. Main earthing strip from earth electrode to test point upto 7.5 mtr. [iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs and charcoal & salt as reqd. [v]. GI protection pipe of size 40 mm bore light grade 7.5m.
Supply, lay, test and commissioning of LT UG, XLPE insulated, heavy duty, 1100V grade of size 16 sq mm. 4 core electric cable with aluminum conductor, served with an inner sheathing of PVC tape armored with galvanized steel wire or tape and overall PVC sheathed, laid in trenches or passing through pipe, making all connections with and including provision of necessary glands, lugs, bushing etc as required complete all as specified and as directed by Engineer-in-Charge of following sizes:- Note : Earth work excavation sand cushioning, Jodhpur Stone patti, GI protection pipe shall be measured and paid separately under respective items of this schedule.
M&L for sand cushioning to under ground cable using tibba sand and gently punning to cushioning to cable complete all as directed by Engineer-in-Charge. Note :- Punned thickness of sand cushioning shall only measured for the purpose of payment.
Supply & laying 40 to 50mm thick roughly hammer dressed Jodhpur stone patti cable cover 25cm to 30cm wide and n. exc 60cm long each laid dry abutting with each other with maximum gap between adjacent slabs n. exc 10mm complete all as specified & directed by Engineer-in-charge.
Material and labour for cutting the existing bituminous road / hard standing to size not exceeding 45cm wide and depth not less than 45cm for passing of UG cable through GI pipe and making good the disturbed surface filled with excavated material and top 200mm depth with plain cement concrete 1:3:6, type C1 using 20mm graded aggregate complete all as specified & directed by Engineer-in-charge.
S&F steel water tubing 50 mm bore, 'light grade' galvanised, as protection of cable etc complete all as specified & directed by Engineer-in-charge.
S&F steel water tubing 20mm bore dia medium grade galvanised with and including necessary all fittings and fixtures complete fixed to walls, ceilings laid under floors/ trenches etc complete all as specified & directed by Engineer-in-charge.
S&F steel water tubing 50mm bore dia medium grade galvanised with and including necessary all fittings and fixtures complete fixed to walls, ceilings laid under floors/ trenches etc complete all as specified & directed by Engineer-in-charge.
S&F gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for the size 20 mm bore with fittings and accessories. ISI marked and as per IS 14846 complete all as specified & directed by Engineer-in-Charge.
S&F gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for the size 50 mm bore with fittings and accessories. ISI marked and as per IS 14846 complete all as specified & directed by Engineer-in-Charge.
M&L for cutting the existing pipe and making threading for inserting and including GT Tee 50x50x40mm complete all as specified and directed Engg-in-Charge.
GEMRARAMCONTRACTOR
AMBEY MAA CONSTRUCTION COMPANY
M/s Ramniwas Bishnoi
MARUDHARA CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .