MISC REPAIR AND MAINT TO BUILDINGS INCL PLUMBING JOINERY SANITARY FITTING AND OTHER ALLIED CIVIL WORKS AT INF BN NO 1 and 2 UNDER AGE B/R-II SUBDIVISION OF GE BIRCHGUNJ PORT BLAIR

Amount

Taking down chowkats or frames with shutters area n.exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified and as directed by Engineer -in-Charge.

All as per Item No. 1 here in before but exc 1.5 Sqm but n.exc 4.00 Sqm complete all as specified and as directed by Engineer -in-Charge.

Taking down shutters of any description n. exc 1 Sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by Engineer-in-charge.

Taking down shutters of any description exc 1 Sqm and n exc 2 sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by Engineer-in-charge

Supply and fix 2nd class hardwood, plain, solid, straight chowkats and frames wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed by Engineer -in-Charge.

Supply and fix 2nd class hard wood 35 mm thick, plain, framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, the sizes of members of shutters shall be specified and as directed by Engineer-in-Charge.

Supply and fix 2nd class hardwood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads of securing glass, gauze etc and fitted to chowkats complete all as specified and as directed by Engineer -in-Charge.

Supply and fix 2nd class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass guaze etc complete all as specified and as directed by Engineer -in-Charge.

Supply and fix framed work such as grill gratings etc with ends of bars riveted forged into spikes guard bars barred iron fixed independently in wooden frames and similar work confirming to Fe-290 Gde- 165, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer -in-Charge.

Material and labour for preparation of old steel surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Supply and fix 2nd class hardwood small fittings such as brackets, door, stoppers etc articles n.exc 200 Cubic centimeter each complete all as specified and as directed by Engineer -in-Charge.

Material and labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for one coat of synthetic enamel paint on old painted wood/wood based surfaces exceeding 10 cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Supply and fix solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge.

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge.

Supply and Fix aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/ partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, all as specified and as directed.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply and Fix powder coated aluminium (minimum coating 50 microns) Door / window / Ventilator/ partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, all as specified and as directed.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only 4mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge.

Supply only 4mm thick figured glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge.

Supply only aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples etc. complete all as specified and as directed by Engineer-in-charge.

Supply only 12 mm thick Prelaminatd particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed to aluminium frames complete all as specified and as directed by Engineer -in-Charge.

Supply and fix in repairs 12 mm thick Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed to aluminium frames complete all as specified and as directed by Engineer -in-Charge.

Supply and Fix in repairs aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples etc. complete all as specified and as directed by Engineer-in-charge.

Supply and fix in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed with beading as in pelmet box, complete all as specified and directed by Engineer-in-Charge.

Supply and fix 4 mm thick plain sheet glass ordinary quality and glazing with oil putty /wooden beads in square n.exc.0.50sqm in each pane on new or old windows incl hacking out old complete all as specified and directed by Engineer-in-Charge.

Supply and fix 3 mm thick Figured glass, pin headed type ordinary quality and glazing with oil putty /wdn beads in square n.exc.0.50sqm in each pane on new or old windows incl hacking out old complete all as specified and directed by Engineer-in-Charge.

Supply and fix Butt hinges, 100mm length B-21 type extruded stainless steel with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply and fix Butt hinges, 75mm length C-22 type extruded stainless steel with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply and fix 300mm aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and as directed by Engineer -in-Charge.

Supply and fix 150mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge.

All as per item No 31 here in before but 100mm long.

Supply and fix 150mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed by Engineer -in-Charge.

All as per item No 33 here in before but 100mm long.

Supply and fix decorative/ fancy designer drapery rod 20 to 25mm dia fixing to wall with suitable brackets etc complete all as specified and directed.

Supply and fix decorative/fancy designer brackets suitable for decorative drapery rods 20 to 25mm dia etc complete all as specified and as directed.

Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement complete all as specified and as per directed by Engineer-in-Charge.

Material and labour for rendering 5 mm thick in CM 1:3 finished even and smooth without using extra cement on ceiling including cement slurry 3 kg/sqm complete all as specified and as per directed by Engineer-in-Charge.

Material and labour for 15mm thick external rendering in two layers of 5mm thick in CM (1:4) mixed with water proofing compound (water proofing compound shall be @3% by weight of cement) over a coat of 10mm thick in CM (1:6) over brick or concrete surfaces finished even and fair. Note: Supply only WPC will be measured and paid separately

Material and labour for removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 20 mm from floor/roof slab/chajjas and similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles including necessary scaffolding etc and removal of debris to a distance not exceeding 50m, complete all as specified and as directed by Engineer -in-Charge.

Material and labour for application of high build polymer modified cement mortar (1:2.5) mixed with 3 kg SBR per bag of cement in ceiling surfaces 10 to 20mm thick in two layers surfaces over a coat of bonding agent of Nito Bond SBR (1 kg SBR + 1 Ltr water + 3 kg cement) complete all as specified and as directed by Engineer -in-Charge.

Material and labour for removing loose and broken concrete by chiselling /picking etc upto a depth of 50 to 100 mm from columns, beams and similar structural members cutting edges cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign matters

Material and labour for applying one coat of anti-corrosive primer @ 0.25 Lit/Sqm for the steel area to exposed old and new reinforcement to the full circumference and length of bars to form unbroken 40 Micron thick film all as specified and directed by Engr-in-Charge.

Material and labour for applying one coat epoxy bonding agent @ 2.6 sqm/lit or as per manufactures instruction to old concrete surfaces of columns, beams and similar structural members all as specified and directed by Engr-in-Charge.

Use and waste of form work to sides of columns, Pillars, posts and sanctions for rough finished surfaces including edges complete all as specified and as directed.

Material and labour for non-shrink, cementitous micro concrete mixed with 12.5 graded stone aggregate using Renderoc RG or equivalent by weight (18 Kg Aggregate :25 Kg Renderoc RG) respectively (as per manufacture’s instruction) laid in average thickness 80 to 100 mm in situ including necessary watertight form work complete all as specified and directed. Make: fosroc/ bostik/STP

Material and labour for spraying curing compound as per manufactures instruction on freshly cast concrete surfaces all as specified. Make : Concure WB white of Fosroc.

Material and labour for drilling holes in slabs/wall/column/beams for anchor steel reinforcement incl washing with water, inserting lock set P' in the holes and all as specified and directed by Eng-in- Charge. Make : Lock set "P" of Fosroc or equivalent.

Demolition of RCC in fins, fascia column edges including cutting reinforcement etc, complete all as specified and as directed by Engineer -in-Charge.

Use and waste of Form work to flat surfaces of RCC fins, fascia ,chjjas and similar items including edges, for fair finished surfaces complete all as specified and as directed by Engineer -in-Charge.

Material and labour for RCC M-30 Design mix as in fins, fascia, chajjas etc, complete all as specified and as directed by Engineer -in-Charge.

Material and labour for Plain Cement Concrete (1:2:4) type B-1 using 20 mm graded stone aggregate in roof kerbs, mud stops chamfered on edges complete all as specified and as directed by Engineer -in-Charge.

Material and labour for mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and as directed by Engineer -in-Charge.

Material and labour for mild steel TMT bars 6 to 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as specified and as directed by Engineer -in-Charge.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level)as in plinth protection etc complete all as specified and as directed by Engineer -in-Charge.

Material and labour for hard core of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface

Material and labour for 100mm thick Plain cement concrete (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection, pavings, laid in panels and finishing fair and even, including necessary form work complete all as specified and as directed by Engineer -in-Charge.

Disconnecting of existing tank of capacity 500 ltr and setting aside or lowering if required for repairs, cleaning etc and refixing in position hoisting and connecting, complete all as specified and as directed by Engineer -in-Charge.

Disconnecting of existing tank of capacity 1000 ltr and setting aside or lowering if required for repairs, cleaning etc and refixing in position hoisting and connecting, complete all as specified and as directed by Engineer -in-Charge.

Taking up or down, and refixing of 25mm bore, GI tubing, medium grade, in new or old positions including cleaning for refixing complete all as specified and as directed by Engineer -in-Charge.

Taking up or down, and refixing of 20mm bore, GI tubing, medium grade, in new or old positions including cleaning for refixing complete all as specified and as directed by Engineer -in-Charge.

Material and Labour for taking down existing roof treatment of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises and apply water proofing treatment with the following specifications complete all as specified and as per manufacturer’s instructions:- (i) Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement as leveling course (ii) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. (iii) Laying APP membrane (STP Aquashield or equivalent) weighing not less than 3.5Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. (iv) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane. Note:- Water proofing compound shall be measured and paid separately)

Supply only water proofing compound (Powder) conforming to IS-2645 1975.

Material and labour for painting with two coats of oil bound distemper over a coat of primer on newly plastered or untreated surfaces of internal walls including necessary preparation of surfaces complete all as specified and as per directed by Engineer-in-Charge.

Material and labour for painting with two coats of oil bound distemper over a coat of primer on old plastered surfaces of internal walls including complete removal of existing treatment complete all as specified and as per directed by Engineer-in-Charge.

Material and labour for two coats of OBD over a coat of primer on newly plastered surfaces of ceiling including necessary preparation of surfaces all as specified and directed.

Material and labour for preparing old decorated surfaces of ceiling and applying two coats of OBD over a coat of primer all as specified and directed.

Material and labour for two coat of weather proof exterior acrylic emulsion paint with antifungal property over a coat of primer on newly plastered external wall surfaces including preparation of surfaces etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 20mm dia aluminium anodised curtain rod with brackets, fixed to pelmet box/wall etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs butt hinges, 100mm length B-21 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs butt hinges, 75mm length B-12 type extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed , complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs 300mm aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and as directed by Engineer -in-Charge.

Supply and fix in repairs 150mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge.

Supply and fix in repairs 100mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge.

Supply and fix in repairs 150mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed by Engineer -in-Charge.

Supply and fix in repairs 100mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed by Engineer -in-Charge.

Supply & Fix in repairs 140mm long door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed by Engineer -in-Charge.

Dismantling of plain or corrugated steel sheeting of any gauge, thickness, including nainital or similar pattern roof covering, complete all as specified and as directed by Engineer - in - Charge.

Supply and fix for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self-tapping screws or L'or 'J' type hook, complete all as specified and as directed by Engineer -in-Charge.

Material and labour for prepainted galvalume aluminium zinc coating GI based plain sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in ridges, valleys hips etc fixed with self-tapping screws or L'or 'J' type hook , complete all as specified and as directed by Engineer -in-Charge.

Supply and fix 0.63mm thick, ISI marked galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with GI 'L' type or 'J' type or cranked hook bolts and washers in roof with grade of zinc coating complete all as specified and as directed by Engineer -in-Charge.

Supply and fix 0.63mm thick plain galvanised, mild steel sheeting, in ridges, hips, valley guttters, drip and straight flashings (length and girth as fixed) with grade of zinc coating complete all as specified and as directed by Engineer -in-Charge.

Dismantling of mild steel work of any description not otherwise specifically provided for complete all as specified and as directed by Engineer -in-Charge.

Supply and fix Mild Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS: 1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed by Engineer -in-Charge.

Supply and fix rolled mild steel structural steel work of angle, channel etc. confirming to Fe-410-W (grade E 250) quality 'A', fixed as in purlins, brackets etc, complete all as specified and as directed by Engineer -in-Charge.

Supply and fix mild steel flat iron as in supports for wind ties, wall ties, clamps and similar small articles conforming to Fe 290 Gde-E-165 complete all as specified and as directed by Engineer -in-Charge.

Dismantling of boarding, of any thickness any type and in any position with nails/ screws, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix second class hard wood weather boarding 20mm thick plained one side with butt joints as in eaves board complete all as specified and as directed by Engineer -in-Charge.

Dismantling of ceiling boards of any description and any thickness, fixed in any position including cover fillets if any, complete all as specified and as directed by Engineer -in-Charge.

Supply and fix in Eco board 600 X 600 X 4mm thick decorative type fixed in aluminium frame work with screws or nails etc including two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs for false ceiling with aluminium grid work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle and suspended with 3.15mm dia, GI wire, hooked to roof with needful adjustment bolts at an interval of 1.20m, centre to centre staggered and board with Eco board, decorative type, size 600x600x4mm thick, finished with two coats of oil bound distemper over a coat of primer on surfaces including dismantling old frame work and board complete all as specified and as directed by Engineer-in-Charge.

Supply and fix rotational moulded polythelene water storage tanks ISI marked (cylindrical vertical with closed top) of 500 Ltrs capacity with tank cover (top), hoisted and fixed in position, including taking down existing with all connections complete all as specified and as directed by Engineer -in-Charge.

Supply and fix rotational moulded polythelene water storage tanks ISI marked (cylindrical vertical with closed top) of 1000 Ltrs capacity with tank cover (top), hoisted and fixed in position, including taking down existing with all connections complete all as specified and as directed by Engineer -in-Charge.

Supply and fix 20mm dia nipple of PTMT, suitable for HDPE water tank, min weight 38 gms, complete all as specified and as directed by Engineer-in-Charge.

All as per item No 95 here in before but 25mm dia, min weight 65 gms

Supply and fix in repairs 20mm dia nipple of PTMT, suitable for HDPE water tank, min weight 38 gms, complete all as specified and as directed by Engineer-in-Charge.

All as per item No 97 here in before but 25mm dia, min weight 65 gms

Supply and fix in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 142 gms, complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs gun metal globe or gate valve, 20mm dia, screwed down high pressure with iron wheel head, screwed both ends for iron pipes or for union complete all as specified and as directed by Engineer-in-Charge

Taking up or down, 15mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 25mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 15mm bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 20mm bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 25mm dia bore ISI marked, GI tubing medium grade, galvanised with all fittings and fixed, complete to walls and ceilings or laid in floor etc complete all as specified and as directed by Engineer-in-Charge.

Supply and laying 20mm external dia CPVC pipes SDR11 including Plain CPVC fittings SDR11 fittings (Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End plugs, Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc) and is jointed with CPVC solvent cement as on walls/ ceiling/ floors complete all as specified and as directed by Engineer-in-charge.

All as per item No 107 here in before but 25mm external dia

Demolition of cement concrete of any description and in any position complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 15mm thick rendering in cement mortar 1:3 on fair faces of brick or concrete surfaces, finished even and fair in sunken floor using water proofing compound all as per manufacturer’s instructions etc, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for PCC 1:5:10 type E2 (using 40mm graded aggregates) for filling and mass concrete in sunken floor, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for applying for a evenly tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm in sunken floor including cleaning surfaces complete all as specified and as directed by Engineer-in-charge.

Material and labour for 30mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in sub base of flooring complete all as specified and as directed by Engr-in-Charge.

Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed by Engineer -in-Charge.

Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge.

Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge.

Material and labour for coloured glazed ceramic tiles 300 X 200 X 7mm thick as in dado/skirting set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including rendering 10mm thick in CM 1:3 on wall surfaces complete all as specified and as directed.

M&L 18-20mm thick granite stone (of any type and coloured in single piece ) work (table rubbed and polished) in steps, jambs, pillars, window cills, flooring, cooking platform machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite including grinding and polishing types over & including screed bed 20mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Material & labour for designer coloured chequred cement concrete tiles of size 20cm x 20cm x 25mm with jointed and pointed in neat cement slurry with grey cement and pigment to match the shade including screed bed 20mm in CM (1:6) all as specified and directed.

Supply and fix in repairs Brass Chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs for brackets to item no 119 complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs,10 litre capacity, low level PVC flushing cistern, syphonic action type white colour, with inlet ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engineer-in -charge

Supply and fix in repairs viterous China squatting pan "Orissa Pattern"size 630 x 450mm white with integral foot rest, connection to trap and to flushing pipe, anti syphonge pipe etc, including making good the floor complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair 32mm brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connection including necessary packing union and cap complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs stainless steel gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs vitreous China wash hand basin of size 550 x 400mm white flat back including chromium plated pillar tap, 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/ 40mm-60 gms), including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screw both ends for 15mm dia iron pipe or for union and fixed complete all as specified and as directed by Engineer -in-Charge.

Supply and fix in repairs 15mm size PVC Connection with C P Brass Nuts of length 450mm, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs brass chromium plated, towel rack, with single rail complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs chromium plated, stainless steel towel rings, 200mm dia complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs brass chromium plated toilet paper holder recessed type, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 15mm bore stop valves fancy type chromium plated with long shank and cup, concealed type, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs vitreous China urinal, bowl type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or outgoing pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs two way bib cock, brass CP mixture for mixing hot & cold water complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair PVC waste pipe, 32mm dia, for WHB, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair PVC waste pipe, 32mm dia for urinal, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair PVC waste pipe, 40mm dia for sink, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Bib tap, cast copper alloy chromium plated,15 mm dia with fancy type screwed down for iron pipes or brass ferule etc, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Bib tap, cast copper alloy, 15mm dia with crutch or butterfly handle screwed down for iron pipes complete all as specified and as directed by Engineer-in-Charge.

Supply and fix kitchen sinks with drainage boards, ISI marked [As per IS 13983- 1994] made of stainless steel of AISI 304 grade 18/8 qualilty, 1mm thick with plugs, washers & wastes, including in cement mortar 1:3 to dwarf wall or incl fixing cantilever brackets and connecting union to pipes overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed by Engr in Charge.

Supply and fix in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer -in-Charge.

Supply and fix in repair internal kit with syphone for PVC flushing cistern 10liter capacity, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour (Minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Brass Chromium plated shower rose 125mm size, with swivel joint, fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-Charge.

Demolition of precast concrete block walling, built in cement mortar including all quoins, arches, pillars, etc

Material and labour for cement concrete solid block masonry with block of precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate exc 10cm width and set in cement mortar (1:6) complete all as specified and as directed.

SK CONSTRUCTION

Priya construction

M/s Kamal Electrical

Ravi Enterprises

MAJUMDAR FURNITURE

RADHA GOVIND CONSTRUCTION