REPAIR TO PLASTERING, FLOORING, JOINERY, SANITARY FITTING AND OTHER MISC WORK AT CDA UNDER AGE B/R-III OF GE (SOUTH) MEERUT CANTT

Taking down of chowkhat with shutter (without taking off shutters from the frame) area n-exc 1.50 sqm each complete all as specified and directed

Ditto all as per item No 1.00 above but area exc 1.50 Sqm but n-exc 4.0 Sqm each

Taking down of sutters of any description exc 1.0 sqm but n-exc 2 Sqm each

Material and labour for PCC 1:3:6 type C-1 (20mm graded agg) filling in pressed door chowkat/hold fast blocks complete all as specified and directed

Supply and fixing 150mm long aluminium handles cast type anodized complete all as specified and directed by Engr-in-charge.

Framed work such as grills, gratings, etc.. with ends of bars, shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk, ways; railings; framework of, water tanks and similar work, conforming to Fe.290.Gde-E-165

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

S&F, Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa of approved pattern/design as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F 50mm thick Puff insulated, colour coated, pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick on both sides of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F rolled mild steel in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W Gde E-250 quality A complete all as specified and directed.

M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and including a coat of pink primer (by spraying) all as specified & directed

Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on new or previously untreated steel surfaces of any description incl preparation of surface over 10cm width or girth complete all as specified and directed by Engr-in-charge.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

S&F in repair Sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one chromium plated suitable waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm long complete all as specified and directed.

Description all as per item No 59.00 here-in-before but for 20 mm bore pipe

S&F in repair grating 100/125 mm dia of ,steel chromium plated with or without hole as required complete all as specified and directed.

M&L for non skid coloured Ceramic tiles,first quality( of approved class , colour and design/ shade ) 7 to 8 mm thick (Square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with shade of coloured tiles over and including 15 mm thick screed bed in Cement mortar 1: 6 C

Per Qtl

S&F stainless steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one all as specified and directed Make : Bluestar/ Nirali/ Pearl.

M&L 75 mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregates as in plinth protection finishing cement concrete even and smooth without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering 15 mm thick using ready mix plaster bags on brick work or concrete surfaces, finished surface even and smooth as in wall complete all as specified and directed.

M&L Rendering 5 mm thick in cement mortar (1:3), on fair faces of concrete surfaces, finished even and smooth, over and including fixing of chicken wiremesh with nails and set with cement slurry and paste before plastering on ceiling complete all as specified & directed.

M&L for preparing new plastered or un-plastered surfaces and applying of wall care putty 1.5 to 2 mm thick on existing prepared surface for smooth finishing and applying two coats of oil emulsion distemper over a coat of suitable primering as a base coat as per manufacturer's instructions, complete all as specified and directed.

M&L for preparing new plastered or un-plastered surfaces and applying 1.5 to 2 mm thick exterior grade wall care putty on existing prepared surface for smooth finishing and applying two coats of weather proof exterior emulsion paint silicon based over a coat of water based suitable primering as a base coat as per manufacturer's instructions with using roller complete all as specified and directed.

Complete removal of existing treatment on wall/ceiling/roof projections including chajja, facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc and applying 1.5 mm to 2 mm thick wall care putty making smooth surface by skilled labour complete all as specified and directed.

M&L for applying two coat of oil emulsion distemper(OBD) (on plastered or unplastered surface) using roller on old surfaces, complete all as specified and directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed

S&F in repair PVC (SWR) branch piece,110 mm bore, single (single Y) equal or unequal and jointed with approved adhesive complete all as specified & directed.

Supply & fix in repair PVC (SWR) vent cowl 110 mm bore, and jointed with approved adhesive complete all as specified & directed.

M&L, 75mm dia, PVC (SWR) multi floor trap, with grating including jointing with solvent cement, complete all as specified & directed.

M&L, PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement, complete all as specified & directed.

Disconnecting & taking down existing water tank any type and S&F rotational moulded polyethylene water storage tanks 500 liter capacity (cylindrical vertical with closed top) with and including PVC ball valves, high pressure with polythene float and fly nut complete screwed for 20 mm bore iron pipe or for brass ferrule, hoisted and fixed in position all as specified in SSR Part I 2009 complete all as specified & directed.

All as per item no 102 but water storage tanks 1000 liter capacity complete all as specified and directed.

S&F in repair ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe 20 mm dia or for brass ferrule complete all as specified and directed.

M&L for dismantling/taking down old dilaped/broken RCC chajja, facia, dropwall, roof projection, shelf/rack etc and repairing/re-casting of the same with reinforced cement concrete type B1,1:2:4(20mm graded stone aggregate), including necessary formwork, scaffolding and TMT steel reinforcement if required, upto four storeys and making surface smooth and finish with PCC type B0, 1:2:4(using 12.5mm graded aggregate) as in fillet, rendering 5mm thick in cm 1:3 on soffit with drip course and 10mm thick rendering in cm 1:4 for concrete surface with WPC after strucking off formwork, area not exc 2.0 Sqm each, including removal of deberies from the s

ite and disposed out side the the MD land, complete all as specified and directed. Note- Steel reinforcement whenever used will be measured and paid separately under respective items)

M&L for cutting and completely removing of bushes, small trees, vegetation (Peepal, small plants etc) growth alongwith its roots on building wall/roof/chhajja/parapet wall/water tank staging area etc or like of any dia and girth at any height by necessary demolition of brick, concrete, plaster portion if required and filling holes on and making good disturbed surfaces to match with existing surface with cement mortar 1:4 with and including WPC and PCC 1:2:4 as per site requirement, complete all as specified and directed.

Material & labour for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work putside of defence land.(b) Material & labour for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement. on wall of sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix PVC (SWR) floor trap of 75/110mm dia and 32mm dia GI pipe medium grade, 450m long (for draining out the water) all as directed by engineer-in-Charge

S&F for lnsulated PVC hollow Wall/ceiling Lining consisting of PVC Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted to wall/ceiling. PVC Insulated Panel with Single Side Prelam PVC sheet used instead of plain colour sheet of approved quality & design, over and including 3mm dia MS square mesh of approved size, fixed to MS frame work, including dismantling of boarding, any description, fixed in any position with nails/screw complete all as specified and directed.

Supply and fixing for GI snap grid frame work of size 605 x 605 mm, for false ceiling comprising 40 x 25 x 2mm GI angles weight 0.36 kg fixed all along the wall at ends and with GI main and cross tee of size 36.50 mm x 25 mm x 1.4 mm weight not less than 0.24 kg per RM including GI cleat bolts nuts and washers and 2mm dia GI wire suspenders in alternates panel and preparing holes / chases in wall for fixing angle including fixing suitable for non asbestos fibre cement boards in ceiling including 4 mm thick, non-asbestos ceiling boards as per approved make of size 600 x 600 mm, fixed or laid / inserted to timber / GI / Aluminium frame work with screws in ceiling, with and including Dismantling of ceiling board of any description, fixed in any position complete all as specified and directed by Engr-in-charge.

Providing and fixing in repair Gypsum Board 12mm thick in ceiling, with and including fixed over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh with screw to flat surface as per manufacturers instructions, including dismantling of ceiling board of any description, fixed in any position complete all as specified and directed by Engr-in-charge.

Material and labour for cleaning of sewage lines from manholes to manhole of any length (Manhole to manhole consider Each Job) for any depth by rodding and well flushing the sewage lines after removing sludge including taking off the manhole covers and refixing after cleaning of manhole of any size and depth. The manhole lines to be cleaned by mechanical sludge trailor and all sludge to be removed a distance of 500m outside of the Cantt area (Note : (a) The contractor shall provide sufficient labours everyday to clear for all types sewage line blockage complaints, (b) The period of completion for each complaints shall be 24 Hours (c) It will be the responsibility of the contractor to get the complaints completed with in stipulated period the labour shall be made available during the office hours for any complaints (d) The payment shall be made to the contractor on the basis of job done on complaints slip for each complaint. No payment shall be done for any incomplete work .The contractor to quote the rates accordingly).

Cleaning/Clearing blokage of WC's/traps(any type) upto & incl 1st Manhole etc complete all as spd and directed.

Dewatering of soak well/soak pit including connected septic tank by discharging the sewage water, sludge, solid waste etc into a sealed tanker/truck with pipe system including vehicle and other arrangements and disposing outside cantt area, complete all as directed by Engr-in-Charge.(Note: 4000 Ltr capacity tank shall be measured as one unit)

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as spd & directed.

M & L PCC (1:2:4) Type B-1 using (20mm graded stone aggregate) as in precast cover slabs for man holes/Soakage Well/Septic Tank, lintels and like, set in cement mortar 1:4, with and including necessary form work, placing in desired position, complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Each Job

M&L for RCC NP3 150mm diameter pipes laid on 150mm thick concrete bed with and including excavation in any type of soil, RFR, removing of surplus soil, including construction of manholes/drop manhole of standard size as directed, made of Brick masonry, 15mm thick rendering in cm 1:4 and covered with RCC covers, including all related items and activities, to execute and make sewer line functional, complete all as spd & directed.

Labour only, desilting, completely removing of vegitation growth, cleaning of surfacecs, etc of existing drain of any section, and thrown away out of defence land, complete all as spd & directed.

M&L for glazed coloured ceramic tiles ,first quality ( of approved class , colour and design/ shade ) of size 450 x 300 x 7 to 8 mm thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with shade of coloured tiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed.

M&L for cement concrete, type B-2 1:2:4 using (40 mm graded stone agg) in surface channels and drains

M&L for ante-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed.