SR/REPLACEMENT OF EXISTING BARBED WIRE FENCING WITH CHAIN LINK FENCING FROM MGR TO ZERO POINT AT AF STN BARNALA UNDER GE (AF) HALWARA

Amount

Excavating in post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 M and making good surface complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed

S&F MS angle iron posts and struts in fencing including cutting top to shape as directed, drilling holes, welding and notching for wire etc and flat iron fillets for securing wire mesh including bedding or riveting etc conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed..

Supply only chain link MS galvanised fencing of mesh size 80 mm x 80 mm dia of wire 4mm complete all as specified and directed. Note : A board of officer shall be detailed by the Accepting Officer to ascertain the actual weight of chain link fencing as and when brought by the contractor at site.

S&F 10mm dia and over mild steel TMT bars for tightening of chain link fencing including bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F mild steel screw bolts ( machine made) with hexagonal heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, not exc 5cm and dia of neck 10mm complete all as specified and directed.

S&F mild steel screw bolts ( machine made) with hexagonal heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, not exc 5cm and dia of neck 11 to 15mm complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed.

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (Each line wire to be measured) complete all as specified and directed.

Dismantling posts or struts (Wood, Steel or RCC) any section, including taking down embeded portion in concrete and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh any type

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

M&L for brick work with sub calss B bricks old size bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified.

All as per srl item No 15.00 here-in-before but except bricks. Note : Serviceable bricks retrieved against Sl item No 14 above shall be re-used in the work after cleaning.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in Cement Mortar 1:4 complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on concrete/brick work surfaces and finishing surface fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and direcrted.

M&L for cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregates) as in coppings, benching etc complete all as specified and directed.

JINDAL AND COMPANY

CHOUDHARY ENTERPRISES

S K BANSAL AND CO.

KG BUILDERS

m/s k.k. construction co.