Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.6 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹8.9 L+₹1.1 L (13.5%)Rejected-Finance NEW ABADI KISHANPURA SURATGARH 335804 DISTT SRIGANGANGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹10.2 L+₹2.4 L (30.2%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST |
Tender Value
Refer Docs
EMD Value
₹20,000
Closing Date
22 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL PRIYESH SRIVASTAVA
GE (AF) SURATGARH
REPAIR TO ROOFING AND ALLIED WORKS IN ZONE B IN TECH AREA AT AF STATION SURATGARH
2023_MES_577158_1
8972/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) SURATGARH
AS PER TENDER DOCUMETNS
10 documents required · 10 mandatory
₹500
GE (AF) SURATGARH
₹20,000
Yes
7 Mar 2023
25 Jan 2023
24 Feb 2023
25 Jan 2023
22 Feb 2023
8 Feb 2023
Amount
BOQ (REPAIR TO ROOFING AND ALLIED WORKS IN ZONE 'B' IN TECH AREA AT AF STATION SURATGARH)
Taking down cement plaster on Brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer in Charge.
Demolition of brick work as in walls/parapet walls removing grass fungus weed, roots of tree completely, grown on roof/wall surfaces, complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement with water proofing compound as per manufacture's instruction, complete all as specified & directed by Engr -in-Charge. Note:- WPC will be measured & paid seperately.
M&L for plastering 5mm thick in cement mortar 1:3 finished even & smooth without using extra cement on ceiling surface, complete all as specified and directed.
M&L for applying two coats of exterior acrylic emulsion (in multi colour pattern shall be approved by GE), in camouflaging patterns after applying a coat of exterior (water based) primer on plastered surfaces including preparation of surfaces, complete all as specified and directed. Note:-(i) Exterior acrylic emulsion & primer shall be applied only through approved authorised applicators by the manufacturers for such works. (ii) Entire quantity of material for this work shall be procured by the contractor from manufacturer's Depot & deposit under charge of Engr-in-Charge and same shall be issued to contractor on daily basis as per consumption at site.
M&L for 3 coat of white washing on ceiling surfaces including preparation of new surfaces complete all as specified & directed by Engr -in-Charge.
Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal to store, complete all as specified and directed by Engineer in Charge.
S&F 16mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed.
S&F 20mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed.
Dismantling water tanks of capacity exc 250 & n.exc 500 ltr and removing to store, complete all as specified and directed.
S & F Rotational moulded polyethylene Triple Layer, white colour water storage tanks (cylindrical vertical with closed top) cap 500 Ltr hoisted and fixed in position, complete all as specified and directed.
S&F, Ball valve of 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) & fixed in repairs , complete all as specified and directed by Engineer-in-Charge.
Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, wsan-necks, etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories, complete all as specified and directed.
S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, of 110mm bore, complete all as specified and directed.
S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, of 75mm bore, complete all as specified and directed.
S& F as in repair PVC (SWR) bend with access door of any radius of 110mm bore, complete all as specified and directed.
S& F as in repair PVC (SWR) bend with access door of any radius of 75mm bore, complete all as specified and directed.
Dismantling bricks tiles or tarracing tiles, single layer on roof, complete all as specifed and directed.
Demolition of mud in roofs any thickness including plastering and leeping (whether full thicknes removed or only a part there of), complete all as specified and directed.
M&L for wire brushing neat cement slurry with 3kg of cement per Sqm at top and bottom of base coat and cleaning top surfaces, compete all as specified and directed.
M&L for PCC padding average 50mm thick to be provided in slope PCC 1:2:4 type B-1 (using 20mm graded aggregate stone), complete all as specified and directed.
M&L for water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of cleaning of concrete or plaster surface of roof and applying evenly a bitumen primer conforming to IS 3488@ 0.30Kg per sqm followed by a tack coat @ 1.2Kg per sqm using 85/25 grade industrial hot blown bitumen over it laid with APP modified polymeric water proofing membrane minimum weight 3.0Kg per Sqm reinforced with non woven polyester fabric (Weight not less than 160 gm per sqm) unrolled & bonded to substrate with longitudinal and end laps 100mm as per manufacturer's instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.2Kg sqm and as per manufacturer instruction and including taking the APP membrane will be required where the parapet wall exceed 45cm for carrying over and taking into parapet wall, cut out neatly a horizontal groove roof surface and groove shall be finished smooth with cement mortar 1:4 with WPC @3% by weight of cement where the parapet wall height is 45cm or less no groove will be required as the water proofing treatment will be carried over the top of parapet wall to its full thickness, complete all as specified and directed.
M&L for 40mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar (1:3) mixed with 5%of crude oil by weight of cement , complete all as specifed and directed.
M&L for 40mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar (1:3) mixed with 5%of crude oil by weight of cement (except tiles), complete all as specifed and directed. Note:- Serviceable tiles obtained from item No- 19.00 shall be reused.
M&L for flush pointing to brick laid flat or brick tiles in paving cement mortar in 1:3, complete all as specified and directed.
M&L for repairing RCC projection chajjas, roof, facia etc by necessary preparation, scraping, cutting, chiseling derusting and cleaning exposed reinforcement surfaces of damaged, loose RCC surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2Kg per Sqm but n.exc 3Kg/sqm (if required) with or without facia and finished with cement mortar 1:3 using coarse sand and work in patches area n.exc 5 Sqm and thickness RCC member n.exc 70mm including necessary formwork and applying two coats of finishes to match with the existing surfaces at any height, complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate ) cement concrete in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.
Dismantling asbestos cement (corrugated or semi coruugated etc.) sheet in roof covering, complete all as specified and directed.
S&F mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel, tubular or flat sectons), including distance pieces, cleats etc (Fe-410-W(Gde E-250) Quality-A, complete all as specified and directed.
S&F rolled mild steel work as in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and like including caps bases, splices etc built up from two or more beam or channel sections or angles with plates or pipe section including all lattice bars, stiffeners, gusset plates etc (Fe-410-W (Gde Ee-250) Quality-A, complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping serews, complete all as specified and directed.
M&L for applying two coats of Tepecrete/pedicrete/nitcobond/roof seal or equivalent water proofing chemical on exposed surface of roof as per manufacturers insturctions, complete all as specified and directed by Engr-in-Charge.
Supply only integral water proofing compound, complete all as specified and directed.
Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.
M/s JUGAL KISHORE MISHRA AND SONS
Bhawani Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .