Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹18.9 LAccepted-AOC | 1 | Accepted-AOC Lowest Tenderer | |
| 2 | 2₹19.0 L+₹3,737 (0.20%)Rejected-AOC | 2 | Rejected-AOC . |
Tender Value
₹20.5 L
EMD Value
₹20,500
Closing Date
11 Feb 2021, 3:00 pmClosed
Project Director
DRDA, Theni
1.Construction of Paver Block road in VOC street at Silvarpatti in Periyakulam Block 2.Construction of mini Community hall at Nadupatti in Bomminaickanpatti at Periyakulam Block
2021_RDTN_193801_1
2990/2019/D5 Dated 02.02.2021
Open Tender
Civil Works
Item Rate
180 days
Theni
As per tender document
3 documents required · 3 mandatory
₹0
₹20,500
21 Jun 2021
4 Feb 2021
11 Feb 2021
4 Feb 2021
11 Feb 2021
4 Feb 2021
Amount
Providing paver block in VOC street in Silvarpatti Panchayat
Earth work execavation abd depositing on bank with in intial lead of 10 mts and lift of 2 mts in narrow trenches for laying the pipes in all kinds of soils as directed by the departmental officers
Cement Concrete 1:4:8 Using 40 mm HBG metal for basement and flooring layers not more than 15cm thick including cost and conveyance of materials to site and all other labour charges including consolidation as per standard specification.
Centering and shuttering charges for side wall side works including cost and conveyance of all labour charges
Cement Concrete 1:3:6 Using 20 mm HBG metal for basement and flooring layers not more than 15cm thick including cost and conveyance of materials to site and all other labour charges including consolidation as per standard specification.
Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% respectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .
Supplying and laying of 60mm thick high strength type of inter locking pavement block in required shap in CM 1:1.2 using 10 -12mm size HBG stone jelly including cost of centering shuttering laying vibrating ( Mechanical vibrating) finishing, curing land the cost including transporting charges etc., complete.
plastering in CM 1:5 Mix12mm Thick including all other labour charges etc complete
Construction of mini community hall at Nadupatti in Bomminaickanaptty Panchayat
Earth work execavation abd depositing on bank with in intial lead of 10 mts and lift of 2 mts in narrow trenches for laying the pipes in all kinds of soils as directed by the departmental officers
Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,
Cement Concrete 1:4:8 Using 40 mm HBG metal for basement and flooring layers not more than 15cm thick including cost and conveyance of materials to site and all other labour charges including consolidation as per standard specification.
Brick work in Cement Mortar 1:5 (one cement and five sand ) using Country Bricks ground molded of size 22x11x7 cm. Including cost and conveyance of materials to site and all other labour charges as per standard specification.
Centering and shuttering charges for side wall side works including cost and conveyance of all labour charges
Supplying Fabricating and placing in position of HSD steel rods for reinforcement including the cost of steel and binding wire etc, complete as per standard specification.
Reinforced Cement concrete1:1.5:3 mix by using 20mm HBG metal including all other labourcharges etc complete
Plastering in CEMENT MORTAR 1:3 10mm thick in Including cost and conveyance of materials to site and all other labour charges including etc., as per standard specification.
Paving the floor with scratch proof Ceramic Tiles of any colour and any size laid in cement mortar 1:2 (one cement and two sand) 20mm thick and pointing with white cement using 0.4Kg/Sq.m. mixed with colouring pigments to suit the colour of the tiles including finishing the joints neatly complying with standard specification and as directed by departmental officers.
Weathering course concrete using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) over the RCC roof slab in the proportion being brickjelly to lime 32:12:1/2 by volume and laid over in to a single layer and consolidated to the required design and finished thickness beating type concrete with wooded beaters keeping the surface constantly welted by sprinkling lime jaggery water as per standard specification etc., complete as directed by the departmental officers.
Finishing the top of roof with one course of Machine Pressed Tiles of size 20 cm x 20 cm x 2cm of approved quality laid in CEMENT MORTAR 1:3 (one cement and three sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, red oxide, etc., complete complying with standard specification.
Plastering in CEMENT MORTAR 1:5 12mm thick in Including cost and conveyance of materials to site and all other labour charges including etc., as per standard specification.
Painting two coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc. complete - 10 Sqm. SI 359
Painting two coat of Plastic emulsion paint over wall plastering surface with best approved first quality of approved colour over the one coat of priming etc., complete complying with standard specification (The paint should be got approved by the departmental officers before use on works )
Painting TWO coat of enamal paint new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved first quality of synthetic enamel paint of approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying with standard specification. (The paint should be got approved by the departmental officers before use on works)
Supply and fabrication of the steel doors, window, ventilatros including cost and conveyacne and all charges etc.,
Steel door size 1.80 x 2.10m
Steel window 1.20 x 1.30m
Toilet door 0.75 x 1.80m
Labour charges for fixing steel doors, window, ventilatros including cost and conveyacne and all charges etc.,
Steel door size 1.80 x 2.10m
Steel window 1.20 x 1.30m
Electrical items
Light point
Supplying & fixing of tube light
Fan point
Fan fittings
Plug point
7/20 Service wire
16Amps main swith with wooden board
Supply and rund of 2 x15 Sq.mm (22/0.30) PVC insulated SC unsheathed copper conductor of 1100v grade in 25mm ida GI pipe (Class-B) suitably bend at both ends with necessary
Provision for rain water harvesting pipe 110mm PVC pipe
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
K. KONDASAMY
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .