Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.6 LAccepted-AOC | L1 | Accepted-AOC Lowest tenderer | |
| 2 | L2₹33.6 L+₹2.9 L (9.53%)Rejected-Finance | L2 | Rejected-Finance Other than lowest quoted tenderer | |
| 3 | L3₹34.5 L+₹3.8 L (12.4%)Rejected-Finance 2 LOCKHART ROAD NEAR PCDA P OFFICE PRAYAGRAJ U P PIN 211014 | PRAYAGRAJ | UTTAR PRADESH | 211014 | L3 | Rejected-Finance Other than lowest quoted tenderer |
Tender Value
₹39.2 L
EMD Value
₹78,380
Closing Date
20 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Prayagraj
HQ CWE New Cantt Prayagraj
SPECIAL REPAIR TO DRAIN FROM MP LINE TO SATA BTY AND ADDN/ALTN TO BLDG NO. T-02 ON AKBAR ROAD AT NEW CANTT UNDER GE (WEST) PRAYAGRAJ.
2024_MES_647737_1
81849/W/E8
Open Tender
Civil Works
Item Rate
180 days
Prayagraj
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (West) Prayagraj
₹78,380
Yes
15 Jun 2024
23 Mar 2024
27 Apr 2024
24 Mar 2024
20 Apr 2024
6 Apr 2024
Amount
Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for old size Brick work with Sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed
M&L for old size Brick work with Sub class 'B' bricks, straight or curved on plan exc 6 m mean radius (Except Bricks), built in CM 1:6 complete all as specified and directed
M&L for 15mm thick rendering in CM 1:4 on other than faces of brick work or stone masonery surface complete all as specified and directed
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed
M&L for cement concrete type B1 1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.
De-silting / cleaning of drain bed from grass/ loose earth / roots etc complete all as specified and directed
Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose complete all as specified and directed
M&L for cement concrete Type C-2, 1:3:6 (40 mm graded stone crushed aggregate) as in surface channel & drains, complete all as specified and directed.
M&L Fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed
M&L Fair finished drain or channel (Exceeding 30cm) inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed
Returning filling in ,including spreading ,levelling,watering and well ramming in layers n exc 25 cm soft/ loose soil complete all as specified and as directed.
Removing excavated material to a distance exc 250mtr & n exc. 500m and depositing where directed at a level n exc. 1.5 Km above the starting point complete all as specified and directed
M&L Providing precast cement concrete in landings, perforated cover slabs (for man holes etc.) Type B1 1:2:4 (20 mm graded crushed stone aggregate) complete all as specified and directed
Mild steel TMT bars 10 mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete complete all as specified and directed
Mild steel TMT bars 5 to 10 mm dia as in Stirups for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed
Surface excavation nexc 30 cm deep and averaging 15 cm deep in soft/loose soil complete all as specified and directed.
M&L for Plain Cement Concrete (1:4:8) type D-2, using 40 mm graded stone crushed aggregate as in foundation, filling and mass concrete complete all as specified and directed.
M&L for RCC M-25 20mm graded crushed stone agg as in Chajja filling complete all as specified and directed. (Note :- Reinforcement to be measured and paid separately).
M&L for RCC M-25 20mm graded crushed stone aggregate as beams, cantilevers, bressumers, lintel over 1.5mtr span complete all as specified and directed.
M&L for RCC M-25 using 20mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams and mass concrete, complete all as specified and directed. (Note :- Reinforcement to be measured and paid separately).
M&L for RCC M-25 20mm graded crushed stone aggregate as in Column, pillars, piers, posts and struts, complete all as specified and directed. (Note :- Reinforcement to be measured and paid separately).
M&L for RCC M-25 (20mm graded crushed stone aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed (Note :- Reinforcement to be measured and paid separately).
M&Lfor RCC M-25 (20mm graded stone crushed aggregate) on Domes, vaults, shell roofs,arch ribs and folded plates complete all as specified and directed. (Note :- Reinforcement to be measured and paid separately).
M&L for Formwork to sides and soffits of floor or roof beams, girders,basements, lintels etc for rough finished surfaces of concrete complete all as specified and directed.
M&L for Formwork to Soffit of roof slab and similar works n.exc 200mm thick horizental or sloping for rough finished surfaces of concrete complete all as specified and directed.
M&L for Formwork to sides of concrete foundations, footings, raft and raft beam side & soffit of foundation and plinth beam for rough finished surfaces of concrete complete all as specified and directed.
M&L for Formwork to sides of pillars, posts, struts, piers columns for rough finished surfaces of concrete, complete all as specified and directed.
M&L for Formwork to including edges for chajja incl rough finished surfaces of concrete complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for Brick work with fly ash old size bricks, straight or curved on plan to any radius in built in cement mortar 1:6 complete all as specified and directed.
M&L for Brick work ( Except brick) with fly ash old size bricks, straight or curved on plan to any radius in built in cement mortar 1:6 complete all as specified and directed.
M&L fo 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 , surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 15 mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or stone surfaces on wall finished even & smooth without using extra cement complete all as specified and directed.
M&L for preparing newly plastered surfaces of wall and applying two coats of exterior emulsion paint (Apex/Weather coat) white or tinted as approved complete all as specified and directed.
Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed.
M&L for Preparing newly plastered surfaces of walls & applying 1mm thick white cement based wall care putty and applying two coat of plastic emulsion paint on wall surfaces complete all as specified and directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for 40mm thick plain Cement concrete type B-1,1:2:4 (20mm graded crushed stone aggregate) as in floor/path/hard standing complete all as specified and directed.
M&L for 100 mm thick PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.
M&L for Marble work Makrana White (table rubbed and polished) for wall lining (veneering to wall) 25mm thick fixed in 10mm thick cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade Complete all as specified and directed.
M&L for Marble work Makrana White18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like laid/fixed in 10mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed .
S&F for 16-18mm thick sand stone wall cladding gang saw cut with machine cut edge, uniform colour of each stone sie excedding 0.50 Sqm area fixed with & including one number SS clamp (grade-202) of flat- 30mm x 2mm, 150mm long made to shape in each slab, making V groove at top & bottom of stone & drilling hole for hold fastener, polishing, rubbing & including silicon treatment with 15mm thick backing plaster in CM 1:3 complete all as specified and directed
S&F glazed ceramic tiles, coloured First/superior quality 300x450 6 to 7mm thick (Digital tiles), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in vertical surface including 10mm thick rendering in CM 1:4 complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.
M&L for framed work as in doors or ornamental gates, of angle or other section with gusset plates, rails, braces etc complete drilling for fixing of steel sheeting or other covering or slidding with including either hooks and hings or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and gudes) and ganging also fashting and complete with ornamental design Fe-290, grade E-165 also complete all as specified and directed.
Fixing only for mild steel works (as obtained from item No.45.00 here in before) as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, embeding in concrete etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., complete all as specified and directed.
M&L for two coat of synthetic enamel paint over a coat of red oxide primer incl preparation of steel surface complete all as specified and directed.
M&L for Preparing newly plastered surfaces of walls and applying two coat of Oil Bound distemper on wall surfaces over one coat of primer complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet reinforced with MS tube in opening as per specification and shown in drg in SSR Part -II 2010 complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F 100 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed
S&F aluminium bow handle,cast type,anodised 100mm long complete fixed with steel screws complete all as specified and directed.
S&F Aluminium sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with & including a min of 6 bolts & nuts four on bolt plate & two on staple plate & fixed 250 mm long complete all as specified and directed.
S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
Dimantling water tanks exc 250 ltrs & n.exc 500 litrs and removing to store complete all as specified and directed.
S&F rotational moulded,multilayer HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
S&F 20mm bore dia ball PTMT valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap complete all as specified and directed.
S&F Plastic water closet seat cover white closed pattern with flat bottom and cover with MS Chromium plated hinge twice ISI marked as approved complete all as specified and directed.
S&F in repair vitreous china urinal, half stall type (flat back), of size 635x395x420mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, complete all as specified and directed.
S&F 15mm dia health faucet ABS body with 08mm dia , 01 mtr long flexible tube & wall hook complete all as specified and directed.
S&F CP toilet paper holder fixed to walls with chromium plated brass screws complete all as specified and directed.
S&F GI tubing medium grade 15mm dia with all fittings, cutting, threading and fixing to walls or fixing in concealed walls or in floors etc. and making good the surfaces matching to existing surfaces of walls/floor complete all as specified and directed.
S&F GI tubing medium grade 20mm dia with all fittings, cutting, threading and fixing to walls or fixing in concealed walls or in floors etc. and making good the surfaces matching to existing surfaces of walls/floor complete all as specified and directed.
S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15 mm bore complete all as specified and directed.
S&F 15mm bore angle valve CP wall with half turn flange, brass chromium plated fancy type complete all as specified and directed.
S&F 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32mm dia PVC pipe 600 mm long complete all as specified and directed.
S&F PVC connection 450mm long and15 mm dia with brass fly nut at both ends complete all as specified and directed.
S&F 15mm bore, bib taps, fancy type cast copper alloy Chromium plated screwed down for iron pipe for brass ferrule and fixed complete all as specified and directed.
S&F vitreous china counter top wash basin, white, oval shape of size 600x400x185mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.
S&F center hole basin mixer without pupup waste system with 450mm braided hose, brass chromium plated, fancy type with all accessories and fixed complete all as specified and directed. Make : Jaquar or equivalent in Cera/ Parryware
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 10mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
S&F Tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges complete all as specified and directed.
S&F PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, laid in tranches or in floors complete all as specified and directed.
S&F PVC (SWR) 110mm bore bend, any radius complete all as specified and directed.
PVC (SWR) junction single (single T), equal or unequal, 110 mm bore, provided with access door complete all as specified and directed.
M&L for joint free non skid, ceramic “coloured” tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&L for Glazed ceramic coloured tiles 7 to 8mm thick area of tile exceeding 0.13 and n.exc 0.18 Sqm in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof covering complete all as specified and directed.
Refixing for Pre- painted galvatume aluminum as obtained from item No 82.00 above as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L in replacment of two single core (submain) FRLS PVC insulated & unsheathed copper cable and one single core green FRLS PVC insulated copper conductor earth continuity cable of size 4.00 Sqmm is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as directed. Note :- (i) The cost for cutting, chases required shall deemed to be included in the quoted unit rate. (ii) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one unit length.
M&L for point wiring with 1.5 sqmm PVC insulated unsheathed FRLS cable with multistaranded copper conductor medium grade ISI marked PVC concealed conduit with all accessories including necessary chases cutting on wall for one light/fan point controlled by one switch with 1.25mm MS terminal boxes concealed on wall duly anodized and including 3mm thick laminated sheet including 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor continuous earth wire connected to common earth and dolly complete all as specified comprision as under:- (Note- Rate for cutting chases and make of good shall be included in rate to be quoted against same item)
One light point / Fan controlled by one way switch complete all as specified and directed.
One 3 pin socket outlet 5 Amp on independent board complete all as specified and directed.
S&F Switch Piano type single pole 5 Amps one way complete all as specified and directed.
S&F Socket outlet 2 in 1 , 3 pin flush type single pole 6 Amps complete all as specified and directed.
S&F LED light fitting with Decorative ulta slim linear LED lighting fixture with co extruded polycarbonate body environnmental friendly , energy efficient tube light complete with all accessories internally pre-wired and including LED lamp 20 watt 01 No and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F LED 10 W bulk head fitting with high output with opal diffuser 230 V AC decorative type with driver holder and LED lamp including connecting with three core flrxible copper conductor cable of suitable size complete all as specified and directed.
S&F flush type sheet metal enclosures double door type for MCB DB 4 Way SPN, 240V with 200 Amp rated bus bar complete all as specified and directed.
S&F MCB single pole 6 to 32 Amp amp, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F MCB single pole & neutral 32 amp, 240 volts, 'C' series, 10 KA breaking capacity & connection in DB complete all as specified and directed.
M/S JAI DURGA CONSTRUCTION
Jahanvi enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .