REPAIR AND MAINTENANCE TO CEILING FAN, EXHAUST FAN, WALL MOUNTED FAN, PEDESTAL FAN, TABLE FAN, AIR CRCULATORS AND OTHER CONNECTED E/M WORKS AT AFS MOHANBARI UNDER GE (AF) MOHANBARI.

Amount

Supply and fix in repairs exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm including taking down old one Complete all as specified and as directed by the Engineer- in- Charge

All as per item No.01 above but for 250 mm

Supply and fixing in repairs stepped type electronic fan regulator for ceiling fan complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs Modular stepped type electronic fan regulator 120W-2 module for ceiling fan complete all as specified and as directed by the Engineer-in-Charge.

Taking down and refixing after repairs Ceiling fans of any make/ model and sweep in its original position, connecting and testing, including provision of cable from ceiling rose/connector to fan complete all as specified and as directed by the Engineer-in-charge.

Taking down and refixing after repairs Exhaust fans of any make/ model and sweep in its original position, connecting and testing, including provision of cable from ceiling rose/connector to fan complete all as specified and as directed by the Engineer-in-charge.

Taking down and refixing after repairs Wall mounted fans of any make/ model and sweep in its original position, connecting and testing complete all as specified and as directed by the Engineer-in-charge.

Taking down and refixing after repairs Pedestal fans of any make/ model and sweep in its original position, connecting and testing complete all as specified and as directed by the Engineer-in-charge.

Taking down and refixing after repairs Table fans of any make/ model and sweep in its original position, connecting and testing complete all as specified and as directed by the Engineer-in-charge.

Taking down and refixing after repairs Air circulator fans of any make/ model and sweep in its original position, connecting and testing complete all as specified and as directed by the Engineer-in-charge. Note for Item Nos.5 to 10:- Bearing/gun metal bush/rubber bush & bolts/ capacitor/rewinding//shaft etc. will be measured and paid separately.

M&L for Rewinding of ceiling fan upto 1400mm sweep of any make/model, including removal of existing burnt windings completely carefully from the slots, cleaning the slots thoroughly with necessary cleaning agent, applying slot insulation and rewinding with super enameled copper wire of existing guage complete all as specified and as directed by the Engineer-in-Charge. Note:- (Rate is inclusive of Transportation to and fro from MES Store e to Workshop in Tinsukhia/ Dibrugarh)

All as per item No.11 above but Exhaust fans up to 300 mm sweep.

All as per item No.11 above but Exhaust fans from 300 mm up to 450mm sweep.

All as per item No.11 above but Wall mounted fans up to 450 mm sweep.

All as per item No.11 above but Pedestal fans up to 450 mm sweep.

All as per item No.11 above but Table fans up to 450 mm sweep.

All as per item No.11 above but Air circulator fans up to 450 mm sweep.

M&L for cleaning/preparation of surfaces of ceiling fan up to 1400 mm sweep thoroughly and painting with one coat of spray painting using synthetic enamel white paint over the existing paint and stenciling of MES No. with black paint over it complete all as specified and as directed by the Engineer-in-Charge. Note:- (Rate is inclusive of filling of cavities with filler and matching to existing finishing of fans)

All as per item No.18 above but Exhaust fans up to 300 mm sweep

.All as per item No.18 above but Exhaust fans from 300 mm to 450 mm sweep.

All as per item No.18 above but Wall mounted fans up to 450 mm sweep.

All as per item No.18 above but Pedestal fans up to 450 mm sweep.

All as per item No.18 above but Table fans up to 450 mm sweep.

All as per item No.18 above but Air circulator fans up to 450 mm sweep.

Supply and fixing in repairs of ball bearings, bearing No.6201 suitable for Ceiling fans/Wall mounted fans/Exhaust fans/Air circulator fans/Table fans of any sweep any make/model complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.25 above but bearing No.6202.

All as per item No.25 above but bearing No.6203.

All as per item No.25 above but bearing No.6204.

All as per item No.25 above but bearing No.6205

Supply and fixing in repairs Oil type capacitor of 2.5 Mfd suitable for Ceiling fans/Wall mounted fans/Exhaust fans/Air circulator fans/Table fans complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.30 above but 4.0 Mfd.

Supply and fixing in repairs gun metal bush suitable for Ceiling fans/Wall mounted fans/Exhaust fans/Air circulator fans/Table fans of any sweep and of any make & model complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs rubber bush with bolt and nut suitable for Ceiling fans/Wall mounted fans/Exhaust fans/Air circulator fans/Table fans of any make/model/sweep complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs Split Pin and Jam nut suitable for Ceiling fans/Wall mounted fans/Exhaust fans/Air circulator fans/Table fans of any make/model/sweep complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs MS down rod 15 mm bore and 450 mm long including two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs shaft suitable for ceiling fan/exhaust fan/air circulator of any make/model and sweep with necessary machining work complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs the canopy suitable for ceiling fan of existing type & size complete all as specified and as directed by the Engineer-in-Charge.

Supply and Fixing in repairs MS Clamp made of Flat Iron size 25 X 6 mm including nuts,bolts and 'S' hook. complete all as specified and as directed by the Engineer-in-Charge.

Material and Labour for tubes 'Medium Grade' Galavanised Iron Pipe of size 50 mm bore in short lenghts, with all fittings and fixed complete between walls for hanging of Ceilings fans etc including taking down old unserviceable one Complete all as specified and as directed by the Engineer- in- Charge

M/S D G ENTERPRISE

FREEZCON

R K CHAKRABORTY AND CO

D N ENTERPRISE

KP GHOSH AND CO