ADDN ALTN TO BLDG NO T 223 AND T 224 OF OFFRS INSTITUTE AND SPECIAL REPAIR TO BLDG NO T 287 AT SI LINES UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

S&F of 4mm thick non asbestos fibre cement building boards shop painted ivory / white of size 595mm x 595mm square fixed or laid/ inserted to GI framework with screws complete all as specified and directed.

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions in different levels with and including filling joints with plaster of paris and applying twocoats of oil bound distemper complete all as specified and directed.

S&F of Gl frame work for seamless flase ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F of second class hard wood moulding as in cornices, picture rails and the like fixed to wall/ceiling, mirror, window etc. of sectional area not exc 6 sqcm complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Fixing only rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors tank stage and fencing post etc fixed with angle cleats or other connecting plates Fe-290 (Gde E-165) complete all as specified and directed. Note: Old steel sections retrieved shall be re-used.

S&F of mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors tank stage and fencing post etc fixed with angle cleats or other connecting plates Fe-290 (Gde E165) complete all as specified and directed.

S&F of mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for preparation of newly steel surface of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F of pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (AZ-150) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S &F of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick (AZ-150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F of 2mm thick fibre glass reinforced translucent corrugated / plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in concrete/ brick walls etc. complete all as specified and directed.

M&L for cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore, etc. to store and rubbish not exc. 50m complete all as specified and directed.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove by using wire netting of galvenised steel wire with cement mortar 1:3 complete all as specified and directed . Note :- Galvenised steel wire netting shall be measured and paid under relevant items.

S&F of galvenised steel wiremesh of mesh size 12mm and of 1.40mm nominal dia of wire and fixed with tinned tacks or galvenised wire staples complete all as specified and directed.

M&L for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in cement mortar 1:4, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc; complete all as specified and directed.

Demolition of stone work built in cement mortar including all quoins, arches, pillars, etc; complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc; laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, below or above ground level complete all as specified and directed.

Demolition of plain cement concrete in ground floor and pavings n. exc. 15cm thickness below or above ground level complete all as specified and directed.

M&L for brick work with flyash bricks, straight or curved on plan exc. 6m mean redius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with flyash bricks, straight or curved on plan exc. 6m mean redius built in cement mortar 1:4 complete all as specified and directed.

M&L for stone walling of random rubble, uncoursed well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed.

M&L for providing precast cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) in louvres and jallies, 25mm thick (measured solid) including all mouldings, frames and set in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including mixing water proofing compound as per manufacturer instructions complete all as specified and directed. Note: WPC shall be measured and paid seperately.

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces finished even and smooth without using extra cement including mixing water proofing compound as per manufacturer instructions complete all as specified and directed. Note: WPC shall be measured and paid seperately.

M&L for rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified and directed

Suppy only Integral waterproofing compound (ISI marked) complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard/ dense of soil complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, manholes, laying of cables, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed.

Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for dry sand filling under floors or in foundations, around cable and similar work including consolidation complete all as specified and directed.

M&L for hard core of broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled / rammed to a true surface complete all as specified and directed.

M&L for RCC (nominal mix) M-25 (using 20 mm graded stone aggregate) in footings, plinth beam, bases for columns, raft etc. complete all as specified and directed.

M&L for RCC (nominal mix) M-25 (uisng 20 mm graded aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC (nominal mix) M-25 (using 20 mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, plinth beams for rough finished flat surfaces complete all as specified and directed.

Use and waste of formwork to sides of square columns for rough finished flat surfaces complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required, including cranking, bending spirally for hooping columns, hooking ends and binding with and including mild steel wire (annealed) not less then 0.9mm dia complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less then 0.9mm dia complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping columns, hooking ends and binding with and including mild steel wire (annealed) not less then 0.9mm dia complete all as specified and directed.

M&L for PCC 1:4:8 type B-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base for floors and similar work, finshed even and rough complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in sub base for floors and similar work, finshed even and rough complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for light shed vitrified ceramic tiles, double charged, 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 10 mm thick providing backing coat in cement mortar 1:4, finished even and rough complete all as specified and directed.

M&L for light shed vitrified ceramic tiles, double charged, 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36sqm but not exceeding 0.42 sqm, in dado/ skirting / vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 20mm thick granite stone (of any type) tiles, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and incluidng 15mm thick screed bed in cement mortar 1:6 including grinding and polishing complete all as specified and directed.

M&L for 20mm thick granite stone (of any type) tiles, machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 10mm thick backing coat in cement mortar 1:4 including grinding and polishing complete all as specified and directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for providing, plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) in coping, edge concrete to interlocking paver block, ramp concrete and similar work complete all as specified and directed

M&L for glazed coloured ceramic tiles on vertical surfaces of size 350x 250/ 450x 350 & 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match in vertical surface skirting/ dados etc complete all as specified and directed.

S&F of 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes complete all as specified and directed.

S&F of heavy weight stainless steel hydraulic patch fittings for single leaf having single bolt and single strock of minimum size 190mm x 70mm x 40mm complete all as specified and directed

S&F of aluminium die cast body heavy duty double cylinder floor door spring with stainless steel (grade-304) cover plate fixed to toughened glass door complete all as specified and directed

S&F of stainless steel heavy duty D-shaped patch lock and strike plate with two set of keys suitable to be operated from both sides and fixed to toughened glass door complete all as specifed and as directed.

S&F of heavy duty stainless steel (grade 304) 'H' shaped handles 300mm long fixed to toughened glass door with one pair of collar and screws complete all as specified and directed.

S&F in repairs 15mm dia Bib taps, brass chromium plated fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm dia medium grade galvanised iron tubing with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) pipes single socketed in any length with rubber rings joints laid in fixed to walls with and including clamps complete all as specified and directed

S&F in repairs 110mm PVC (SWR) pipes single socketed in any length with rubber rings joints laid in fixed to walls with and including clamps complete all as specified and directed

S&F of 110mm PVC (SWR) junction single (single`T') equal or unequal with accessable door inculding cutting out wall /concrete surfaces, finishing surface to match existing surface complete all as specified and directed

S&F of 110mm PVC (SWR) bend including jointing with solvent cement complete all as specified and directed.

S&F of 75mm PVC (SWR) bend including jointing with solvent cement complete all as specified and directed.

Taking down chowkat or frame with shutter without taking off shutter from the frame of area n. exc 1.5 sqm complete all as specified and directed.

Taking down chowkat or frame with shutter without taking off shutter from frame of area exc 1.5 sqm and not exc 4 sqm complete all as specified and directed.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and incluidng MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed to chowkhats complete all as specified and directed.

S&F of 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F of 100mm long aluminium handles, cast type, anodised and fixed with screws complete all as specified and directed.

S&F of 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed with screws complete all as specified and directed.

S&F of 100mm butt hinges cold rolled mild steel and fixed with screws complete all as specified and directed.

S&F of powder coated anodised aluminium frames for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and directed.

S&F of anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.), suitable handle (1 No.) in one shutter complete all as specified and directed.

S&F of powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed.

S&F of 4.8 mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and fixed to aluminium frame complete all as specified and directed.

S&F of 4.8 mm sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane and fixed to aluminium frame complete all as specified and directed.

S&F of stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs light colour vitreous china WHB table top type of size 700 x 435 x 135mm (minimum) excluding taps complete all as specified and directed. Make: Jaquar Cat part No. ARS-WHT-39903 or equivalent in Cera/ Hindware as approved by GE.

S&F in repairs white vitreous china extended wall hung WC of bowl size 350 x 360 x 575mm including white soft close seat cover and fixed to wall with white cement to match with colour of tiles complete all as specified and directed. Make: Jaquar Cat part No. ARS-WHT-0110 or equivalent in Cera/ Hindware as approved by GE.

S&F in repairs concealed cistern body single piece slim in-wall cistern with wall mounting frame, installation kit including syphonic mechanism complete all as specified and directed. Make: Jaquar Cat part No. CIB-WHT-31801011X or equivalent in Cera/ Hindware as approved by GE.

S&F of control plate to concealed flushing cistern complete all as specified and directed. Make: Jaquar Cat part No. CIS CHR 31171019 or equivalent in Cera/ Hindware as approved by GE.

S&F in repairs angular stop cock with wall flange, brass, chromium plated, fancy type, screwed for 15 mm bore iron pipe or union complete all as specified and directed. Make: Jaquar Cat part No. FUS-CHR-29053 or equivalent in Cera/ Hindware as approved by GE.

S&F of brass chromium plated waste coupling 32 mm size full thread with 130 mm height complete all as specified and directed. Make: Jaquar Cat part No. ALD-CHR-705 or equivalent in Cera/ Hindware as approved by GE.

S&F of brass chromium plated bottle trap complete all as specified and directed. Make: Jaquar Cat part No. ALD-CHR-769L or equivalent in Cera/ Hindware as approved by GE.

S&F of soap dispenser with metallic bottle complete all as specified and directed. Make: Jaquar Cat part No. ACN-1137N or equivalent in Cera/ Hindware as approved by GE.

S&F of soap dish holder complete all as specified and directed. Make: Jaquar Cat part No. AQN-CHR-7731 or equivalent in Cera/ Hindware as approved by GE.

S&F of corner glass shelf with brackets complete all as specified and directed. Make: Jaquar Cat part No. ACN-1173 or equivalent in Cera/ Hindware as approved by GE.

S&F of tumbler holder complete all as specified and directed. Make: Jaquar Cat part No. AQN-CHR-7741 or equivalent in Cera/ Hindware as approved by GE.

S&F in repairs stainless steel grating 125 mm dia with or without hole complete all as specified and directed.

S&F in repairs single lever wash hand basin mixer complete all as specified and directed. Make: Jaquar Cat part No. ORP-10051BPM or equivalent in Cera/ Hindware as approved by GE.

S&F in repairs PVC connection 15 mm size with brass nuts of length 600mm complete all as specified and directed.

S&F in repairs towel rack chromium plated brass of size not less 60 cm long complete all as specified and directed. Make: Jaquar Cat part No. AQN-7781 or equivalent in Cera/ Hindware as approved by GE.

S&F in repairs brass stainless steeel towel ring round complete all as specified and directed. Make: Jaquar Cat part No. AQN-7721 or equivalent in Cera/ Hindware as approved by GE.

S&F in repairs over head shower complete all as specified and directed. Make: Jaquar Cat part No. OHS-CHR-1989 or equivalent in Cera/ Hindware as approved by GE.

S&F in repairs wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange (without hand & overhead shower) complete all as specified and directed. Make: Jaquar Cat part No. FUS-CHR-29281 or equivalent in Cera/ Hindware as approved by GE.

S&F in repairs hand shower, multifunction 95mm round shape hand shower with normal, soft & massage spray complete all as specified and directed. Make: Jaquar Cat part No. HSH-CHR-1739 or equivalent in Cera/ Hindware as approved by GE.

S&F of shower tube easy flex tube in chrome finish 1.5M long with nuts complete all as specified and directed. Make: Jaquar Cat part No. SHA-CHR-571 or equivalent in Cera/ Hindware as approved by GE.

S&F of swivel mirror round complete all as specified and directed. Make: Jaquar Cat part No. ACN-CHR-1195N or equivalent in Cera/ Hindware as approved by GE.

S&F of glass shelf 600 mm long complete all as specified and directed. Make: Jaquar Cat part No. ACN-CHR-1171N or equivalent in Cera/ Hindware as approved by GE.

Complete removal of old existing treatment of walls by mechnical machines to achieve smooth surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of chalk whitening complete all as specified and directed.

M&L for complete removal of existing treatment of wall surfaces including preparation and applying two coats of oil emulsion distemper over and including a coat of 1mm thick white cement putty complete all as specified and directed.

M&L for preparation and applying waterproof cement based putty @ 0.5 Kg (undiluted) per sq mtr. of average thickness 1.5mm in two coats on prepared wall (Externally / internally) and ceiling surfaces as specified here-in-before in following steps:- Step-1) Filling cracks in wall using crack seal compound Asian smart care crack seal or equivalent. Step 2) Mix the putty powder @ 0.5 kg/sqm by adding 35 to 40% water by volume or as per approved manufacturer's instructions and mix it with electric putty mixer. Step 3) Apply the first coat of the prepared mix in bottom to top configuration. Step 4) Allow 6-8 hrs to dry putty surface. Step-5) Apply the second coat of the prepared mix in horizontal configuration. Step-6) Allow 6-8 hrs to dry putty surface then prepare the surface complete all as specified and directed. Note:- (i) Primer shall be measured and paid saperately under relevant item. (ii) Make :- Berger Homeshield waterproof putty, Asian Truecare acrylic wall putty, Nerolac Perma waterproof putty, Dulux aquatech waterproof putty.

M&L for applying one coat of acrylic water based interior grade primer @ 0.7 ltr (undiluted) /10 Sqm, diluted with water in 1:1 ratio (minimum) or as per approved manufacturer's instructions to be applied on prepared wall (interior) surfaces and allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Make: Asian royale wall base coat primer, Nerolac premium primer, Berger BP white primer complete all as specified and directed.

M&L for applying one coat of acrylic water based Exterior grade primer @ 0.9 ltr (undiluted) /10 sqm, diluted with water in 1:1 ratio (Minimum) as per approved manufacturer's instructions to be applied on prepared wall (External) surfaces and allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Make: Berger HS PU RoofKoat primer, Truecare exterior wall primer, Dulux promise exterior primer, Kansai Nerolac Excel alkali prime primer.

M&L for applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint @ 0.2 ltr (undiluted)/10 sqm, diluted with water in 1:1 ratio (Minimum) of approved tint as per approved manufacturer's instruction over prepared and primed surface of external wall Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed. MAKE:- Berger weathercoat long life 15 emulsion paint / Apex Ultima Protek Duralife / Dulux weathershield Powerflexx paint/Kansai Nerolac Excel Everlast 12

M&L for applying two coats of high-sheen, anti- fungle, anti bacterial, low-VOC & highly washable luxury emulsion paint with @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) or as per manufacturer's instruction taflon surface protector of shade as approved on internal wall surfaces complete all as specified and directed. Make:- Asian (Royale shyne luxury emulsion ) / Kansai Nerolac Impressions white 24 carat premium luxury emulsion paint / Dulux valvet touch Diamond Glo /Berger paint (Silk Glamor Luxury Emulsion)

M&L for preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed.

S&F in repairs 500 Ltrs capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layers, hoisted and fixed in position complete all as specified in SSR Part-I and as directed.

S&F of decorative stainless steel powder coated curtain rod, 25mm dia, minimum wall thickness 2mm curtain rod with 02 Nos powder coated side fixing brackets and SS decorative knobs complete all as specified and directed.

M&L for post anti termite treatment for treating the soil alongwith external perimeter oof building at the rate of 2.25 ltr of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for post anti termite treatment for treating of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

S&F of solar control film 25 micron reflective type sticked to glass panes in area exc. 1.50 Sqm as per instruction of manufacturers complete all as specified and directed.

S&F of 12mm toughned glass as in doors, partition, window or other similar works in approved shape and design with necessary steel fittings and fixtures including 300mm long one stainless steel handles fixed in both sides of door shutter, SS locks fixed with wall/ ceiling/ floors, floors springs of suitable size etc complete all as specified and directed.

Taking down carefully copper/aluminium point wiring concealed/ casing caping (light, fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, call bell and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for concealed point wiring with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories (PVC casing and caping of size 25 mm, ISI marked with complete accessories to be used wherever wiring to be run on ceilings and concrete surfaces) including one run of 1.5 sqmm FRLS multi stranded copper conductor (Green colour cable) as earth continuity wire connected to common earth dolly including modular galvanized sunk sheet steel terminal box concealed in wall for fixing of switches, sockets and fan regulators etc complete all as specified and directed for the followings:-

(a) One light /Fan/Exhaust/bell point controlled by one switch.

(b) One 3 pin socket outlet 5 Amps on independent board.

(c) One 3 pin socket outlet on same board.

All as per item No. 130 here-in-before but wiring with 2.5 Sq mm FRLS multi-stranded copper conductor cable for 5/15 amp switch socket on independent board and with 2 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete.

All as per item No. 130 here-in-before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete.

S&F of modular switch one way 6 Amp one module, 240 volts complete all as specified and directed.

S&F of modular switch one way 16 Amp one module, 240 volts complete all as specified and directed.

S&F of modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, controlled by one switch complete all as specified and directed.

S&F of modular socket outlet 2-in-1, 2/3 pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed.

S&F of white cover plate with frame, 2 module and fixed complete all as specified and directed.

S&F of white cover plate with frame, 4 module and fixed complete all as specified and directed.

S&F of white cover plate with frame, 6 module and fixed complete all as specified and directed.

S&F of sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket with and including one single pole MCB 240 V grade 20/25 Amp and making necessary connections complete all as specified and directed.

S&F of ceiling rose 3 terminals 65x25 mm dia polycarbonate isolated complete all as specified and directed.

S&F of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with and including 10 watt LED bulb cool day light, 230/240V, AC complete all as specified and directed.

S&F of modular fan regulator, step type, two module, 230 V, AC and making necessary connections complete all as specified and directed.

S&F of LED tube light fitting bright, 18 watt, slim elegant design in aluminium housing with and including making connection with 3 core 23/0.0076 insulated copper wire from celing rose to fittting complete all as specified and directed.

S&F of modular bell push 6 Amp one module, 240 volts complete all as specified and directed.

S&F of call bell, Ding Dong type, 230 V, AC, single phase ISI marked and making necessary connections complete all as specified and directed.

S&F in replacement building security light fitting complete with 30 watt LED type pressure die cast aluminium housing and heat resistant toughened glass with frame protection and better optics for uniform distribution complete fixed bracket made out of GI pipe 32 mm dia (light grade) 1.5 metre long and MS clamps, nuts, bolts, washers and making connection with twin core cable 1.5 sqmm from ceiling rose to fittings connector complete all as specified and directed.

Taking down and re-fixing of LED tube light fitting in new or existing position with and including provn of new 3 core 23/0.0076 insulated copper wire connection from celing rose to fittting connector complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 Amps rated busbar, 12 way double door, factory made conforming to IS:13032 fabricated out of CRCA sheet not less than 1.2mm thick fitted with DIN channel, neutral link complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB, DB, TPN, 415 Volts, 200 Amps rated busbar 4 way double door, factory made conforming to IS:13032 fabricated out of CRCA sheet not less than 1.2mm thick fitted with DIN channel, neutral link complete all as specified and directed.

S&F in replacement ON-load changeover switch, rotory type, 100 Amp, 415 Volt, TPN, front operated with sheet metal enclosure suitable for mounting on wall as per site requirement complete all as specified and directed.

S&F of Change over, MCB, DP of capacity 40 Amp, 2 Pole, breaking capacity 10 KA and making electrical connections by appropriate size of copper lugs complete all as specified and directed.

S&F of MCB single pole, 6 to 32 Amps, 240 Volts and making connections complete all as specified and directed.

S&F of MCB double pole, 63 Amps, 240 Volts and making connections complete all as specified and directed.

Supply and fixing MCB, TPN, 40 to 100 Amps, 415 V, 10 KA 'B' curve and making connections incluidng testing complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m deep below normal ground level and connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 metre long all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately.

S&F of LED tube light fitting, two feet long, 10 watt, slim design, 230 volts with and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector complete all as specified and directed.

Taking down/dismantling of storage type hot water Geyser of any capacity from different locations by disconnecting inlet/outlet connections and depositing to E/M store complete all as specified and directed.

Taking down carefully serviceable/unserviceable exhaust fans of any size from its position, and depositing to E/M store complete all as specified and directed.

Taking down carefully ceiling fans of any size from its position and depositing to E/M store complete all as specified and directed.

Taking down carefully 1.5/2 TR ACs any type, of any size from its position and refixing in its existing position properly with and including gas charging, installing and testing for proper cooling complete all as specified and directed.

M&L for sub main wiring with two single core 4 Sqmm multi stranded copper conductor, FRLS, PVC insulated, unsheathed cable with and including rigid non metallic PVC conduit medium grade, ISI marked, 20 mm dia for sub main wiring and 4 sqmm FRLS, PVC insulated and unsheathed stranded copper conductor cable as earth wire in surface/recess and making good to the disturbed surfaces to match the existing surfaces including taking down existing unserviceable sub main of any type and size complete all as specified and directed. Note:- Two runs of 4.0 Sq mm copper conductor cable, one run of 4 Sq mm copper conductor and one run of PVC conduit will be measured as one unit.

M&L for sub main wiring with two single core 6 Sqmm multi stranded copper conductor, FRLS, PVC insulated, unsheathed cable with and including rigid non metallic PVC conduit medium grade, ISI marked, 20 mm dia for sub main wiring and 6 sqmm FRLS, PVC insulated and unsheathed stranded copper conductor cable as earth wire in surface/recess and making good to the disturbed surfaces to match the existing surfaces including taking down existing unserviceable sub main of any type and size complete all as specified and directed. Note:- Two runs of 6.0 Sq mm copper conductor cable, one run of 6 Sq mm copper conductor and one run of PVC conduit will be measured as one unit.

S&F of electronic single phase meters temper proof LCD display with polycarbonate cover, 230 V, 10-60 Amp, accuracy class-I & 50Hz, conforming to IS:13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH including fitted with and including suitable size on wooden board of second class hard wood complete all as specified and directed.

S&F in replacement Warm white in colour LED ultra slim decorative aluminium casted edge ceiling light, recess mounting LED 2 x 2 luminaire, 36 watt with all accessories internally pre-wired with and including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm three core complete all as specified and directed.

S&F of electric water heater, storage type, powder coated steel body with copper inner tank and heating element upto 2 KW capacity, 25 litre, BEE 5 Star rated with and including all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

S&F of exhaust fan, steel body AC single Phase, 230V of 250 mm sweep with blades and frame and steel louvers complete including making suitable size of hole in existing wall for mounting fan and amking good disturbed surfaces in CM 1:3 complete all as specified and directed.

S&F of 1200 mm sweep ceiling fans (BLDC) complete with blades, down rods and connected accessories, 230 V, Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor complete all as specified and directed.

Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed

M&L for providing of un-reinforced precast concrete cable cover class HV, Type 1 size 250 x 150 x 40mm, laid flat dry for protection of under ground cable complete all as specified and directed.

Supply, laying & testing of 1100 Volts grade heavy duty XLPE cable of size 10 Sqmm 4 core, with aluminium conductor stranded polythylene insulated, served with and including sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as specified and directed. Note:- Excavation, earth work, pipe / sand / bricks for cable protection shall be measured and paid for separately under appropriate item.

Supply and laying in ground 32mm bore GI tubing, light grade, galvanized with all fittings for protection LT cable complete all as specified and directed.

Taking out old existing water supply pipe line upto 25mm bore (approx length 20 RM) and re-laying the same in new/ existing position with and including providing new fittings from storage water tank to main supply as per site requirement as specified and directed.

S&F of 20 mm bore GI tubing, medium grade, ISI marked with fittings such as bends, elbows, reducers, laid in floors or fixed to walls complete all as specified and directed.

S&F of 20 mm bore gun metal globe or gate valve, class-2 with iron wheel head, screwed both ends complete all as specfiied and directed.

S&F of presure motor (Booster pump) of capacity 0.5 HP including making all electrical/ water supply connection with suitable size and testing after complete installtion complete all as specified and directed.

Schedule of credit (calculation will be done off line) Rs. 30880.00

AJIT ENTERPRISES (BID ID -3063226)

M/S RAKESH TRADERS (BID ID -3072296)

ROYAL CONSTRUCTION (BID ID -3063163)

SHIV SHANKAR MISHRA (BID ID -3064072)