Repair and Replacement of roof sheet, wall panelling,flooring and other related works at Transit Camp, GE office and Sig Coy under GE Partapur

Amount

Dismantling of plain of corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed by Engr-in-charge.

S&F Galvanised MS sheeting of 0.63 mm thick corrugated ISI Marked and made of shakti with two cougation side laps and fixed with J hookes two framed work with PVC and steel washers as in roof & wall all as spd and as drected by Engr-in-Charge

S&F Plain, Galvanised MS sheeting of 0.63 mm thick in ridge,hips, valley gutters, drip and straight flashing ISI Marked and fixed with J hookes two framed work with PVC and steel washers as in roof & wall all as spd and as drected by Engr-in-Charge

Preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge

Dismantling wall and ceilling board (fibre, pulp, insulation etc) or insulation board/slabs/blanket any thickness including cover fillets.

M&L 6 mm thick veneered decorative plywood, grade 1 ( with BWR resin) with only one side decorative face veneers fixed with nails as in wall panelling, complete all as specified and directed by Engr-in-charge.

M&L 6 mm thick veneered decorative plywood, grade 1 ( with BWR resin) with only one side decorative face veneers fixed with nails as in ceiling works, complete all as specified and directed by Engr-in-charge.

M&L, French polishing on surfaces of any discription, width or girth incl cleaning and preparing the surface incl a coat of wood filler on new works with two coats, complete all as specified and directed by Engr-in-charge.

M/L 19 mm thick, Prelminated particle board, interior grade, prelaminated one side with decorative choice lamination fixed with screws to timber frame works

Dismantling timber framed in fillets,rails, posts rafters,purlines, etc under 40 sq cm in section, complete all as specified and directed by Engr-in-charge.

M&L second class softwood plain fillets,rectangular in section, clean swan, secured with nails exc 13 and n.exc 25, complete all as specified and directed by Engr-in-charge.

M&L second class softwood plain fillets,rectangular in section, clean swan, secured with nails exc 3 and n.exc 6, complete all as specified and directed by Engr-in-charge.

Demolition of brick work/ block masonry work built in cement mortar complete all as specified

Material & Labour for precast cement concrete block masonry 1:3:6 type C-I with solid block exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

Material & Labour for precast cement concrete block masonry 1:3:6 type C-I with solid block 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

Taking down cement plaster on brick or concrete stone walls etc incl racking out joints hacking for key scrubbing down with water etc.

M&L for 15mm thick rendering on fair faces block masonry walls in cm (1:6) with finished the surface fair and even.

M&L for 15mm thick cement plastering on fair faces block masonry walls in cm (1:4) with finished the surface fair and even.

M&L preparation of new plastered surfaces of walls. Priming plastered and other surfaces with alkali resistant priming paint and applying two coat of cement base paint complete all as specified.

Applying two coats of oil bond distemper over a coat of primer on walls, pillasters on newly plastered surface complete all as specified

Material & labour for preparation of new plastered surfaces & applying three coat of white wash on walls

Dismantling floor hearth or wall tiling including cement mortor bedding but not backing, removing serviceable tiles to stores and rubbish off premises, complete all as specified and as directed.

M&L, Rendering 10 mm thick cement plaster in CM 1:4 as a backing coat for laying wall tiles complete all as specified and directed by Engr-in-charge.

M&L, glazed ceramic coloured tiles in vertical surface 300 X 200 X 7 mm thick set and jointed in neat cement slurry and pointed in white or couloured cement to match, complete all as specified and directed by Engr-in-charge.

M&L 15 mm thick screed bed or bedding layer of cement mortar for laying floor finish in CM 1:6

M&L non skid coloured ceramic tile 7 to 8 mm thick (square/rectangular) are of each tile exc 0.11 Sqm but not exc 0.18Sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L vitrified ceramic tiles 10mm thick (square/rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement to match incl over 20mm thick CM 1:6 screed bad for laying floor all as specified and directed.

Ditto but on vertical surface as in dados/skirting over 15mm thick backing coat in CM 1:4 all as specified and directed.

Supply and fixing in repair laminated wooden flooring in size 1227mm x 197mm x 8mm thick, including skirting, floor breakers etc complete all as sper manufacturers instruction with a layer of foam backing complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor and paving n. exc. 15cm thick (below or above ground level) complete all as specified and as directed.

M & L PCC 1:2:4 type B-2, 100 mm thick using 40 mm graded stone aggregate as in floor and pavings.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in plinth protection/pavment and the like, finish the surfaces even and fair without using extra cement all as directed and specified

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, 50mm thick as in sub base cemplete all as directed and specified

Taking down chowkhat or door frames including shutters n exc 1.5 sqm each complete all as specified

Taking down chowkhat or door frames including shutters exc 1.5 sqm n exc 4 sqm each complete

Taking down shutters exc 1 sqm but nexc 2 sqm each complete all as specified

Taking down shutters n.exc 1 sqm each complete all as specified

Supply & fixing steel windows or ventilators, with top hung shutter including hinges steel peg stay, complete

S&F, 35 mm thick 2nd class softwood glazed and skeleton shutters, open reabeted and prepare to received glass fitted with cut and mitred beads for secuing glass for ventilators.

S&F, 25 mm thick 2nd class softwood glazed and skeleton shutters, open reabeted and prepare to received glass fitted with cut and mitred beads for secuing glass for ventilators.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/galvanized wire staples all as specified.

S&F 35mm teak face Flush shutter laminated particle board solid core construction with block board core and plywood face panels commercial type on both side complete all as specified.

Supply & fixing solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube

Supply & fixing factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification.

S&F Aluminium, anodised, barrel tower bolts,150mm, of extruded section and fixed

S&F Aluminium, anodised, barrel tower bolts,100mm, of extruded section and fixed

S&F 250 mm Aluminium alloy, anodised, sliding door boltwith hasp and stapple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 125mm Extruded aluminium alloy handles, fabricated type. Anodised

S&F 100mm Extruded aluminium alloy handles, fabricated type. Anodised

S&F 100 mm long butt hinges medium weight cold rolled MS and fixed

S&F 75 mm long butt hinges medium weight cold rolled MS and fixed

S&F 30cm long hold fast conforming to Fe.290. Gde-E-165 of Sectiion 25x6mm

M&L preparation of new wooden surfaces, two coats of synthetic enamel paints, over a coat of pink primer, surfaces of any discription, not otherwise discribed, over 10 cm width or girth for doors,ceiling, complete.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone concrete or brick surround glazed with putty or fixed with bead complete.

M&L 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal, complete all as specified and directed by Engr-in-charge.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal, complete all as specified and directed by Engr-in-charge.

M & L 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 15 mm dia.

M & L 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors of 20 mm dia.

S&F, for 15 mm bore ISI marked fancy bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, chromium plated, fixed in repair, complete all as specified and directed by Engr-in-charge.

S&Fin repair for vitreous china wash basin, white, flat back, size 550 X 400 mm excludng tap, wter chain and blog but includind bracket, fixed in repair , complete all as specified and directed by Engr-in-charge.

S&F, for 15 mm bore ISI marked fancy Pillar tap of cast copper alloy with capstan heads, screwed down, high pressure, with or without lettered 'Hot'or 'çold' with lonfg screwed shanks and fly nuts,screwed for iron pipe or for brass ferrule, chromium plated, fixed in repair, complete all as specified and directed by Engr-in-charge.

S&F, in repairs viterous china squatting pan,Orissa Pattern size 580 X 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe) including making good to floor, complete all as specified and directed by Engr-in-charge.

S&F in repair PVC connection of 15 mm sixe with PTMT nuts of length 450 mm , complete all as specified and directed by Engr-in-charge.

S&F, Vitreous china bowl urinal flat back, size of 456 X 355 X 265 mm white, with grating and union for discharge pipe ( excluding flushing cistern., flush pipe and waste pipe) fixed in repair , complete all as specified and directed by Engr-in-charge.

S&F, in repairs viterous china wash down water closet pan ( Pedestal pattern) including saet cover and making good to floor, complete all as specified and directed by Engr-in-charge.

S&F, in repairs,10 ltr capacity PVC valveless, syphonic action type,flushinf cistern,low level,white, with inlet, ball vavle, floate and handle including brackets and flush pipe, complete all as specified and directed by Engr-in-charge.

HONY CAPT RIGZIN SAMPHEL