Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.9 LAccepted-AOC V P O JAGANOO TEH DISTT UDHAMPUR J K 182124 | UDHAMPUR | JAMMU AND KASHMIR | 182124 | L1 | Accepted-AOC AOC to lowest bid of M/s Hans Raj Sharma | |
| 2 | L2₹26.9 L+₹2,676.40 (0.10%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest bid | |
| 3 | L3₹27.9 L+₹96,783.60 (3.60%)Rejected-Finance NOT AVAILABLE | L3 | Rejected-Finance Being other than lowest bid | |
| 4 | L4₹30.2 L+₹3.3 L (12.3%)Rejected-Finance | L4 | Rejected-Finance Being other than lowest bid | |
| 5 | L5₹31.3 L+₹4.4 L (16.4%)Rejected-Finance NEAR TCP DOMAIL WARD NO 2 UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L5 | Rejected-Finance Being other than lowest bid |
| Sl No | Description | Qty | Unit | HANS RAJ SHARMA L1 | s l sharma and sons L2 | TULSI RAINA AND SONS L5 | M/S GURU DEV BUILDERS L4 | DURGA CONSTRUCTION CO L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Chipping / removing loose concrete up to reinforcement bars, without damaging the reinforcement, removing all the loose materials and to make all the exposed surfaces free from oil, dust and all impurities etc. complete all as specified and directed. | 60 | Sqm | 40 ₹2,400 Lowest | 500 ₹30,000 | 50 ₹3,000 | 50 ₹3,000 | 80 ₹4,800 |
| 2.00 | M&L for removing all loose scale and corrosion deposits of the exposed corroded steel including surface preparation, corroded steel should be cleaned all around including the back of exposed reinforcement with the clearance/ gap between steel and concrete as recommended by manufacturer, then applying rust remover with brush by complete wetting the rusted material surface by rust remover and leaving for 24 hours and thereafter surface preparation of coated bars and applying 2nd coat of rust remover and leaving the same for the specific period as per manufacturer's instructions and further again preparing and cleaning the steel surfaces for treatment, complete all as specified and directed by the Engineer-in-Charge.
Make :- Sika Rustoff 100 / Fosroc Rebacklens / BAS Emaco S420. | 60 | Sqm | 40 ₹2,400 Lowest | 500 ₹30,000 | 100 ₹6,000 | 50 ₹3,000 | 120 ₹7,200 |
| 3.00 | Providing and fixing rebar of 8/10/12mm dia TMT bars of required length and diameter with sika anchor fix @ 3+ fosroc lock fix / equivalent in BAS wherever required in RCC members including power drilling, cleaning of holes, then rebar should be inserted in the holes that should the filed with epoxy as mentioned above to ensure the bond as per manufacturer's instructions complete as per site requirement and as directed by Engineer-in-Charge. | 165 | KG | 70 ₹11,550 Lowest | 90 ₹14,850 | 100 ₹16,500 | 140 ₹23,100 | 150 ₹24,750 |
| 4.00 | Providing and fixing rebar of 16/20mm dia TMT bars of required length and diameter with sika anchor fix @ 3+ fosroc lock fix / equivalent in BAS wherever required in RCC members including power drilling, cleaning of holes, then rebar should be inserted in the holes that should the filed with epoxy as mentioned above to ensure the bond as per manufacturer's instructions complete as per site requirement and as directed by Engineer-in-Charge. | 200 | KG | 68 ₹13,600 Lowest | 90 ₹18,000 | 90 ₹18,000 | 160 ₹32,000 | 180 ₹36,000 |
| 5.00 | Corrosion Resistance Coating :- M&L for applying passivator / anti corrosion coating to the prepared reinforcement steel surfaces of relevant items mentioned here-in-above of this BOQ. The material shall be cement based polymer modified coating for corrosion protection and shall be applied as per manufacturer's instructions, complete all as specified and directed.
Note :- Site for application is at various locations and height varies upto 15.0 Mtr. Cost for scaffolding and other means shall be deemed to include in the quoted rates.
Make :- Sika Armatec 108 / Fosroc Nito cole AP-35 / Equivalent in BASF. | 60 | Sqm | 325 ₹19,500 | 500 ₹30,000 | 50 ₹3,000 Lowest | 120 ₹7,200 | 60 ₹3,600 |
| 6.00 | M&L for preparation of old RCC / concrete surface and applying a coat of (two components solvent free) epoxy bonding agent using brush after cleaning of surface from all dust or laitance complete all as per manufacturer's instructions and as directed by Engineer-in-Charge.
Note :- Site for application is at various locations and height varies upto 15.0 Mtr. Cost for scaffolding and other means shall be deemed to include in the quoted rates.
Make :- Sika Sikadur 32 LP / Fosroc Nitobond EP / Equivalent in BASF. | 60 | Sqm | 60 ₹3,600 Lowest | 500 ₹30,000 | 150 ₹9,000 | 140 ₹8,400 | 180 ₹10,800 |
| 7.00 | Providing and applying ready to use single component high strength polymer modified cementious repair mortar 25mm thick with water / powder ratio as specified by manufacturer so as to achieve the following parameters :-
(i) 28 days Compressive Strength >= 50 N/mm2
(ii) Flexural Strength at 28 days>= 5 N/mm2
Note :- Site for application is at various locations and height varies upto 15.0 Mtr. Cost for scaffolding and other means shall be deemed to include in the quoted rates.
Make :- Sikatop 122 HS / Fosroc Nito Mortars / Equivalent in BASF | 60 | Sqm | 440 ₹26,400 Lowest | 500 ₹30,000 | 650 ₹39,000 | 630 ₹37,800 | 900 ₹54,000 |
| 8.00 | Curing Compound :- M&L for applying high efficiency water based film forming curing compound over the fresh concrete cementious surface to form a continuous non-penetraling coating providing a barrier to moislure loss ensuring more effcient cement trydration improved durability and reduced shrinkage. Teh compound shall be applied by sprayer only as per manufacturer's instuctions to ensure complete and proper coverage, pump pressure should be maintained to give an even fine spray and finish as per the manufacturer's specification and as directed by Engineer-in-Charge. | 60 | Sqm | 100 ₹6,000 Lowest | 500 ₹30,000 | 100 ₹6,000 Lowest | 190 ₹11,400 | 180 ₹10,800 |
| 9.00 | M&L for making 'V' groove of 10mm wide and 30mm deep or upto the extent of crack present at site over crack line using electricity operated angle grinder with diamond concrete waw blade and cleaning it by air blower. The groove shall be cut on the concrete surface along the crack over beam or column to be repaired. Thereafter sealing of exposed 'V' groove with solvent free, moisture tolearnt, thixotropic two part structrual adhessive and epoxy repair mortar cum surface leveling mortar, complete as per manufacturer's instructions and as directed by Engineer-in-Charge. | 35 | RM | 50 ₹1,750 Lowest | 50 ₹1,750 Lowest | 150 ₹5,250 | 325 ₹11,375 | 180 ₹6,300 |
| 10.00Notes :- The rates quoted against serial item Nos 1.00 to 9.00 here-in-above shall includes the followings :- (i) The work shall be executed only through authorized applicator of manufacturer. (ii) All scaffolding work and safety measures such as provision of props and supports shall be of steel and extent of provision shall be to the entire satisfaction of GE. (iii) After obtaining approval of the makes of products the contractor shall give a letter from the manufacturer regarding the details of agency and name of person to be deployed for carry out repair & supervisor of work. (iv) The T&P shall be strictly as per manufacturer instruction. (v) Necessary jacks shall be errected to support various floors before exposing columns / beams for repair and it shall also be ensured that no damage is made to the existing structure during repair process & all safety norms shall be followed. | ||||||||
Tender Value
₹38.4 L
EMD Value
₹76,760
Closing Date
6 Oct 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (North) Udhampur
GE (North) Udhampur C/O 56 APO PIN - 901 220
SPL REPAIR TO BLDG NO. P-26 (QTR NO 01 TO 04) JCOS MD ACCN OF 57 WIRELESS EXPERIMENTAL UNIT AT KRIMCHI COMPLEX UNDER GE (NORTH) UDHAMPUR.
2025_MES_729480_1
GE/U(N)-68/2025-26
Open Tender
Civil Works
Item Rate
180 days
AOR of GE (North) Udhampur
As per NIT
6 documents required · 6 mandatory
₹500
GE (North) Udhampur
₹76,760
Yes
7 Nov 2025
4 Sept 2025
13 Oct 2025
4 Sept 2025
6 Oct 2025
19 Sept 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .