LOT1

Scrapping old painting surface including disposal of all scraped material to a distance of 30 meter as directed by engineer in charge for small area for big area as per mord.

Earth work in embankment /damaged left bank side slope by by power transported earth with lead beyond 200 m and up to 1 km including excavation, loading, unloading, comaction, ramming, dressing and all lifts complete exceeding royalty will be applicable from time to time on govt order.

Brick lining on both side of the road of M-150 bricks 7cm wide 11cm deep, laid with mud mortar including labour & supply of bricks finished to the required template and in proper alignment and also including dressing and ramming the excavated earth,labour , T&P etc complete (S.I. 765).

Providing, laying, spreading and compacting stone aggregates of specific size of water bound macadam Grade-2 specification including spreading in uniform thickness, laying by Paver machine, hand packing, rolling with 3 wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding Materials to fill up the interstics of coarse aggregate, watering and compacting to the required density, as per Latest MoRD Specification. ( By Mechanical Means)

Providing, laying, spreading and compacting stone aggregates of specific size to water bound macadam Grade-3 specification including spreading in uniform thickness, laying by Paver machine, hand packing, rolling with 3 wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density, as per Latest MoRD specification. (By Machenical means)

Providing & applying Primer coat with bitumen emulsion (ss)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.75kg per sqm using mechanical means as per technical Mord Specification Clause 502.

Providing & applying tack coat with V.G. 10 using bitumen distributor at the rate of 0.30 Kg per sqm on the prepared granular surface treated with primer cleaned with hydrolic broom as per Technical Specification Clause 503.

20mm thick Open-Graded Premix Carpet using Bituminous (penteration grade/modified bitumen) Binder-Providing, laying and rolling of open-graded premix surfacing of 20mm thickness composed of 13.2 mm to 5.6mm aggregates either using viscosity grade bitumen VG-10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a hot mix plant, laying with paver and rolling with a smooth wheeld roller 8-10 tonne capacity, finished to required level and graded to be followed by seal coat as per latest MoRD specification. (By Machenical means)

Providing and Laying seal coat by mannual means with V.G.-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type C as per latest MoRD specification. (By Machenical means)

Providing and Laying of hot applied thermoplastic compound 2.5 MM thick including reflectorising glass beads @250 Gms /Sqm area thickness of 2.5MM is exclusive of surface applied glass beads as/IRC:35-2015 the finishesd surfase to be level ,uniform and free from streaks and holes. rates are inclusive of all taxes, royalty etc. all T&P /machine materials & labour required for proper completion of work.