SPL REPAIR TO BLDG NO T115 OR LIVING AND PROVN OF 07 GEYSER BLDG NO T108 AND P58 AND 02 TOILET AND 01 BATHROOM BLDG NO T28 AND WATER PIPELINES FROM SECTOR C TO COOKHOUSE AT 5MILE AND RETAINING WALL AT BACK SIDE OF BLDG NO T45 UNDER GE GANG

Dismantling old PGI/CGI sheeting any gauge, thickness, including Nainital. Sikkim or similar pattern roof/ facia etc complete all as specified and as directed.

Supply and fix 0.50mm thick pre - painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and as directed by the Engr-in-Charge.

All as per item No 2.00 here-in -above but except sheeting complete all as specified and as directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc and fixed with self tapping screws complete all as specified and as directed by the Engr-in-Charge.

M & L for applying two coats of synthetic enamel paint (1st grade quality) on new or previously untreated steel surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed.

Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and as directed.

S&F 4mm thick (E-Boards) Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified and as dirceted.

S & F for Anodised aluminium snap grid frame work for false ceiling confirming IS:733, 737 & IS:1285 ; all as specified and as directed.fix with hanger 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

S&F for 6 mm thick plywood, grade BWR, type BB, fixed in wall, flat or slopingwith screws to timber frame work complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint (1st grade quality) over one coat of pink primer complete all as specified and as directed.

M&L for Plain fillets square, rectangular or triangular in section Exc 3 & n. Exc 6sqcm wrought, secured with nails or brads complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over 15mm thick screed bed in CM(1:6) complete all as specified and as directed by Engr-in-charge

M&L for glazed coloured ceramic tiles (300x200x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar etc complete all as specified and as directed.

M&L for autoclave cellular(aerated) concrete block masonry, the size of autoclaved cellular (aerated) concrete block use as specified as per site requirement having compressive strength not less than 5.00 N/Sqm (5.00 Kg/Sqcm) conforming to IS: 2185 (Part-3)-1984, setting in CM(1:6) complete all as specified and directed. Note:- (i) Sampling and testing of AAC concrete blocks shall be carried out in accordance with IS Specification. (iii) Manufacturer certificate to be produced that masonry units conform to the requirements of this specification and IS:2185 (Part-3). (iii) Contractor should produce independent tests certificate of AAC Block from manufacturer before or immediately after delivery.

M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & smooth using without extra cement etc complete all as specified and as directed.

M&L for rendering 20mm thick in cement mortar (1:4) in two layers on other than fair surfaces of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & smooth using without extra cement etc (WPC for finishing layer will be paid seperately as supply only) complete all as specified and as directed.

Supply only liquied water proofing compound complete all as specified and as directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper, over a coat of alkali resistant primer over 3mm thick wall care putty on wall etccomplete all as specified and as directed.

M&L for preparation of new plastered and other surface of walls and applying two coats of cement base paint , complete all as specified and as directed.

M&L for clearocolle on old plastered and other surface of walls and applying two coats of cement base paint , complete all as specified and as directed.

M&L for complete removal of existing treatment on old plastered surfaces on walls and applying two coats of oil bound distemper, over a coat of alkali resistant primer over 3mm thick wall care putty on wall etc complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site complete all as specified and as directed.

Taking down chowkats or frames not exc 1.5 Sqm and (without taking off shutter from the frames) and removal from site complete all as specified and as directed.

S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Dismantling of timber in scantling 40 sqcm and over in section in any position in unframed work complete all as specified and as directed.

M&L for wrought Second class hard-wood in scantlings and timber framed and fixing etc complete all as specified and as directed.

M&L for wrought Second class hard-wood in scantlings and timber framed in repairs, to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions to store etc complete all as specified and as directed.

M&L for preparation of old or previously treated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Supply & fix steel windows Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and as directed.

Supply & fix steel windows Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded etc complete all as specified and as directed.

S/F for 3 mm thick Sheet glass,ordinary qualityand glazingwith oil putty in square n exc 0.5 sq. m in each panel complete all as specified and as directed.

M&L for stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple etccomplete all as specified and as directed.

Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed by the Engr-in-Charge.

Supply and fix aluminium alloy anodised sliding door bolts 250 mm long with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed.

Supply & fix Aluminium handles, 150 mm size, cast type, anodised complete all as specified and as directed.

S&F of 100mm size mild steel butt hinges medium weight complete all as specified and as directed.

S&F in repaired aluminium power coated fancy curtain rails plain or colour 20 to 25 mm dia as approved with teak wood finishing brackets and knobs complete all as specified and as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as speciefied and as directed.

S& F in repair 15mm bib taps,CP cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixe etccomplete all as specified and as directed.

S& F in repair 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed etc all as specified. For wash basin complete all as specified and as directed.

S&F 10 liter PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and as directed.

S&F in repair aluminium anodised tubular towel rail 20mm dia D type 60cm long between flange complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Supply and fix in repair vitreous china, white, flat back wash hand basin of size 550 mm x 440 mm including brackets (of suitable size) including 32 mm bore brass chromium plated waste coupling, 32 mm dia PVC waste pipe etc. complete including taking down old wash hand basin alongwith fittings complete all as specified and as directed.

S&F in repair for Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.(excluding flushing cistern & flush pipe) complete all as specified and as directed.

S&F for Grating doom 100mm dia of PTMT complete all as specified and as directed.

S&F for PVC (SWR) bends any 75mm dia radius complete all as specified and as directed.

S&F for PVC (SWR) bends any 110mm dia radius complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Taking up or down 15mm bore dia steel water tubings including fittings etc including cleaning for re-fixing or removal from site complete and making good disturbed surfaces of walls / ceilings etc complete all as specified and as directed.

S & F for 15 mm bore steel tubing medium grade galvanised with all fitting and complete to walls & laiying in floors complete all as specified and as directed.

Taking up or down 20mm bore dia steel water tubings including fittings etc including cleaning for re-fixing or removal from site complete and making good disturbed surfaces of walls / ceilings etc complete all as specified and as directed.

S&F for 20 mm bore steel tubing medium grade galvanised with all fittinged complete to walls & laid in floors complete all as specified and as directed.

M&L for raking out joints/ pointing to random rubble masonary coursed or uncoursed work in walls on edge in floors, surface channels, roofs, etc complete all as specified and as directed.

M&L for raised pointing in CM (1:4) to block in course or squared rubble coursed or uncoursed masonry or concrete block walling etc complete all as specified and as directed.

M&L PCC (1:3:6) type C2( using 40mm graded crushed stone aggregate) as in surface channels/drain including forming fair finished to drain channel.completed all as specified and as directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 deep and getting out soft/loose soil complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out complete all as specified and as directed by the Engr-in-Charge.

Removing excavated materials(soil) to distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cms in depth in soft/loose soils complete all as specified and as directed by the Engr-in-Charge.

M&L for PCC (1:4:8) , type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

Material & labour for hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and as directed.

M & L RCC (Normal mix) (1:2:4), type B1 (using 20mm graded crushed stone aggr) as in beams, cantilevers, lintel over 1.5m span complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 16mm graded crushed stone aggregate) hollow block masonry exc. 10 cm in width and setting in (1:6) cement mortar complete all as specified and as directed.

M&L walling of RR stone masonry uncoursed, well bonded, bedded and solidly hearted built in CM (1: 6) complete all as specified and as directed.

M & L for TMT bars 10mm dia and over cut to length bent to shape required incl, cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to IS:1786 complete all as specified and as directed.

M & L for TMT bars 5mm dia and over upto and incld 10mm dia as in stirrups, spacers and binders and binding with MS wire not less than 0.9mm dia (annealed) conforming to IS:1786, complete all as specified and as directed.

M&L steel work in rolled mild stell roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) including distance pieces, cleats etcing to I.S 1161-1979 grade st-240 complete all as specified and as directed.

M&L for fair rough finished formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

M&L Preparation of newly plastered surfaces of walls and applying three coat of white wash on new surfaces of walls complete all as specified and as directed.

Materials and labour for 75mm thick PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub-base of floor over and including 50 micron polythene film laid complete all as specified and as directed by the Engr-in-Charge.

Materials and labour for 40mm thick PCC (1:2:4) type D2 (using 20mm graded crushed stone aggregate) as in sub-base of floor laid complete all as specified and as directed by the Engr-in-Charge.

Material & labour for non skid ceramic coloured tiles 7mm thick (Square/ rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floor etc conforming to IS- 13712, grade B-II - (a) set and jointed in neat cement slurry and pointed in white or coloured cement over including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

Materials & labour for glazed ceramic tiles coloured of size 300 x 200 mm x 7 mm thick fixed on vertical surfaces such as skirting/dado etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Supply and Vitreous China squatting pan of ‘Orissa pattern’, of size 580 mm x 440mm (white) with integral foot rest‘P’ or ‘S’ trap, front or back inlet, any pattern (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor complete all as specified and as directed.

S&F for PVC low level flushing cistern of 10 ltrs capacity action type white body with intel ball valve float handle bracket flush pipe etc complete and connecting to WC with PVC flushing pipe complete all as specified and as directed.

S & F 75mm lon butt hinges medium weight cold rolled MS complete all as specified and as directed.

S&F Extruded aluminium alloy handles 125mm long, fabricated type, anodised. complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches/fixed to walls complete all as specified and as directed.

M & L for PCC (1:3:6) type C-2 (by using 40 mm graded crushed stone aggregate) as in bed to drain pipes 100 mm bore, including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and as directed by the Engr-in-Charge..

Cutting into existing manholes in cement mortar (1:2:4) types B-1 for connecting new drain internal dia 150mm making good to pipes and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) smooth finished and reforming benching are required 110mm diacomplete all as specified and as directed.

S&F cast iron Nahani trap 100 mm mm bore etc complete all as specified and as directed.

S&F 110 mm PVC (SWR) P or S trap complete all as specified and as directed.

S&F 110 mm PVC (SWR) vent cowl complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone agg) as in plinth protection, path etc 75 mm thick finishing surfaces even and smooth without using extra cement including construction joints at every 3 m interval and each coner and provition of mastic filling complete all as specified and as directed.

S/F Wash basins, Vitreous China (flat back or angle back type) of size 630x450mm inlcuding matching pedastal fixed with and including cp brackets with complete fitting complete all as specified and as directed by the Engr-in-Charge.

Rough excavation in soft/ loose soil not exc 1.5m deep complete all as specified and as directed.

Excavation in over areas n.exc 1.5m deep not exc 3.0 m deep and getting out in soft/loose soil and complete all as specified and as directed.

M&L PCC (1:3:6), type C2 (using 40 mm graded crushed stone aggregates) on in foundation, filling and mass concrete complete all as specified and as directed.

M&L for Plain cement concrete (1:3:6), type C-2 as in in retaining walls etc including plums of stone boulders (Basalt, trap or any other approved) of size 200 to 300mm complete all as specified and as directed.

Supply only Boulders exceeding 20 cm and upto 30cm dia (Basalt, trap or any other approved) of size 200 to 300mm complete all as specified and as directed.

M&L Plain cement concrete (1:2:4), type B0 (using 12.5 mm graded crushed stone aggregate) in coping including weathering slightly rounded or chamfered angles and trotting complete all as specified and as directed.

Material & Labour for Hand packing using Broken stone or boulders (any thickness) at back of block masonry retaining wall and raising or lowering to the required level complete all as specified and as directed.

M&L RCC M25 (design mix) using 20 mm graded stone aggregate as in RCC band complete all as specified and as directed.

Formwork to faces of wall, retaining wall for rough finished surface complete all as specified and as directed.

S&F of geosynthetic material 75mm dia as in weep holes cover complete all as specified and as dircetd.

Extra for forming fair finished drain or channel 30 cm inner girth complete all as specified and as directed.

E/M: M&L point wiring complete with 2.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable for working voltage 1100 volt grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25mm size PVC rigid non metallic casing caping (Double lock) with all casing caping fittings & accessories with PVC gang box including 1.5 sqmm PVC unsheathed single core stranded copper conductor (FRLS) calbe as earth continuty conductor connected to earth dolly complete for SSC 15 Amp complete all as specified and as directed.

S&F switch socket combination, 2 in 1, 3 pin, 15 Amp, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as specified and as directed.

Supply and fix brass tee of outer dia 16mm dia complete all as specified and as directed.

Supply and laying of CPVC pipes SDR11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors etc of outer dia 16mm ida complete all as specified and as directed.

M&L for cutting existing steel tubing for alteration (Each cut measured) including screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to from connector) done in pisition without taking down complete all as specified and as directed.

Supply and fix stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron or for unions and fixed to size 1.5mm complete all as specified and as directed.

Supply and fix electric water heater, storeage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece complete all as specified and as directed.

Repairs and maintenance of cutting/chasing of walls or tiles, plaster and finishing with tile/plastering, whitewash of walls after fixing of geyser complete all as specified and as directed.

Dismantling and taking out 25mm dia bore old unsv rusted GI water mains and removal completa all as specified and as directed.

All as per item No. 113.00 here-in-above but 40mm dia complete all as specified and as directed.

All as per item No. 113.00 here-in-above but 50mm dia complete all as specified and as directed.

All as per item No. 113.00 here-in-above but 80mm dia complete all as specified and as directed.

S&F 25mm dia bore GI tubing medium grade ISI marked laid in trenches/laid under floor on ground/floor including all fittings such as elbow, union, reducer, tees, bends etc and short length complete all as specified and as directed.

All as per item No. 117.00 here-in-above but 40mm dia complete all as specified and as directed.

All as per item No. 117.00 here-in-above but 50mm dia complete all as specified and as directed.

All as per item No. 117.00 here-in-above but 80mm dia complete all as specified and as directed.

S&F in replacement gun metal gate valves of size 25mm bore ISI marked with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in replacement gun metal gate valves of size 40mm bore ISI marked with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in replacement gun metal gate valves of size 50mm bore ISI marked with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in replacement gun metal gate valves Class PN 1.6 of size 80mm bore ISI marked with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring(light,fan,socket or power) complete along with fittings such as switches ,Sockets, ceiling rose , lamp holder ,tube light fittings and making good distrubed surfaces on walls etc. complete all as specified and as directed.

M & L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) Cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25 mm size PVC rigid non matellic conduit with all concealed fittings & accessories with PVC Box backelite sheet fixed with brass screws & cup washers including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch / DB's or common earth dolly complete for for light point controlled by one switch 5/6 Amp one way complete all as specified and as directed.

All as per srl item No.126.00 here-in-above but for one socket outlet/metal clad socket of 5 Amps fixed on independent board with 1.5 Sq mm multistranded copper conductor wire FRLS PVC insulated and 1.5 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and as directed.

All as per srl item No.126.00 here-in-above but, one socket outlet, three pin, 5/6 Amp on the same board with other switches complete all as specified and as directed.

All as per srl item No.126.00 here-in-above but for one socket outlet/metal clad socket of 15 Amps fixed on independent board with 2.5 Sq mm multistranded copper conductor wire FRLS PVC insulated and 2.5 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and as directed by Engineer-in-Charge

S&F switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete all as specified and as directed.

S&F Switch socket combination, 2 and 3 pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as specified and as directed.

S&F Ceiling rose, PVC/polycarbonate insulated body, 3 terminal and 240 volts, ISI marked complete all as specified and as directed.

S&F in sheet metal enclosure for 8 way Distribution Boards (DB’s), single pole and neutral double door with IP-43 protection suitable for fixing MCB's/lsolators complete all as specified and as directed.

M&L sub main wiring with 2 runs of 6 sqmm PVC insulated unsehathed copper cable multistand 1100 V of FRLS grade with drawn in concealed PVC conduit not less than 25mm dia and one run of PVC insulated serviceable of 6 sqmm as earth continuity conductor drawn in casing and capping with accessories complete including taking down old unservicaeble wiring complete all as specified and as directed. NOTE: 3 runs of 6 Sqmm and 1 run of conduit will be measured as one unit i.e RM

S&F MCB single pole & neutral 40 to 63 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as specified and as directed.

S&F MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as specified and as directed.

Supply and fix in replacement of 20 W LED tubelight fitting with lamp,Extruded aluminium, PC Diffuser, efficiency >125 lm/ W, glare free, THD<10%,Potted electronic driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fix in replacement of 10 Watt LED Bulk Head fitting Environmenatal friendly pressure die cast aluminium housing,IP-65, ultra morden, energy saving, surface mounted, decorative oval bulk head edge- lit LED luminaries comprising of high brightness LEDs complete all as specified and as directed.

Taking down the Exhaust fan/wall mounting fan heavy duty of 300/250/ 200 mm sweep by disconnecting from the ceiling rose, carrying out necessay repair such as replacement of capacitor/ bearings/ flexible copper cable of suitable size including overhauling by carrying out repair such as applying grease to metal parts, rewinding of burnt coil and replacement of suitable size cotter/split pin as required, reassembling and refixing in original position, fixing of louvers/wire mesh commissioning, testing complete all as specified and as directed by Engr-in-Charge. Notes :- (a) Rewinding of Exhaust fans/capacitor and all accessories and spares included in this quoted rate (b) Rate deemed to be inclusive of new flexible copper wire between ceiling rose to fan connector no extra claim what so ever will be entertained by the department.

Taking down the storage type water heater of any type & size, by disconnecting electric connection, carrying out necessary repair such as cleaning of inner water tank, removing scales,connecting flexible three core copper cable of size 2.5 sqmm and re - fixing in original position, grouting, testing and commissioning, complete all as specified and as directed. Notes : (i) spares replaced shall be measured under quoted rate.

M & L for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'Medium grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print complete all as specified and as directed.

Supply, Laying, jointing & testing in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with cable size aluminum lugs and testing. XLPE insulated, armoured heavy duty electric cables with aluminum conductor, 1100 volt grade, all as specified directed by Engineer in charge of cross sectional area of 16 Sqmm 4 core complete all as specified and as directed.

Supply and laying of DWC pipe,ISI marked in trenches or in cable ducts or fixed on walls using clamps along with all accessories like socket,bend,couplers etc confirming to IS 14930,part-II complete with fitting cutting,jointing etc of size 50 mm outer dia complete all as specified and as directed by Engr-in-Charge

S&F bore 40 mm pipe galvanized iron medium grade complete with all fittings fixing on wall, jointed tested and commissioned complete all as specified and as directed.

S&F single pole & neutral enclosure with a two pin & earth plug & socket complete with one single pole MCB C curve of 20 A rating complete all as specified and as directed.

All as per srl item No.126.00 here-in-above but, wiring with 4 sqmm multistanded cable and earth wire with copper conductor of size 4 sqmm complete all as specified and as directed.

S&F ceiling rose, PVC/polycarbonate insulated body, 3 terminal and 240 volts, ISI marked complete all as specified and as directed.

S&F in sheet metal enclosure for 4 way Distribution Boards (DB’s), single pole and neutral double door with IP-43 protection suitable for fixing MCB's/lsolators complete all as specified and as directed.

S&F LED light fitting 1 x 18 W (4 FT), CRI >=80, CT >=5700K, wall / surface mounted, integrated type, constructed of fire retardant engineering grade extruded plastic & decorative end caps with integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangements complete including 01 No 18 W (4 FT) LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size all as specified and as directed.

Supply and fix of non metallic Ventilating Fans, 200mm sweep 900 rpm, AC single phase, 230 volts including louver connection with multistanded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement, i.e anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and as diorected.

Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts XLPE insulated PVC sheathed IS-7098 (Part-I), screened , PVC bedded and PVC tape sheathed galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core including cable lugs, glands, insulation tape etc complete all as specified and as directed.

S&F water proof 10 watt LED bulk head 1x10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.