Improments works to Kannadhasan 3rd Street Park in Ward No 11 at Maraimalainagar Municipality

Supply and Fixing of Minimast (12Metre) 150W Led Fitting with allFoundation work including cost of Erection charge and labour charge for fixing the same etc Completed

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B a etc.,complete

Supplying and filling in foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying with standard specfication.

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 60mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with Stone Dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, Stone Dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Supply and fixing of M.S Grills For Compound wall with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Conducting Geophysical survey, Quality and Quanty test and transportation charges etc., including labour charges in the field rent of the vechile for reaching the palce,rent of the instrument and excluding charges for the Geologist etc., complete as per Standard Specifications

Supply and delivery of 200mm dia PVC plain casing pipe (CS) including cost and conveyance of materials and labour charges etc., :- Note:-Approximate length of pipe is given the length may be decided as per site conditions during drilling of borewell etc., complete as per Standard Specifications

Supply and delivery of 150mm dia PVC plain casing pipe (CS) including cost and conveyance of materials and labour charges etc., :- Note:-Approximate length of pipe is given the length may be decided as per site conditions during drilling of borewell etc., complete as per Standard Specifications

Drilling of 150mm dia vertical bores in hard rock formation to any required depth as per Geologist report and directed by the departmental officers including transportation charges for the rig and supporting vechiles from one place to another place etc complete asper standard specification.

Supply and delivery of Bore well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rodas per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints.The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation.

supply and fixing of following water supply speicals including cost and conveyance of materials and labour charges etc.,complete

4 core 2.5 sq.mm Cable

32 mm Hdpe Pipe

32 mm G1 Flange

32 mm Gi pipe

32 mm Gi Elbow

MS Clampset

32mm NRV

Nylon Rope

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps,

Supply and fixing of Standing Twister materials of 4x4 inch square tube 3mm with 4inch MS ball set and 12x12inch 16kg MS Sheet gas cutting plates 2 no and 2x2 square tube 3mm thickness 2no bush with base platform finishing with flooring etc including c

Supply and fixing of Air walker materials of 4x4 inch square tube 3mm thick post 7.5 feet with 4inch MS ball set and 1.5inch pipe 3mm 3 feet 2no 12x4 plate frame 16kg MS Sheet with base platform finishing with flooring etc including cost of all material

Supplying and fixing of four seater SEESAW to a height of 0.50m with 80mm dia leaver and 40mm top bar with MS pipes. The seatr is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixing etc complet

Supplying and fixing of Double Swing of height 2.40m height with 40mm dia MS pipes support as legs and top bar is 50mm dia. The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro

Supply and fixing of stainless stell slide bench has 8 feet Chute length 5.25 feet length 18 " width sliding chute on 8 feet length using 304 grade 24 gauge stainless stell plate reiforced with 18 gauge sheet riveted togeather with including cost and co

Hire charges for crane for the purpose of shifting the damaged vechiles including all other charges etc complete…

Providing Double Seater arrangements with Granite Slabs over the 100mm thick Precast Slab with nominal reinforcements and 230mm thick, 600mm height side Brick walls and Plastered with C.M. 1:5, 12mm thick, white washing two coats. The cost shall include all labour and materials and as directed by the departmental officers.

Supply and fixing of Shoulder Wheel materials of 4x4 inch square tube 3mm thick post 7.5 feet post with 3inch MS ball set and 1.5inch pipe 2 feet and 16kg MS Sheet with base platform finishing with flooring etc including cost of all materials all labour cha

Supply and fixing of Marry GO of 4x4 inch square tube 3mm with 4inch MS ball set and 12x12inch 16kg MS Sheet gas cutting plates 2 no and 2x2 square tube 3mm thickness 2no bush with base platform finishing with flooring etc Complete

Supply and fixing of Shoulder and Chess Press materials of 4x4 inch square tube 3mm with 4inch MS ball set and 12x12inch 16kg MS Sheet gas cutting plates 2 no and 2x2 square tube 3mm thickness 2no bush with base platform finishing with flooring etc Complete

Supply and fixing of Push and Pull UP of 4x4 inch square tube 3mm with 4inch MS ball set and 12x12inch 16kg MS Sheet gas cutting plates 2 no and 2x2 square tube 3mm thickness 2no bush with base platform finishing with flooring etc Complete

Supply and fixing of Loop Ring materials of 4x4 inch square tube 3mm with 4inch MS ball set and 12x12inch 16kg MS Sheet gas cutting plates 2 no and 2x2 square tube 3mm thickness 2no bush with base platform finishing with flooring etc Complete