AC IMH

Amount

Design, Supply Installation, testing and commissioning of 11.0 TRnominal capacity ceiling suspended Ductable Air conditioner with theFollowing components.a)11 TR capacity ceiling suspended Ductable Air Conditioner high tech,low height, low noise level indoor unitwith fin and tube type cooling coil,Detachable type drier provided inrefrigerant circuit to reduce moisturecontent multi stage type distributorfor feeding equal quantities of theRefrigerant mixture to all the section ofthe coil, with required valves, directlycoupled blower to reduce troubles andwear & tear compared to belt driveBlower. Thermostatic expansion valve arrangement, lift and pull type aluminium framed durable, washable air filter, Integrated electrical panel with complete microprocessor control with display for easy operation and maintenance of unit common operating conditions of 45 F suction temperature Auto reset type HP/LP safety cut sensor type to improve Reliability of compressor. Type QTY- Ceiling Suspended Blower QTY – 2 Nos Motor Power – 415V /3Ph/50HZ Air flow -4400 CFM

B)11.0 TR capacity suitable for ceiling suspended Ductable Air conditioner high tech Outdoor unit with power saving high efficiency sturdy and rugged 1 No of scroll compressor each with inbuilt internal thermal protector, internal pressure relief valve, Auto reset type HP/LP safety cut sensor out to improve reliability of compressor andcondenser shall be made of super slithigh efficient aluminium fins mechanically bonded to copper tubescondenser ‘L’ type coil to be rigidlyfixed to unit frame with fastenersimported condenser fan & fan bladesto be statically and dynamicallybalanced to reduce noise andVibration. The fans are direct driven3phase motor with protection.Condensing temperature 130’f for thesystem operations. Refrigerant Compressor – Scroll No of Compressor – 1No Refrigerant – R22 Power supply – 415V/3Ph/50HZ No of Fan – 1Nos Types of Mounting – Rubber mounts with sleeve

Supply and filling of R-22 Refrigerant Gas.

Supply & fixing of hard drawn copper Refrigerant piping of suction line of Size 1 1/8” inches with necessary fitting and clamp etc.

Supply & fixing of hard drawn copper Refrigerant piping of liquid line of size 5/8” inches with necessary fitting and clamp etc...

Supply and fixing of flexible canvas connection between indoor unit and ducting and rubber pads, with ceiling Support angle rods etc.

Supply and fixing of suitable MS angle frame if required necessary Base frame for mounting the outdoor units for protection from the rain water with dust flow on the open trace / corridor Floor area

Supply, Fabrication and Installation of GI ducting Ducting arrangement with necessary angle supports, anchor fasteners and threaded rods etc. as required

Supply and Providing Thermal Insulation of 9mm thick –XLPE with aluminium foil./ Nitrile Rubber insulation

Supply and providing acoustic lining for initial portion of ducting with 10mm thick XLPE insulation.

Supply, fabrication and fixing of Volume control dampers individually across the duct

Supply and fixing of powder coated Extruded aluminium supply air grilles/diffuser with MS volume control damper for supply.

Supply and fixing of 1 inch PVC water drain pipe line on wall with suitable Clamp as required.

Towards charges for welding, leak testing, Nitrogen pressure testing, pressure holding, vaccummising, dehydration and other related works etc.

Supply, fabrication and fixing of suitable angle support frame for ceiling mounted the Indoor Units.

Supply and providing of pipeline nitral rubber insulation for section line Refrigerant pipe as required.

Supply & providing of Power supply for MCB to Outdoor unit with 4 core 10 sq.mm copper flexible cable

Supply & providing of control supply for Outdoor unit to Indoor unit HP and LP cut-outs with 7 core 1.5sq.mm copper flexible cable

Supply and fixing of Angle iron support for ducting arrangemens

Supply and fixing of 2.0TR 3star rated energy efficient high wall mounting Split type AC units, consisting of 1no outdoor condensing unit, complete with hermetically sealed compressor with R-22 non CFC Refrigerant and 1no 2.0TR capacity hi-wall mountable Evaporator, blower motor and connected accessories, control with maximum cooling guaranteed and minimum power consumption suitable for operate on 230V-50hz, 1ph AC power supply etc., Make: Carrier/Havells-Lloyd/Sharp/equ

Supply and fixing of 5KVA wall mounting type Automatic voltage stabilizer with time delay arrangements suitable for operation at 230 Volt, 50 Hz, AC power supply (Make: V –Guard)/ Equivalent.

Supply and fixing of angle iron stand for outdoor Unit

Supply and laying of 5/8” & 3/8” copper refrigerant pipe with 2.5sqmm-3 core power cord wire & etc.,

ANNAI ELECTRICALS

Ravi Electricals