Loading
Loading…
Loading…
Tender Value
₹35.2 L
EMD Value
₹70,500
Closing Date
29 Jun 2026, 3:00 pm6d left
Similar tender results from the same govt authority in the past 3 years.
AGM (EM) FCI RO Mumbai
FCI REGIONAL OFFICE MUMBAI
Annual Maintenance Contract of Various Electrical / Mechanical Services at FSD Borivali and FSD Bhiwandi
2026_FCI_913555_1
01/02/EE/2026-27
Open Tender
Electrical Works
365 days
FCI FSD Borivali and FSD Bhiwandi
Please refer Tender documents.
10 documents required · 10 mandatory
₹0
₹70,500
18 Jun 2026
18 Jun 2026
30 Jun 2026
18 Jun 2026
29 Jun 2026
18 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Repairs & maintenance of the following Elect/Mech installation according to the terms & condition as per IE rule 1.Plug point/Power point 2. Fans, E.I., street light/compound lighting 3. water supply 4.LT panel maintenance. Further to provide insulation tape and Tools and Plant as per the site requirement. (AT FSD Borivali)
(Staff Required)
Wireman Gr I - 02 Nos on all days including holidays (rotational basis)
Khallasi - 03 Nos on all days including holidays (rotational basis) | - | Months | 2,15,778 | - | BI01010001010000000000000515BI0100001112 |
| 1.01 | Repairs & maintenance of the following Elect/Mech installation according to the terms & condition as per IE rule 1.Plug point/Power point 2. fans,E.I.,street light/compound lighting 3. water supply 4.LT panel maintenance. Further to provide insulation tape and Tools and Plant as per the site requirement. (AT FSD Bhiwandi)
(Staff Required)
Wireman Gr I - 01 Nos - 4 Days a week
Khallasi - 01 Nos - 4 Days a week | - | Months | 44,050 | - | BI01010001010000000000000515BI0100001113 |
| 2 | Rewinding the motor of the table / pedstal / ceiling / exhaust fan 1200 mm / 1400 mm of all type and make and over hauling including minor repairs and testing of original speed and consumption with gaurantee for one year along with Replacing the existing Ball Bearing & Bushing of complete with alignment of shaft and testing with replacement of Capacitor . | - | Each | 1,028 | - | BI01010001010000000000000515BI0100001114 |
| 3 | Rewinding of open well submersible pump motor of all types and make upto and including 5 HP with coated copper wires and overhauling with minor repairs,etc., testing for the original speed H.P. and no load consumption & guarantee for one year | - | Each | 5,140 | - | BI01010001010000000000000515BI0100001115 |
| 4 | Replacement the existing Impellar of approved make for pump 5 HP of all types with due alignment of the shaft and tested. | - | Each | 3,221 | - | BI01010001010000000000000515BI0100001116 |
| 5 | Replacement the existing Bush and Bearing of approved make for pump 5 HP of all types with due alignment of the shaft and tested. | - | Each | 2,193 | - | BI01010001010000000000000515BI0100001117 |
| 6Providing of following piano type switch / socket as required. | ||||||
| 6.01 | 3 / 5 pin 5 / 6 amp socket outlet ISI Marked | - | Each | 32 | - | BI01010001010000000000000515BI0100001119 |
| 6.02 | 5/6 amps one way Switch ISI Marked | - | Each | 14 | - | BI01010001010000000000000515BI0100001120 |
| 7LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥105 <120 lm/Watt) Supplying of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70,under voltage and over voltage protection, EMI EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). | ||||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
MTF.pdf
Tender Documents • 1.30 MB
BOQ_960074.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid