Special repair for rewiring conduit and conventional light fittings of OTM accn No P-276 of 16 GARH RIF and other sanctioned works under GE(S) Jaipur

Amount

12/SR/BLDG/2020-21 Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete including all fittings such as switches, ceiling roses, pendants, sockets, lamp holder, brackets light fittings tube light fitting, bell/ buzzer ,regulator etc (excluding fans) and making good disturbed surfaces of wall floors, ceiling etc complete all as specified and as directed by Engr-in-Charge to match with existing surface. 12/SR/Bldg/2020-21 - 1660 09/SR/Bldg/2020-21 - 143 03/SR/Bldg/2020-21 - 284 28/SR/Bldg/2019-20 - 362

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators as required for the following :-

One light / fan controlled by one switch. 12/SR/Bldg/2020-21 - 790 28/SR/Bldg/2019-20 - 258

One socket outlet 6 amp controlled by one switch on the same board with other switches. 12/SR/Bldg/2020-21 - 180 28/SR/Bldg/2019-20 - 40

One socket outlet 6 amp controlled by one switch on indepdendent board. 12/SR/Bldg/2020-21 - 200 28/SR/Bldg/2019-20 - 40

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets as required for one 16 amp socket outlet point controlled by one switch on independent board. 12/SR/Bldg/2020-21 - 45 28/SR/Bldg/2019-20 - 24

M&L Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, FRLS insulated, PVC insulated and unsheathed stranded cable 1100 volts grade, ISI marked ( IS-694) in and including PVC casing caping, medium grade, ISI marked, with mild steel sunken boxes with earth dolly zink coated and including mounting frame and over cover plate, including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings:-

One light / fan / bell controlled by one, one way switch. 12/SR/Bldg/2020-21 - 300 09/SR/Bldg/2020-21 - 85 03/SR/Bldg/2020-21 - 148 05/Rev/2020-21 - 120

One 3 pin 5 Amp socket out let on the same board with other switches. 12/SR/Bldg/2020-21 - 60 09/SR/Bldg/2020-21 - 12 03/SR/Bldg/2020-21 - 25 05/Rev/2020-21 - 06

One 5 Amp socket independent controlled by one, one way switch. 12/SR/Bldg/2020-21 - 60 09/SR/Bldg/2020-21 - 18 03/SR/Bldg/2020-21 - 55 05/Rev/2020-21 - 08

One light point controlled by two , two way switch 09/SR/Bldg/20-21 - 04

Description all as per item No 3 here in befor but with 1100 volts grade copper standard conductor cable of size 2.5Sqmm and earth connectivety conductor of 2.5 Sqmm for 3 pin switch socket outlet15Amp independent board complete all as specified and directed by Engineer in charge. 12/SR/Bldg/2020-21 - 25 09/SR/Bldg/2020-21 - 16 03/SR/Bldg/2020-21 - 28 05/Rev/2020-21 - 04

Supply&.Fixing Switch piaon type 230/ 250V grade on top covers (catered in point wiring above) :-

S&F switch piano flush button single pole one way 6 amp complete. 12/SR/Bldg/2020-21 - 1590 05/Rev/2020-21 - 128 28/SR/Bldg/2019-20 - 338

S&F switch piano flush button single pole one way 16 amp complete. 12/SR/Bldg/2020-21 - 70 05/Rev/2020-21 - 04 28/SR/Bldg/2019-20 - 24

S&Fixing socket outlet multipurpose use flush mounting type, 230/250 Volts grade(ISI Marked) on top covers (catered in point wiring above) :-

Socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete. 12/SR/Bldg/2020-21 - 500 05/Rev/2020-21 - 08 28/SR/Bldg/2019-20 - 80

Socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete. 12/SR/Bldg/2020-21 - 70 05/Rev/2020-21 - 04 28/SR/Bldg/2019-20 - 24

S&F ceiling rose surface back lite 65x50mm, three terminal. 12/SR/Bldg/2020-21 - 848 09/SR/Bldg/2020-21 - 30 03/SR/Bldg/2020-21 - 127 05/Rev/2020-21 - 120 28/SR/Bldg/2019-20 - 218

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete. 12/SR/Bldg/2020-21 - 238 28/SR/Bldg/2019-20 - 40

Supply & fix BATTEN, LED Light fittings 1 x 20 W ,240 volt( size-4 feet/1136 mm) long life, surface/wall mounting IP 20, luminaire per watt (Minium) extruded alluminium housing with frosted PMMA diffuser with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Siska CAT part No SSK-T5-22W or equivelent model in Bajaj/Wipro/ Philips/CG /Surya roshni. 12/SR/Bldg/2020-21 - 420 09/SR/Bldg/2020-21 - 15 05/Rev/2020-21 - 100 28/SR/Bldg/2019-20 - 120

All as per item No 10 here in before, but LED light fitting 1 x 8/10 W ,240 volt( size-2 feet) Make - Siska CAT part No SSK-RA-0801-N or equivelent model in Bajaj/Wipro/ Philips /CG /Surya roshni. 12/SR/Bldg/2020-21 - 190 28/SR/Bldg/2019-20 - 50

S&F Lamp holder insulated body with back plate for batten fitting all as per specified and directed 12/SR/Bldg/2020-21 - 70 09/SR/Bldg/2020-21 - 10 03/SR/Bldg/2020-21 - 24 28/SR/Bldg/2019-20 - 40

M&L for Sub main wiring with two runs of 6 Sqmm single core FRLS PVC insulated but unsheathed multi stranded copper conductor cable 1100 volts grade drawn through and including of 25mm dia PVC rigid conduit medium with conduit accessories and fixed to the surface of wall/ceiling as per ISI including one run of 6.0 Sqmm PVC insulated copper conductor earth continuity wire including takin down. 12/SR/Bldg/2020-21 - 300 09/SR/Bldg/2020-21 - 180 03/SR/Bldg/2020-21 - 70 28/SR/Bldg/2019-20 - 150

M&L for Sub main wiring with four of 10 Sqmm single core FRLS PVC insulated but unsheathed multi stranded copper conductor cable 1100 volts grade drawn through and including of 25mm dia PVC rigid conduit medium with conduit accessories and fixed to the surface of wall/ceiling as per ISI including 10.0 Sqmm PVC insulated copper conductor earth continuity wire including taking down. 12/SR/Bldg/2020-21 - 200 03/SR/Bldg/2020-21 - 30 09/SR/Bldg/2020-21 - 50

S&F in repair factory made, sheet distribution boards, double door protection class IP-42 suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 r of the under mention rating

SP&N12 ways. 12/SR/Bldg/2020-21 - 08 03/SR/Bldg/2020-21 - 01 28/SR/Bldg/2019-20 - 06

SP&N 8 ways. 12/SR/Bldg/2020-21 - 23 03/SR/Bldg/2020-21 - 05 05/Rev/2020-21 - 03 9/SR/Bldg/2020-21 - 02

TPN DB 4 way 12/SR/Bldg/2020-21 - 14 03/SR/Bldg/2020-21 - 03 9/SR/Bldg/2020-21 - 02 28/SR/Bldg/2019-20 - 02

S&F MCB 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating :-

SP 5 to 32 amps. 12/SR/Bldg/2020-21 - 200 09/SR/Bldg/2020-21 - 30 03/SR/Bldg/2020-21 - 48 05/Rev/2020-21 - 22 28/SR/Bldg/2019-20 - 64

SPN 32 to 63 amps. 12/SR/Bldg/2020-21 - 31 09/SR/Bldg/2020-21 - 10 03/SR/Bldg/2020-21 - 05 05/Rev/2020-21 - 03 28/SR/Bldg/2019-20 - 08

TPN 100 Amp 10 KA 12/SR/Bldg/2020-21 - 14 28/SR/Bldg/2019-20 - 02

TPN 63 Amp 10 KA 09/SR/Bldg/2020-21 - 02 03/SR/Bldg/2020-21 - 03

M&L Earthing complete as per electrical plate No. 5 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly vertically in ground in a pit depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less then 1.5 metre below normal ground level connected to and including galvanised iron or steel earth strip 25mm x 6mm by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing strip shall be protected by galvanised iron or steel pipe 40mm bore light grade and connected to continuous earth wire on pole / test point. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel, PCC(1:2:4) pit and 50 mm RCC(1:1/2:3) cover complete all as specified & tested complete. 12/SR/Bldg/2020-21 - 02 3/SR/Bldg/2020-21 - 03

09/SR/BLDG/2020-21 All as per Item No 4 above but with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, complete all as specified & directed by Engr-in Charge. 09/SR/Bldg/2020-21 - 08 03/SR/Bldg/2020-21 - 28

Supply&.Fixing Switch modular type on top covers (catered in point wiring above) Make- Havells/Polycab/Anchor/C & S/Cona

Single pole, one way 6 Amp rating. 09/SR/Bldg/2020-21 - 95 03/SR/Bldg/2020-21 - 224

Bell push flush type, 6 Amp. 09/SR/Bldg/2020-21 - 20 03/SR/Bldg/2020-21 - 04

Single pole, one way 16 Amp rating. 09/SR/Bldg/2020-21 - 16 03/SR/Bldg/2020-21 - 28

Single pole, two way 6 Amp rating.

S&Fixing Socket outlet multipurpose use, on top covers (catered in point wiring above) :- Make- Havells (std)/Polycab/Anchor/C & S/Cona

5 Pin 6 Amp (with two pinoutlet of 5 Amp also) 09/SR/Bldg/2020-21 - 30 03/SR/Bldg/2020-21 - 80

6 Pin 16 Amp (with two pinoutlet of 5 Amp also). 09/SR/Bldg/2020-21 - 16 03/SR/Bldg/2020-21 - 28

S&F Electric bell Ding dong type AC 230 volts single pole Make Anchor

Supply&Fixing speed regulator modular type for ceiling fan electronic type 230 Volts complete. Make - Anchor cat part No 22546 or equivelant make of Havells/Bajaj 09/SR/Bldg/2020-21 - 12 03/SR/Bldg/2020-21 - 13

Supply & fix BATTEN, LED Light fittings multi colour (3 in 1, White, warmwhite and coolwarwhite) 1 x 20 W ,240 volt( size-4 feet/1136 mm) long life, surface/wall mounting IP 20, luminaire per watt (Minium) extruded alluminium housing with frosted PMMA diffuser with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Siska CAT part No SSK-SQ-2201-22W-3IN-1 or equivelent model in Wipro/ Philips/CG

Supply & fixing surface mounted LED Mirror light fitting 6 W LED Warmwhite waterproof curve, antique design with fine finishing provide with high power LED, energy saving ,lower power consumption, no RF interference, environmental friendly and recyclable, easy for installation water proof LED Driver suitable for bathroom, bedroom pre-wired twin core twisted flexible copper conductor cable with suitable size as per sample and as directed by engineer in charge

Supply & fix wall Bracket light asthetically designed, SS finish fixture with opal glass diffuser with B22d & E27 lamp holder including 10W LED Lamp with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Havells cat Pt No- LHJC02108499 or equivelent model in Bajaj/Philips/Syska

Supply and Fixing security lights LED 45 W Energy saving & Environmental friendly long life versatile pressure die cast aluminium IP 66 LED Wall mounted Light Luminaries are made of die casted aluminium body and toughened glass cover for uniformlight spread cames LED technology of Britelite. including bracket made out of suitable size of GI medium grade tubing and fixed with clamps nuts and bolts, washer complete all as specified . Make- CG cat Pt No-LSTP-45-CDL or equivalant in HAVELLS ,Syska and Phillips. 09/SR/Bldg/2020-21 - 04 28/SR/Bldg/2019-20 - 04

Takin down old unsv LT indoor panels from the existing mounting of wall and floor, disconnection of all incoming and outgoing LT cables and sub main wiring and electrical circuit complete including making good the distiurbed surfaces of wall/floor all as directed by Engr- in charge.

Supply, install, test and commissioning of indoor type LT Panel Board cubical type made out of 2 mm thick CRCA sheet confirming to IS - 8623 indoor type totally enclosed single door hinged type front opening (glasses for showing meter reading), weather dust and vermin proof top, powder coated painting, locking arrangement, entry holes and glands of suitable size for incoming / outgoing cables including necessary arrangements for grounting on wall with proper fastner and internal copper control wiring of suitable size for instrument, suitable size of copper strip for power connections from copper Bus-bar, suitable arrangement for three pahse meters 01 Nos , RYB Indicating Lamps - 1 Set, complete all as specfied and directed including taking down old with the following :- . (a) MCCB 4 Pole, 200 Amps 415 Volts 25 KA - 01 NO (incoming supply) (b) MCCB 4 Pole, 100 Amps 415 Volts 25 KA - 01 NO (outgoing supply) (c) MCB TPN 63 Amps 415 Volts 10 KA - 01 NO (d) SPN 32 Amps 415 Volts 10 KA Model - C-Curve - 02 NO (e) MCB SP 5-32 Amps 415 Volts 10 KA Model - C-Curve - 12 NO (f) On Load Change Over Switch 125 Amp, 4 Pole confirming to IS/IEC 60947-3/IS 13947-3, modular construction - 01 Nos (g) Space for Digital tamper proof elect meter-01 Nos.

M&L for earthing with steel earth plate electrode of size 60cmX60cmX60mm thick buired directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanized iron wire of size 4 mm dia as earthing lead by means of nuts, bolts and washers of stel, 20 mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover size 30X30cm made of RCC 1:3:6 with suitable hbdle, angle iron frame made of angle iron of size 40X40X4mm, adequate qty of charcoal dust and salt layers all around the earh plate, removal of surplus soil and returning filling in all as required at site including test point made out of steel plate of size 75X75X6mm fixed to wall all as specified in plate No 3 of SSR Part -I and directed by Engr-In-Charge. 09/SR/Bldg/2020-21 - 02 28/SR/Bldg/2019-20 - 02

Supply and fix sheet metal enclosure complete with metallic plug and socket heavy duty moduler type 3 pin (2P + Earth), 25 amp rating single phase 240 volts complete with MCB SP 25 amp “C” series (Make :Havells/HPL/Anchor/havells(std). 09/SR/Bldg/2020-21 - 08 03/SR/Bldg/2020-21 - 02

M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of size 35 sqmm, 4 core.

Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes, laying cables errection of poles / struts/stays etc n.exe 10 Sqm on plan not exceeding 1.5 metre in depth and getting out in any type of soil. 09/SR/Bldg/2020-21 - 28 03/SR/Bldg/2020-21 - 50 05/Rev/2020-21 - 19

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in any type of soil. 09/SR/Bldg/2020-21 - 18 03/SR/Bldg/2020-21 - 32 05/Rev/2020-21 - 12

Removing of excavated material (soil) to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.50metre above the starting point. 09/SR/Bldg/2020-21 - 10 03/SR/Bldg/2020-21 - 18 05/Rev/2020-21 - 07

M & L Sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover. 09/SR/Bldg/2020-21 - 08 03/SR/Bldg/2020-21 - 15 05/Rev/2020-21 - 06

M&L bricks for protection cover to under ground cable (with old size sub class `B` bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm as directed by Engineer in-charge 09/SR/Bldg/2020-21 - 0.9 03/SR/Bldg/2020-21 - 1.6 05/Rev/2020-21 - 0.6

S&F Electric bell multi music type AC 230 volts single pole for AC 230V, 50 Hz .ding dong type(ISI marked)

03/SR/Bldg/2020-21 Supply & fixing Mirror surface mounted LED fitting 14 W (2 Feet)provided with a high output PMMA diffuser for glare free light , IP 20 with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Crompton cat pt No- LCL-14-CDL or equivelent model in Bajaj/Havells/ Philips/Wipro/Siska /Shakti fixture

Supply & fixing Energy saving new generation 10 W LED IP -65 Bulkhead luminare with opal diffuser complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size Make - BAJAJ : BIBWP 10W LED or equivelent model in Wipro/ Philips/Havells

M & L for LED Energy Saving 60 W fitting IP 65 flood light luminaire with pressure die cast aluminium housing 60 W LED fitting complete all as specified & directed by Engr-in-Charge. Make-CG Cat Prt No LSFO-60-CDL or Eqvt in phillips, Havells, Syska and Wipro. 03/SR/Bldg/2020-21 - 06 28/SR/Bldg/2019-20 - 04

RCBOs for earth leackage , overload & short circuit protection 2 pole 100 MA leackage currunt and 32 Amp capacity complete all as specified and directed. 03/SR/Bldg/2020-21 - 05 28/SR/Bldg/2019-20 - 04

M & L for exhaust fan 300 mm sweep compete all as specifed and directed. 03/SR/Bldg/2020-21 - 03 28/SR/Bldg/2019-20 - 08

Supply and fix Louver made of galavnised iron 300 mm including fixing with suitable fastner complete all as specifed and directed. 03/SR/Bldg/2020-21 - 03 28/SR/Bldg/2019-20 - 08

M & L for cutting round hole of 300 mm in exiting stone wall with suitable drilling eqiupment making good the disturbed surface,plastering the surface with cement motar 1:6 complete and mathing the disturbed surface with the existing surface compelete all as specified and directed by engineer in charge. 03/SR/Bldg/2020-21 - 03 28/SR/Bldg/2019-20 - 08

M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of size 16 sqmm, 4 core .

05/Rev/2020-21 Supply & Fixing Decorative box type fitting,Blue coured end caps complete for Retro LED T-8 tubular lamp IP 20 complete. with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Crompton cat pt No- DMLN1LT8-16 or equivelent model in Bajaj/Havells/ Philips

Supply & Fixing Retro LED T-8 tubular lamp IP 20 linear LED T8 20 watt with extruded aluminium/ PC body and PC diffuser complete with inbuilt driver. Make - Crompton cat pt No- LTT8-20 or equivelent model in Bajaj/Havells/Philips

M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of size 10 sqmm, 2 core .

SHREE BHAGWATI ENTERPRISES

M/S Sheeba Enterprises

M/S TRADE LINKERS

M/S AUTOMATION AND SWITCHGEAR CONTROL

M/S STEADFAST ENTERPRISES

agrawal constructions