Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹41.7 L+₹57,300 (1.39%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹41.9 L+₹72,560 (1.76%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹42.3 L+₹1.1 L (2.64%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹42.5 L+₹1.4 L (3.36%)Rejected-Finance C O OPPOSITE BDO OFFICE MANDA AKHNOOR DISTT JAMMU PIN 181201 | JAMMU | JAMMU AND KASHMIR | 181201 | L5 | Rejected-Finance Rejected |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
21 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Faridkot
GE Faridkot Military Station
Repair/maint of parapets, facia, chajjas, plastering ,roofing and other misc B/R works under AGE B/R (P-1) at Faridkot Mil Stn
2022_MES_566030_1
GE FRD-60/2022-23
Open Tender
Civil Works
Item Rate
240 days
GE Faridkot
Class D Category a i
8 documents required · 8 mandatory
₹500
GE Faridkot
₹90,000
Yes
7 Jan 2023
29 Nov 2022
23 Dec 2022
29 Nov 2022
21 Dec 2022
14 Dec 2022
Amount
Taking down cement plaster from ceiling & brick walls including wall tiles / terrazo / kota stone etc ; any type or any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar 1:4, on brick work or concrete surfaces, finished even & smooth without using extra cement in buildings of height upto 15 metres complete all as specified and directed .
M&L for 15 mm thick rendering in cement mortar 1:6, on brick work or concrete surfaces, finished even & smooth without using extra cement complete all as specified and directed .
M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 Cement : 4 Coarse Sand) the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement Plaster 1:1/2:2 (1 Cement : 1/2 Coarse sand : 2 Stone chipping 10mm nominal size) in panels with grooves all round as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note : Payment for providing grooves shall be made separately)
M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.
M&L in repair for brick work with fly ash bricks using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 in buildings of height upto 15 metres complete all as specified and directed .
M&L in repair for brick work with fly ash bricks using old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 in buildings of height upto 15 metres complete all as specified and directed .
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of white wash complete all as specified and directed .
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed .
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying one coat of oil bound distemper including filling of wall care putty in minor cracks (where required) complete all as specified and directed .
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coats of cement base paint complete all as specified and directed .
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coats of white wash complete all as specified and directed .
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coat of oil bound distemper with one coat of wall care putty complete all as specified and directed .
M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coats of weather proof exterior paint complete all as specified and directed.
Demolition/taking out mud from roof, including cutting/uprooting grass, vegetations & root of small plants etc and disposal of retrieved material to a distance n.exc 500m from the starting point complete all as specified and specified
M&L for cleaning of top roof surfaces by wire brushing ,removing all dust,loose particles of concrete including washing the surfaces and applying 10 mm thick screed bed in cement mortar 1:4,finishing the surface finished even and fair without using extra cement with liquid WPC as per manufacturer's instructions complete all as specified and directed . Note : WPC will be measured and paid separately
M&L for one coat of cold applied bituminous primer @ 0.40 Ltr/Sqm after cleaning of surfaces and providing APP based polymeric membrane, minimum weighing 3kg/sqm and minimum 3mm thick, reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application ,torching overlaps as recommended by manufacturer complete all as specified and directed
M&L for lime concrete 1:2:5 (Lime:surkhi:brick ballast(40mm)) terracing in roof , maintaining the slope of 1:40 including finishing the surface finished even and fair with addition of jaggery solution complete all as specified and directed .
Dismantling of Bricks laid, (laid flat or on edge) or brick tiles in floors, roof, channels, kerbs, aprons etc bedded and pointed in any mortar (each layer) complete all as specified and directed.
M&L for 40mm thick brick tiles laid on lime concrete and joints grouted flush in cement mortar 1:3 mixed with liquid WPC as per manufacturer's instructions over & including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed . Note : WPC will be measured and paid separately
All as per item No 24 here-in-before above but except brick tiles complete all as specified and directed .
M&L for cleaning roof surfaces by removing vegetation,mud and dust,loose particles of concrete and washing down with water including disposal of retrieved material to a distance n.exc 250m from the starting point complete all as specified and directed .
M&L for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in roof kerb, mud stops bands, copings, bed plates including weathering, slightly rounded or chamfered angles including necessary form work complete all as specified and directed .
M&L for providing precast cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) as in louvers and jallies, 40mm thick (measured solid) including all moulding but excluding frame and set in cement mortar 1:4 complete all as specified and directed.
Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including disposal of retrieved material to a distance n.exc 500m from the starting point complete all as specified and directed
M&L for 75 mm thick cement concrete 1:3:6 type C-2( using 40mm graded crushed stone aggregates) as in plinth protection, finishing surfaces even and fair including forming construction joints at every 3 metres c/c, 30mm deep x10mm wide, filled with sealing compound grade 'A' complete all as specified and directed .
S&F Non skid coloured heavy duty endura tiles 9 to 10 mm thick of size 300mmx300mm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed .
M&L for 25mm thick plain cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) as in roof padding mixed with water proofing compound after hacking over concrete surfaces including application of cement slurry @ 3Kg/Sqm complete all as specified and directed Note : WPC will be measured and paid separately
Supply only liquid water proofing compound complete all as specified and directed
M&L for flush pointing to bricks laid flat or brick tiles in pavings in floors, roofs, aprons etc in cement mortar 1:3 including raking out joints complete all as specified and directed .
M&L for RCC 1:1.5:3, type A1 (using 20mm graded crushed stone aggregates) as chajjas,beams,floors,parapet and similar suspended works including taking down existing structures and disposal of retrieved material to a distance n.exc 500m from the starting point complete all as specified and directed.
M&L for applying anti rust remover on existing exposed reinforcement surfaces and applying two coats of anti rust paint after cleaning the surfaces of reinforcement complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required, including cranking, bending and binding with & including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .
M&L for use and waste of form work to faces of parapet surfaces, soffits of suspended slabs , such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or slopping) for rough finished flat surfaces of concrete complete all as specified and directed .
Taking down old deteriorated concrete /plaster of old surfaces of facia,parapet,slab edges,projection bottom etc & applying 15mm thick rendering in cement mortar 1:3, finishing surfaces even and smooth without using extra cement including necessary scaffolding,doubing coat complete all as specified and directed. Note:-Work is to executed in buildings of height upto 15 metres and Quoted rate of the item is deemed to included the same.
Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed
S&F anodised aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on aluminium (minimum thickness of powder coating 50 micron) as per the specification. The top & bottom horizontal members and vertical members adjacent to walls shall be fixed with floor, ceiling, walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners complete all as specified and directed.
S&F Powder coated aluminum (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately ) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS :1285, fixing with dash fasteners of required dia and size, including neccessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as specified and the directed .
S&F for 4.8 mm thick, plain sheet glass, ordinary quality and glazing with oil putty , rubber beading or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .
S&F for 4.8 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane including hacking out old glasses complete all as specified and directed .
S&F aluminium handle of size 150mm,fabricated type, anodised complete all as specified & directed.
S&F 150mm size, aluminiun anodised barrel tower bolts of extruded section complete all as specified & directed.
S&F in repair door closer hydraulically regulated, Aluminium (Diecast body), designation No 2, universal type suitable for door shutter 700mm to 850mm width and weight between 36 to 60 kg complete all as specified and directed.
M&L for welding in repairs exc 2.5 cm but n.exc 5 cm in length in metal of thickness n. exc 6mm complete all as specified and directed .
Taking down carefully unserviceable/ old rolling shutter (manual/gear operative) of size exc 15 Sqm but not exc 30 Sqm, denting the surfaces as required, cleaning the guide rails, laths, top cover with the help of kerosene and greasing & oiling properly to make the system smooth /easy functional including supply and fixing new nuts and bolts as per existing size by removing old rusted nuts and bolts, necessary welding (wherever required as directed) giving proper tension to the spring and refixing the shutter and gear box in the same opening after repair work and making good the damaged brick/concrete works to the existing including painting with one coat of synthetic enamel paint on both sides of shutter complete all as specified and directed .
S&F in repair Steel rolling shutters having thickness of lath 1 mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple, bracket plates, clamps, pulley, spring, shaft, hold fast, stopper, pulling hook and other allied parts complete including one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle complete all as specified and directed .
S&F in repair hood covers made out of 1.00 mm thick mild steel sheet including bending the sheet to the required shape and fixing the same to the rolling shutter bracket plate complete all specified and directed .
S&F in repair Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .
S&F in repair Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed .
S&F Roof trusses (framed), trussed, purlins, crane gantries rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc confirmimg to Fe 290 (Gde E -165) complete all as specified and directed
M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
S&F in repair 7mm thick gypsum board as in ceiling fixed with screws as per manufacturer's instructions, including anodised aluminium snap grid frame work for false ceiling of grid 605x605mm,hangers 6mm dia (upto 1200mm length)adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size & length 60mm and expansion hold fasterners 12.5mm dia,40mm long complete all as specified and directed. Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of ceiling.
S&F in repair PVC hollow wall lining interlocking type of 7mm thick plain/coloured /wood grain fitted in to the wall with PVC rawl plug and steel screws including fillets on joints as per manufacturer's instruction etc.complete all as specified and directed. Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of wall.
S&F granite 20mm thick work (table rubbed and polished) as in cooking platforms,steps,jambs and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.
M&L for dismantling of interlocking paver blocks complete all as specified and directed.
M&L for plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.
M&L for sand filling under floor with washed and screened dry fine river sand including watering, well ramming and consolidation complete all as specified and directed .
S&F factory made Machine pressed precast coloured concrete interlocking paver blocks,any shape and size, confirming to IS-15658-2006 of 60mm thickness,M-35 grade, laid with grey cement and pigment complete all as specified and directed .
All as per item No 63 here-in-before above but except paver blocks complete all as specified and directed .
Dismantling terrazzo / glazed tiles in floor/hearth or wall tilling /skirting/dado including cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed.
M&L for 25mm thick, PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregates), as in sub base of flooring ,finishing surfaces even and fair without using extra cement complete all as specified and directed.
S&F Glazed ceramic coloured tiles 450mmx300mmx7mm thick (colour and shade as approved) as in vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles over & including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed .
S&F 9mm thick,vitrified ceramic, light shade, polished (coloured & shade as approved) tiles of size, n.exceeding 0.36 sqm as in floors etc set and jointed in neat cement slurry over & including 15 mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed Note :- A Sum of Rs. 31350.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 22 (Schedule of credit) of Tender Documents.
NEW AMRITSAR CONSTRUCTION COMPANY
M/S BSS AND SONS
Vinod Kumar Bajaj
DEEPAK ENTERPRISES
M/S RAJESH KUMAR and CO.
SHIV SHAKTI BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .