12 WORK IN HEAD CONST OF LT Ss AT DPR Sl NO 56 57 58 59 60 61 62 63 64 65 66 67 UNDER EUDD 7 NOIDA

Amount

Cartage of following material from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to various points site of work including loading and unloading at both ends : -

ST Pole 11 Mtr. Long

PCC Pole 8.5 Mtr. Long

11 KV Disc Insulator T&C Type

11 KV Disc fitting

11 KV Pin Insulator

11 KV Pin with nuts

11/0.4 KV T/F 250 KVA

11/0.4 KV T/F 100 KVA

11 KV TPMO

11 KV Fuse Set

Cable Al. 3x185 Sq.mm. XLPE 11 KV

LT PVC Cable Al. 1x400 Sq.mm.

LT PVC Cable Al. 3.5x240 Sq.mm.

Stay set 16x1800 mm

M.S Earthing Rod (2500x20 mm)

ACSR Dog Conductor

Cable LT ABC (3x120+1x95+1x16) Sq.mm.

3 Phase Distribution Box

MS channel (Dropper) 100x50x2028mm

MS channel (Top) 125x65x2240mm

MS channel (T-off) 125x65x1300mm

O/D cable jointing kit for 3x185 Sq.mm. XLPE 11 KV cable

S/T cable jointing kit for 3x120 Sq.mm. XLPE 11 KV cable

Providing & fixing of following material of standard make / best quality for complete the work of pole structure at HT / LT line as per RESPO norms by the contractor at his own cost : -

Stone Pad 300x300x75mm

Clamp for LT (T-off) with bolt & nuts.

Holding clamp for Top channel, TPMO etc.

Al. lug long barrel, off size (LS)

Danger Board, Barbed wire including jumper

Red oxide paint

Aluminium Paint

ST Pole clamp

LT piercing connector for size 120/95 Sq.mm.

1x70 Sq.mm. Lead

GI Pipe 6" Dia

RCC / Stone Route Marker yellow colour with proper marking.

1x16 Sq.mm. Lead

Suspension clamp

Dead end clamp with I-hook

HDPE Socket suitable for HDPE pipe 160 mm dia.

Drilling of dia suitable for 160 mm dia by trench less method by horizontal boring machine at a depth of 1.5 mtrs below the ground level for laying of cable complete in all respects.

Digging of trench suitable for 160 mm dia by open cut method at a depth of 1 mtrs below the ground level for laying of cable complete in all respects.

Providing of 06 Mtr long pieces of HDPE pipe (4 Kg / m2) 160 mm Dia PN 4 PE 63 (PVVNL approved) after inspection of competent committee at manufacturing site of the items with actual guarantee period.

Laying and interconnecting of above 06 Mtr long pieces of HDPE pipe 160mm Dia PN 4 PE 63 (PVVNL approved) in trench for laying of cable complete in all respects..

Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop.

Road Restoration charges for hot mixed pakka road / CC road / kaccha road / mix soil/ normal soil/ soft & hard rack as it is when start of work as per authority norms.

Laying and pulling of LT / 11 KV Cable through HDPE pipe, DTs to ACBs to LT line, loop & riser complete in all respects.

Hi port test for LT / 11 KV Cable XLPE cable.

Hoisting of cable on double pole structure through GI pipe 6 inch dia 3 mtr long fixed on pole structure including its jumpering complete with clamps, bolts and nuts.

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Fabrication of MS channel / Angle as per site requirement complete in all respects.

Erection of S.T. pole 11 Mtr. including fitting of all reqired accessories of HT/LT line as per RESPO schedule.

Erection of PCC pole 8.5 Mtr. including fitting of all reqired accessories of HT/LT line as per RESPO schedule.

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Construction of Plinth in size 450x450x300 mm of each (0.880 Cu.m) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.

Fixing of 11 KV TPMO.

Fixing of 11 KV Fuse Set.

Fixing of 3 Phase Distribution Box.

Fixing of O/D cable jointing kit for 3x185 Sq.mm. XLPE 11 KV cable

Fixing of S/T cable jointing kit for 3x120 Sq.mm. XLPE 11 KV cable

Grouting & concreting of stay rod 1800x16 mm & Fixing, Tighting & nozzling of stay wire 5 kg with the pole of required tension with clamps, bolt & nut.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Laying, Lifting and final Binding, Sagging of Cable LT ABC (3x120+1x95+1x16) Sq.mm. including fixing of all accessories as per RESPO schedule Complete in all respects.

Construction of new distribution 250 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.

Mounting, installation of 250 KVA T/F (11 Nos.) & 100 KVA (01 No.) Transformer on above Plinth & D/P, alongwith double earthing of the same, complete in all respect as per RESPO schedule.

Providing and installation of LT ACB 630 Amp. with cabinet / structure (L&T, Schneider, ABB, Hevell's, PVVNL approved make) as per following specification with all relevant certificate :-

630 amp. 03 pole fixed manual ACB.

Red/yellow/blue light indication

ON & OFF Indication

Amp., Volt meter& energy meter digital

Metering C.T 630/5A,

Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.

Fabrication of aluminium bus-bar for each phases

Incoming size 425 mm x 50mmx12 mm (twin)

Out going size 720 mm x 50mm x 12 mm(twin)

Neutral size 900mmx50mmx12 mm.

Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.

Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.

Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.

Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.

WORK OF PROVIDING AND FIXING OF 11 NOS. NEW WIREMESH FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT ABOVE PLACE AS PER FOLLOWING (All Material provided by contractor for above work.) :-

1. Frames of size 12'X15'x6' for each fencing of LT Sub-stations. (All Material provided by contractor for above work.) 2. The fencing shall be fabricated out of MS angle iron of size 40x40x5 mm having 2 Nos. legs of 45 Cm. long in each frame duly welded and fixed with wire mesh of size 75mm 25mm, 10 SWG within the frame, pressed under MS flat of size 25x5 mm inside the angle iron on all four sides with the help of duly Welded along with cross bracing of 25x5 mm MS flat on every frame will be grouted in 1:2:4 cement mortar with cement, coarse sand 20 mm gauge stone ballast. 3. Every frame after Fabrication will be painted with one coat of red oxide and two coats of Green synthetic enamel paint of approved make after proper cleaning. 4. The above mentioned frame will be jointed with each other with 70 mm long MS flat of size 25x5mm by first class welding as per site. 5. Fabrication and providing of wire mesh fencing frame for gate of size 4’x6’. Fabricated as per above specifications with proper locking arrangement.

Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)

PROVIDING AND INSTALLATION OF CHEMICAL EARTHING FOR 250 KVA TRANSFORMERS (BODY & NEUTRAL) AND ACB (WITH ALL MATERIAL AND LABOUR) AFTER INSTALLATION RESISTANCE SHOULD BE LESS THAN ONE OHM. AS PER FOLLOWING (The all material and labour shall be provided by the contractor with 12 month guarantee for resistance value less than one OHM.) :-

Providing of earth elctrode for chemical earthing Pipe in pipe type proper hot deep galvanization dia 50 mm length 3 mtr - 32mm x 6mm terminal connection hole dia 8mm The cavity between the pipe & pipe is filled with conductive mixture - for hermetically filling inside the cavity i.e. between secondary conductor & primary conductor, crystalline compound is to be injected in the electrode assembly. It is a combination of high conductivity metal alloys, copper & aluminum power, conductive carbon / cement and bonding material etc the electrode should be sealed from both the ends. The outer pipe of the elctrode should be galavanized the characteristics of this compound is highly cnductive, non magnetic & non corrosive in G.I. Including providing of backfill compound each elctrode should be supplied with bags of 25 kg x 2 bfc compound (ground resistance enhancement powder 50 kgs each CPRI tested for 250 KVA distribution t/f & ACB installed at Above 11/0.4 KV L.T. Substation.

Providing and fixing of GI strip of size 32 mm x 6 mm suitable for 250 KVA distribution t/f & ACB installed at Above 11/0.4 KV L.T. Substation.

Providing and fixing of PVC Pit covers for above earthing electrode terminals.

Nutech Air Projects