REPAIRS REPLACEMENT OF EXTERNAL WATER SUPPLY ELECTRIC DISTRIBUTION SYTEMS LIGHT FITTINGS GEYSERS CLEANING OF UG SUMPS OH RESERVOIRS AND CONNECTED ALLIED WORKS AT PRTC VASANTH ENCLAVE MI LINE ML LINE KATOCH LINE 106 INF BN TA 160 MC MF AND 2 PARA SF

Amount

Excavation in trenches in hard/dense soil not exc. 1.5 mtr wide and not exc. 1.5 mtr in depth for laying of cables/errection of pole etc complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5 m in deep and not exc. 3.00 mtr deep for cable and getting in hard/dense soil complete all as specified and as directed.

Returning, filling in excavated soil, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil etc complete as specified as directed.

Removing the excavated material to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complee all as specifeid and as directed.

Sand cushioning in layers for cables in trenches / ducts for cable using dry river sand including consolidation complete all as specified and directed. NOTE: Punned thickness will be measured for payment purpose.

Bricks, sub class 'B' of old size 230 mm x 115 mm x 75 mm laid in trenches for cable protection all as specified and directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq.mm 2 core connected with suitable lugs, gasket including taking out the existing unserviceable cable all as specified and as directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq.mm 4 core connected with suitable lugs, gasket including taking out the existing unserviceable cable all as specified and as directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq.mm 4 core connected with suitable lugs, gasket including taking out the existing unserviceable cable all as specified and as directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq.mm 3.5 core connected with suitable lugs, gasket including taking out the existing unserviceable cable all as specified and as directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq.mm 3.5 core connected with suitable lugs, gasket including taking out the existing unserviceable cable all as specified and as directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq.mm 3.5 core connected with suitable lugs, gasket including taking out the existing unserviceable cable all as specified and as directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq.mm 3.5 core connected with suitable lugs, gasket including taking out the existing unserviceable cable all as specified and as directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq.mm 3.5 core connected with suitable lugs, gasket including taking out the existing unserviceable cable all as specified and as directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq.mm 3.5 core connected with suitable lugs, gasket including taking out the existing unserviceable cable all as specified and as directed.

Rollled mild steel work as in cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections of mild steel channel / angle iron / flat iron / round section of any size including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed including dismantling the existing and inclusive of one red oxide primer coat, one under coat and one finishing coat of aluminium paint complete all as specified and as directed

Pin type porcelain, vitreous white or brown insulator including one galvanized mild steel spindle, two galvanized iron washer and galvanized iron nut, size of insulator 100 mm height and 65mm dia suitable for 1100 volts grade supply including dismantling the existing complete all as specified and as directed.

Shackle type porcelain, vitreous white or brown insulator including one galvanized mild steel spindle, two galvanized iron washer and galvanized iron nut, size of insulator 75 mm height and 90mm dia suitable for 1100 volts grade supply including dismantling the existing complete all as specified and as directed.

Stay assembly complete with all accessories as shown in electrical plate No 1 of SSR Part-I consisting of stay rod 20mm dia, 1.80 mtr long stay plate 230 x 230 x 6 mm with nuts, bolts, insulator stay clamps etc.,complete all as shown on drawing and as directed. NOTE:-Excavation, stay wire , loop type insulator, stay clamps, excavation and concrete shall be measured separately.

Galvanised stay strand, 7/4mm complete all as specified and direccted.

Galvinised iron tubing, light grade, 40mm bore with all accessories for cable protection fixed on poles/buildings or laid in trenches including necessary MS clamps, bolts and nuts etc., including taking down the existing complete all as specified and as directed.

Galvinised iron tubing, light grade, 50mm bore with all accessories for cable protection fixed on poles/buildings or laid in trenches including necessary MS clamps, bolts and nuts etc., including taking down the existing complete all as specified and as directed.

Galvinised iron tubing, light grade, 80mm bore with all accessories for cable protection fixed on poles/buildings or laid in trenches including necessary MS clamps, bolts and nuts etc., including taking down the existing complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr, connected to galvanized strip 25 x 4 mm as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No. 3 of SSR Part-I 2010 and as specified or indicated including earth work and excavation in any type of soil, PCC (1:3:6) type C1 chamber, pre cast RCC slab 40mm thick in Reinforced Cement Concrete (1:2:4) type B1 with 8 mm dia TMT bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including test point and testing on completion complete all as specified and as directed.

Earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge not less than 1.5 m below ground level connected to earth lead by GI wire 4 mm dia by means of bolts nuts, check nuts, washers made out of galvanised iron connected to main switch all as shown in elect plate No 3 of MES SSR Part -I includingn excavation and earth work in any type of soil,funnel, 20 mm dia light grade GI watering pipe with chamber of PCC 1:3:6 type C1 40mm thick of size 450mm x450mm (1:2:4) type B1 for cover slab reinforced with 8mm dia TMT bars 10cm c/c both ways and with 6mm MS hook etc complete all as specified including testing on completion all as specified and directed.

Removal of existing ACSR conductors consisting of 6 lines at a distance of 30 mtr length in between the poles, tightening, restringing the same in between poles/insulators and connected with new binding wire, tightening to insulator including line clearence by pruning of tree branch approx 1 mtr apart from conductor and tightening the sides complete all as specified and as directed.

Replacemet of un serviceable existing /suitable size MCCBs 4 pole 415 Volts 50Hz including complete connections with incoming cable and out going cable with suitable thimbles and crimping the thimbles with crimping tools insulating the naked portion with insulation tape as under:- (a) MCCB 100 Amps 16 KA with fixed thermal and magnetic settings.

(b) MCCB 200 Amps 36 KA with fixed thermal and magnetic setting

(c) MCCB 250 Amps, 36 KA adjustable type with thermal and magnetic setting

(d) MCCB 315 Amps, 36 KA adjustable type with thermal and magnetic setting

(e) MCCB 63Amps 25 KA, TP fixed type with thermal and magnetic setting

LT 2 line separator, 230 volts, 50 Hz including dismantling the existing complete all as specified as directed

LT 4 line separator, 415 volts, 50 Hz including dismantling the existing complete all as specified as directed

Cable jointing kit suitable for 1.1KV grade cable for straight through joint complete with jointing material and accessories suitable for 3.5 core / 4core XLPE armoured aluminium conductor cable including taking down the existing for following sizes:- (a) 3.5 core x 25 to 35 sq.mm.

(b) 3.5 core x 50 to 120 sq.mm.

Painting of steel tubular poles of any height and type, including security light mounting brackets with one coat of aluminium paint with painting black and white strip or as ordered by Engineer-in-charge on poles up to 1.5 mtr high above coping level and numbering with writing letters or figures(Block), height not exc. 30 cm & letters or figures n.exc. 10 Nos complete all specified and as directed.

Dismantling of ACSR (Aluminium conductor steel reinforced) conductors all as specified and as directed.

ACSR (Aluminium conductor steel reinforced) conductor of any size on poles including binding wire of appropriate size complete including clearing of path and branch cutting of trees etc., all as specified and as directed

Refixing /Restringing of existing ACSR conductor connected with new existing wire tightening to insulator including line clearance by pruning of tree branch approx 1 m apart from conductor and tightening the sides complete all as specified and as directed.

Dismantling the unserviceble / damaged PCC / PSC / steel tubular poles of any size uncluding dismantling the foundation concrete and with proper finishing of the site all as specified and as directed.

Steel tubular poles complete with cast iron plate, finial tapper plug, bolts nuts & screws as per type 410 SP -31, 9 mtr long complete all as specified and as directed.

FRP moulded junction box with IP 65 protection of size 300x200x80mm with 32 Amps 4 way heavy duty terminal block with 6 Amps MCB SP and two number of cable entry gland of standard size with suitable MSclamps to fix with pole complete including taking down the existing complete all as specified and as directed.

Plain Cement Concrete, (1:3:6), type C1 using 20mm graded stone aggregate in copping of poles/filling road cutting, stays, including necessary form work all as specified and as directed.

Plain Cement Concrete, (1:4:8), type D2 using 40mm graded stone aggregate as in pole foundation, stay assembly, including necessary form work all as specified and as directed.

Outdoor type, double door sheet metal enclosure / junction box of size 800x800x300 mm with aluminium bus bar of 200 Amps capacity suitable for 3 phase & neutral including MCCB, 4 pole, 415 volts, 100 Amps, 16 KA including removing old unserviceable junction box complete all as specified and as directed.

Replacement of time line distribution board 32 Amps, 3 pole / 230 volts analog time switch including complete accessories relay contactor etc, timer with battery back up of 100 hours programme all as per Indo Asian Cat No. TL032AB0 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Cable fault finding in LT cables any sizes complete all as specified and as directed.

GI pipe bracket made of 40mm bore light grade GI pipe1.5 mtr long suitably bent to shape and fixed on wall/ pole for fixing street light fitting with 2 Nos suitable MS clamps of size 25 x 3 mm size incluiding bolts, nuts, washers all as specified and as directed.

60 Watt LED street light fitting with pressure die cast housing along with prismatic polycarbonate modular secondary lens optics with IP 66 ingress protection and impact resistance of IK 08. 4kV inbuilt and 10 kV external surge protection with top opening driver cover for easy maintenance all as per Bajaj, Cat No.:- ENXT P 72 L WH CR PC SD or techno commercially equivalent makes specified in PS including taking down old unserviceable street light fittings from pole complete all as specified and as directed.

90 Watt LED street light fitting with pressure die cast housing and toughened glass, individual LEDs with secondary lens optics with IP 66 ingress protection and impact resistance of IK 07. 5kV inbuilt and 10 kV external surge protection with top opening driver cover for easy maintenance all as per Bajaj, Cat No.:- BRTFG 90W LED CR or techno commercially equivalent makes specified in PS including taking down old unserviceable street light fittings from pole complete all as specified and as directed.

Replacement of 2 runs of PVC insulated 2.5 sq.mm single core multistranded copper conductor cable and one run of 2.5 sq.mm copper wire as earth continuity conductor drawn through and including rigid non metalic PVC conduit 20 mm external dia fixed on poles & connecting up all as specified and as directed. NOTE:- Two runs of cable and one run of earth wire and one run of conduit shall be measured as one length.

On load Change over switch 4 pole in sheet metal enclosure compact design rating 63Amps suitable for isolation and prevent leakage current/ flush over between phases, handle lock feature in off position with three padlocks all as per INDOASIAN Cat No. ITAS0063 or techno commercially equivalent makes specified in PS including taking down the existing complete all as specified and as directed.

On load Change over switch 4 pole in sheet metal enclosure compact design rating 400 Amps suitable for isolation and prevent leakage current/ flush over between phases, handle lock feature in off position with three padlocks all as per INDOASIAN Cat No. ICAS0400 or techno commercially equivalent makes specified in PS including taking down the existing complete all as specified and as directed.

Dismanling and taking down old unserviceable CFL type street light fittings of any type from Pole, removing the unserviceable CFL and replacement of new LED bulb 40 watt with suitable size holder and refixing in the existing/new location all as specified and as directed .

Dismanling and taking out the LED street light fittings of any make from pole and removing the burnt out /unserviceable LED driver 25 Watt to 60 Watt and replacement of new driver to make the fitting serviceable and refixing in the existing/new location all as directed.

Dismanling and taking out the LED street light fittings any make from pole and removing the burnt out /unserviceable LED driver 90 Watt and replacement of new driver to make the fitting serviceable and refixing the existing/new location all as directed.

Dismanling and taking out the flood light from high mast pole and removing the burnt out/unserviceable LED driver 200 Watt and replacement of new driver to make the fitting serviceable and refixing in the existing / new location all as directed.

200 Watt LED flood light luminaries with ultra sleek, light weight and with secondary optics, made of pressure die cast housings with IP 66 ingress protection and impact resistance of IK 07, 4kV inbuilt and 10 kV external surge protection, suitable for highmast lighting with complete accessories all as per BAJAJ, Code No. : BJFL 200W LED I or techno commercially equivalent makes specified in PS complete including taking down old unserviceable flood lights from high mast pole all as specified and as directed.

Painting of outdoor type feeder pillar panel upto the size of 1100 x 450 x 1200 mm (approx), including replacement of unserviceable door hinges with new one, applying one coat of smoke grey colour paint and base angle with black paint complete all as specified and as directed.

Painting of outdoor type LT panel upto the size of 2500 x 600 x 3000 mm (approx), including replacement of unserviceable door hinges with new one, applying one coat of smoke grey colour paint and base angle with black paint complete all specified and as directed.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including provision of HDPE pipe of 63mm dia bore suitable for 0.4 Mpa working pressure all as specified and as directed.

Supply, testing and commissioning in replacement of factory fabricated weather and vermin proof LT feeder pillar box. outdoor cubical / kiosk type CPRI approved, confirming to IS 5036 totally enclosed, made out of 3 mm thick sheet metal enclosure with angle iron frame of MS angle 50x50x6 mm suitable for operation on 3 phase, 4 wire, 440 volts 50 Hz system, with hinged panel, centre opening, front and rear opening doors (covers) with handles, each control switch to be fixed in each compartment with hinged door, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated, painted with one coat of red oxide primer and two coats of synthetic enamel paint of grey or any other approved colour and bus bar for phase & neutral 500 Amps, 36 KA capacity Contd/,,, 1.063

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq.mm 2 core connected with suitable lugs, gasket including taking out the existing unserviceable cable all as specified and as directed.

Maintenance, servicing, cleaning, descaling of solar water heating system complete of capacity 100/200 Ltr per day with 02 Nos of collector of any size 01 No of stainless steel tank and 01 No of plastic make up tank 500 Ltr by replacement of washers, gasket, adaptor and worn out nut bolt, GI fittings for water pipe line 20/25 mm dia for inlet and outlet of stainless steel tank/collector /water make up tank and making fully leak proof by brazing / welding of the inner container for arresting leakages complete and testing for satisfactory performance all as specified and as directed.

All as per Sl Item No. 1.064 above but of capacity 300 Ltr per day.

Stainless steel water heater tank suitable for solar water heater of capacity 200 LPD, type and thickness as per existing SS tank complete fixed in repairs all as specified and directed.

Replacement of black hose pipe suitable for 20/25mm dia hot/cold water pipe for solar hot water system all as specified and s directed.

Replacement of electric heating element 3KW, ISI Marked threaded /cup type to SS tank of solar water heating system 200 ltrs capacity with necessary fixtures including taking out unserviceable one complete all as specified and as directed.

Supply, installation, tesing and commissioning in replacement of lithium based solar security light system with built in battery, PV panel and LED lamp in FRP body including taking down of old unserviceable light fitting of any size/capacity complete system comprising of the following:- (a) PV Panel 30 W Monocrystalline. (b) Lithium cell for back up 15.4 AH with inbuilt BMS. (c) High brightness W-LED lamps 15W, CRI>700, CCT 6500K. (d) Microcontroller based charge controller cum diriver with automaic dimming function and operation. (e) Working temperature; (-) 10 degree C to (+) 55 degree C. (f) System shall be supplied with adjustable MS clamp and 40 mm dia arm suitable for pole/wall mounting complete with satisfaction of Engineer-in-Charge. Make:- Bajaj/Philips/Havells/Syska.

45 Watt post top LED light fitting, die cast aluminum graphite grey powder coated spigot, acrylic clear diffuser, spun aluminum power coated canopy, LED connected in series and paralled combination either better heat dissipation arrangement, LED colour 3000 K + 300K, open and short circuit protection, voltage surge protection 5KV, suitable for 60mm OD pipe entry with fixing bolts, IP-65 all as per Bajaj, Cat No :- BGCT W4 LED WH or techno commercially equivalent makes specified in PS including taking down old unserviceable light fittings complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m depth and not exceeding 1.5m width and getting out in soft/loose soil for laying of pipe lines complete all as specified as directed.

Taking up CI/DI water mains of 150 mm bore including all fittings with spigot and socket ends, lead joints / titan joints complete as specified as directed.

Ductile iron pipe 150mm dia (K-7 grade) conforming to IS: 8329-2000 with socket & spigot ends with inside surface of centrifugaly cast cement mortar lined, suitable for tyton rubber joint in any length laid in trenches complete all as specified and as directed.

Cutting the existing CI/DI pipe in position for insertion of CI/DI specials such as new Tees, branches etc of size 150 mm dia complete all as specified and as directed.

Cutting the existing CI/DI pipe in position for insertion of CI/DI specials such as new Tees, branches etc of size 100 mm dia complete all as specified and as directed.

Ductile Iron specials suitable for spigot and socket end pipes such as bends, pieces, collar, sockets caps and plugs etc., suitable for up to 150mm bore DI pipes complete all as specified and as directed.

Cast Iron specials suitable for spigot and socket end pipes such as bends, pieces, collar, sockets caps and plugs etc., suitable for up to 150mm bore CI pipes complete all as specified and as directed.

Run lead joints suitable for spigot and socket ends of Cast Iron pipes, fittings including spun yarn complete suitable for pipe of size150 mm dia complete all as specified and as directed.

Run lead joints suitable for spigot and socket ends of Cast Iron pipes, fittings including spun yarn complete suitable for pipe of size100 mm dia complete all as specified and as directed.

Run lead joints suitable for spigot and socket ends of Cast Iron pipes, fittings including spun yarn complete suitable for pipe of size80 mm dia complete all as specified and as directed. NOTE FOR Sl ITEM No.1.073 to 1.081:- Excavation and earth work shall be measured and paid separately.

Dismantaling the sluice valves of size 200mm dia bore in various locations and reconditioning the sluice valve by replacing SS spindle, spindle nuts with brass ring, gland nuts, gland packing etc., and refixing after carrying out repairs complete all as specified and as directed.

All as per Sl Item No. 1.082 here in before but for 150 mm dia bore.

All as per Sl Item No. 1.082 here in before but for 100 mm dia bore

All as per Sl Item No. 1.082 here in before but for 80 mm dia bore

Repacking stuffing box of sluice valves of 150 mm bore spindle including taking apart and reassembling complete all as specified and as directed.

All as per Sl Item No. 1.086 here in before but for 100 mm dia bore.

All as per Sl Item No. 1.086 here in before but for 80 mm dia bore.

Taking up or down the GI pipes / GI flanged pipes of 150mm bore with fittings and connected control gate valves / sluice valve / non return valve / foot valve etc., from sump / trenches / floors / roof complete all as specified and as directed.

All as per Sl Item No. 1.089 here in before but for 100 mm bore.

All as per Sl Item No. 1.089 here in before but for 80 mm bore.

All as per Sl Item No. 1.089 here in before but for 50mm bore.

All as per Sl Item No. 1.089 here in before but for 40 mm bore.

All as per Sl Item No. 1.089 here in before but for 25mm bore.

All as per Sl Item No. 1.089 here in before but for 20mm bore.

All as per Sl Item No. 1.089 here in before but for 15mm bore.

Galvanised iron tubing, 15mm dia, medium grade with all fittings such as unions, sockets, Tee etc including threading of GI pipes laid in trenches / fixed to walls, floorings, roof complete all as specified and as directed.

All as per Sl Item No. 1.097 here in before but for 20mm dia.

All as per Sl Item No. 1.097 here in before but for 25mm dia.

All as per Sl Item No. 1.097 here in before but for 40mm dia.

All as per Sl Item No. 1.097 here in before but for 50mm dia.

All as per Sl Item No. 1.097 here in before but for 80mm dia.

All as per Sl Item No. 1.097 here in before but for 100mm dia.

All as per Sl Item No. 1.097 here in before but for 150mm dia.

Laying only GI water tubing medium grade with all fitting such as unions, sockets, Tee etc including threading of GI pipes laid in trenches / walls of 15mm dia complete all as specified and as directed.

All as per Sl Item No. 1.105 here in before but for 40mm dia. NOTE : GI pipe as obtained here in before shall be re used.

3-layer PP-R Polypropylene random copolymer) pipes of 25mm outer dia SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply with all PP-R plain & brass threaded polypropylene random fittings laid in trenches, fixed to walls/ ceiling / flooring /wall complete all as per manufacture's instructions and as directed by Engineer-in-Charge. Make : SFMC / WETFLOW /SAFE (Manufactured by poineer)

Gun metal gate or globe valves 15 mm dia with iron wheel head, screwed both ends for iron pipe and fixed including taking down the existing valves complete all as specified and directed.

All as per Sl Item No. 1.108 here in before but for 20 mm dia.

All as per Sl Item No. 1.108 here in before but for 25 mm dia

All as per Sl Item No. 1.108 here in before but for 40 mm dia.

All as per Sl Item No. 1.108 here in before but for 50 mm dia.

All as per Sl Item No. 1.108 here in before but for 65 mm dia.

Dismantling old valve chamber complete with deteriorated MS cover and construction of brick massonry valve pit chamber of inner dimensions 1000 x 1000 x 1000 mm suitable for sluice valves upto 100mm size, with PCC (1:4:8) type D-2 for foundation, brick work in CM(1:6), 15mm thick rendering in CM (1:4) on internal and external surfaces, coping in PCC (1:2:4) type B-1, including necessary earth work, MS sheet cover of thickness 3.15mm made out of angle iron frames 50x50x6 mm as in double door type with hinges and locking arrangement with 4 leavers Godrej lock,75mm size duly painted with two coats of black bituminious paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling old valve chamber complete with deteriorated MS cover and construction of brick massonry valve pit chamber of inner dimensions 2000 x 2250 x 1150 mm suitable for sluice valves upto 100mm size, with PCC (1:4:8) type D-2 for foundation, brick work in CM(1:6), 15mm thick rendering in CM (1:4) on internal and external surfaces, coping in PCC (1:2:4) type B-1, including necessary earth work, MS sheet cover of thickness 3.15mm made out of angle iron frames 50x50x6 mm as in double door type with hinges and locking arrangement with 4 leavers Godrej lock,75mm size duly painted with two coats of black bituminious paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling old valve chamber complete with deteriorated MS cover and construction of brick massonry valve pit chamber of inner dimensions 2000 x 2500 x 1150 mm suitable for sluice valves upto 100mm size, with PCC (1:4:8) type D-2 for foundation, brick work in CM(1:6), 15mm thick rendering in CM (1:4) on internal and external surfaces, coping in PCC (1:2:4) type B-1, including necessary earth work, MS sheet cover of thickness 3.15mm made out of angle iron frames 50x50x6 mm as in double door type with hinges and locking arrangement with 4 leavers Godrej lock,75mm size duly painted with two coats of black bituminious paint over a coat of red oxide primer complete all as specified and as directed.

Sluice valve 150mm dia both side flanged and ISI marked (IS-780) of sluice valve cast iron body with brass spindle and brass fly nuts, class PN-1.6 and cast iron hand wheel and joining with nut, bolt, washers and rubber insertion packing 6mm thick etc including taking down the existing complete as specified and as directed.

All as per Sl Item No. 1.117 here in before but for 100 mm dia bore.

All as per Sl Item No. 1.117 here in before but for 80 mm dia bore.

Cast Iron foot valves, 150 mm dia with ISI mark embosed on it, with jointing materials etc, including taking down the existing vlaves complete all as specified and as directed.

All as per Sl Item No. 1.120 here in before but for 100 mm dia bore.

All as per Sl Item No. 1.120 here in before but for 80 mm dia bore.

PVC body float valve 20mm dia bore, with aluminium float rod and nylon float high presure type including removing old unserviceable float valve from service tank complete all as specified and as directed.

All as per Sl Item No. 1.123 here in before but for 25mm dia bore.

Taking out old unserviceable foot valve 100mm bore of any type from UG sump and removing unserviceable leather from suction line and replacement the same with high quality leather including nuts, bolts, washer etc and servicing complete all as specified and as directed.

All as per Sl Item No. 1.125 here in before but for 80mm dia bore.

Cleaning of UG Sump of following capacities by draining out water, removing the silt / mud from inside, cleaning the internal surfaces of wall / ceiling / floors by using wire brushes, removing silt / sludge, complete drying the floor area by cleaning with anti bacterial agent (solution to be prepared in water @ 0.20 Kg of bleaching powder/ washing soda per sqm of internal area) at internal surfaces for making bacterial free, applying two coats of white wash on whole internal surfaces including making necessary writing the details of date of cleaning of UG sump and next due date of cleaning with synthetic enamel white paint over one coat of black painted surface complete all as specified and as directed by Engineer-in-Charge. (a) Capacity of 50000 gallons at New TB - III

(b) Capacity of 10000 ltrs at New TB - III

(c) Capacity of 10000 ltrs at PAO (ORs) MEG

(d) Capacity of 5000 gallon at old TB - III Raw water P/H

(e) Capacity of 25000 gallon at Mandaly line P/H (MAP)

(f) Capacity of 25000 gallon at TB-I C Coy

(g) Capacity of 10000 gallons at FMME

(h) Capacity of 10000 gallons at Chaudhary line old P/H

(j) Capacity of 15000 gallons at 32 Key pers

(k) Capacity of 16000 gallons at PAO (ORs) PRTC

(l) Capacity of 15000 gallons at DIQA

(m) Capacity of 25000 gallons at TB - I P/H

(n) Capacity of 50000 gallons at TB - I P/H

(o) Capacity of 31000 gallons at KLP Pump house 2 Para (SF)

(p) Capacity of 33000 gallons at MAP Pump house 2 Para (SF)

(q) Capacity of 10000 gallons at 106 Inf Bn (TA)

(r) Capacity of 25000 gallons at 106 Inf Bn (TA)

(s) Capacity of 35000 gallons at PRTC Phase-I

(t) Capacity of 38000 gallons at Assaye Line

(u) Capacity of 80000 gallons at Depot Bn PH

(v) Capacity of 100000 gallons at Assaye Parade

(w) Capacity of 80000 gallons at ADMC PH-II

(x) Capacity of 100000 gallons at ML pump house

(y) Capacity of 300000 gallons at ADMC Phase - I

(z) Capacity of 150000 gallons at Assaye Parade

(aa) Capacity of 60000 gallons at Vasanth enclave.

(ab) Capacity of 50000 gallons at CICE.

(ac) Capacity of 96000 gallons Chaudhary line new P/H (MAP)

(ad) Capacity of 50000 gallons at old TB-III P/H

Cleaning of Over head tank / reservoir of any staging of following capacities by draining out water, removing the silt / mud from inside, cleaning the internal surfaces of wall / ceiling / floors by using wire brushes, removing silt / sludge, complete drying the floor area by cleaning with anti bacterial agent (solution to be prepared in water @ 0.20 Kg of bleaching powder/ washing soda per sqm of internal area) at internal surfaces for making bacterial free, applying two coats of white wash on whole internal surfaces including making necessary writing the details of date of cleaning of over head tank and next due date of cleaning with synthetic enamel white paint over one coat of black painted surface complete all as specified and as directed by Engineer-in-Charge. (a) Capacity of 60000 gallons at Vasanth enclave

(b) Capacity of 100000 gallons at New TB - III

(c) Capacity of 10000 gallons at old TB - III

(d) Capacity of 150000 gallons at ML Line PRTC

Capacity of 33000 gallons at MAP Pump house 2 Para (SF)

(f) Capacity of 100000 gallons at Depot Bn

(g) Capacity of 100000 gallons at TB- I P/H

(h) Capacity of 80000 gallons at Depot Bn

(j) Capacity of 50000 gallons at Assaye line

(k) Capacity of 50000 gallons at New TB - III

(l) Capacity of 35000 gallons at MI Line

(m) Capacity of 50000 gallons at Assaye line

(n) Capacity of 25000 gallons at New TB-III

(o) Capacity of 25000 gallons at TB-I C Coy

(p) Capacity of 15000 gallons at 106 Inf Bn (TA)

(q) Capacity of 21000Ltrs AT Mandaly line Old TB-III

(r) Capacity of 10000 gallons at TB III C/Line

(s) Capacity of 31000 gallons at KLP Pump house 2 Para (SF)

Non return valve, 150mm dia bore, flanged and drilled type with complete fixing accessories like nuts, bolts, packing material etc including taking down existing valves complete all as specified and as directed.

Non return valve, 100mm dia bore, flanged and drilled type with complete fixing accessories like nuts, bolts, packing material etc including taking down existing valves complete all as specified and as directed.

Non return valve, 80mm dia bore, flanged and drilled type with complete fixing accessories like nuts, bolts, packing material etc including taking down existing valves complete all as specified and as directed.

Sluice valves 200mm bore, both side flanged, ISI marked (IS-780) of sluice valve cast iron body with S/S spindle, brass fly nuts, class PN-1.6, cast iron hand wheel and jointing with nut, bolt, washers and rubber insertion packing 6mm thick etc, including taking down existing valves complete all as specified and as directed.

Cast Iron foot valves, 200 mm dia with ISI mark embosed on it, with jointing materials etc, including taking down the existing vlaves complete all as specified and as directed.

Cast Iron foot valves, 150 mm dia with ISI mark embosed on it, with jointing materials etc, including taking down the existing vlaves complete all as specified and as directed.

Cast Iron foot valves, 100 mm dia with ISI mark embosed on it, with jointing materials etc, including taking down the existing vlaves complete all as specified and as directed.

Cast Iron foot valves, 80 mm dia with ISI mark embosed on it, with jointing materials etc, including taking down the existing vlaves complete all as specified and as directed.

20mm bore dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs complete all as specified and as directed.

25mm bore dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs complete all as specified and as directed.

Butterfly valve of size 65 mm dia both side flagned with handle for locking and joining with nut, bolt, washers all as existing one including taking down existing complete all as specified and as directed.

Sahara Engineers