Extension of EMDBS into EMRS under phase - II at Peepalkhunt Distt. Pratapgarh

Amount

Knock down class room dual desk is specially designed for rugged use. The desk are made of pressed formed MS CRCA section & CRCA tube fitted with pre laminated Particle board top, seat & back with Machine pressed PVC egde banding 2 mm thick glued with industrial adhesive and diffused with board monolithically. hook for water bottle and bag. The overall appearance of the product shall be as per indicative potographs attatched: DESK TOP-18mm Both Side laminate(BSL) PreLam Partical Board 400 mm wide BENCH TOP-18mm Prelam Partical Board 330 mm widdh SHELF-18mm Prelam Partical Board 300(Wide)mm. BACK-18mm Prelam Partical Board 250(W)mm. Modesty-18mm Prelam Partical Board 300 (W)mm. Supporting Understrucure- Left Hand and Right Hand FRAME consisting of vertical, horizontal and Cross Member made up of 25 x 1.2 mm dia tube confirming to IS Grade 4932 and shall be finised with epoxy polyster powder coated finish with DFT 50-60 Micron confirming IS 13871:1993. The support system of Bench and Shelf shall also made up of made up of 25 x 1.6 mm dia ERW tube confirming to IS Grade 4932 and shall be finised with epoxy polyster powder coated DFT 50-60 Micron confirming IS 13871:1993.. Legs shall be fitted with PVC Leveler. Construction is Semi knock down form .The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for EDUCATIONAL FURNITURE range for ergonomic design.

TWO SEATER 1050Wx915D x750 H-Desk Depth 400 mm. Seat Height 450 mm for Class 9-12)

Supply and Installation of Office table as per approved design and as directred by Engineer-in-charge Work Top-Work top shall be made 25mm thick Pre-lam MDF board confirming to IS 12406:2003 with post foming on front and back and machine pressed PVC egde banding 2 mm thick glued with industrial adhesive and diffused with board monolithically on other two sides Understructure- C-type leg shall be made of 50X50X1.6mm thick vertical member and 40x40x1.6mm thick M.S. pipe of Horizontal/Cross member confirming 15-Grade 4923 shall be finised shall be finised with epoxy polyster powder coated DFT 50-60 Mieron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross members shall be mounted by end brackets made of 3mm thick 15 513: 2008 CRCA sheet shall be finised with epoxy polyster powder coated DFT 50-60 Micron confirming IS 13871:1993. Wire management-Electrical wires shall be carried from horizontal/ vertical duct made of 0.7mm CRCA sheet confirming to 15 513:2008. Switch Plate or Cromet depending upon requirement shall also be provided for electrical/LAN connection on table top. Modesty Panel-Modesty Panel of height 450 mm shall be made of 1.2 mm thick CRCA sheet confirming to I5 513: 2008 and shall be finised with epoxy polyster powder coated DFT 50-60 Micron. Side Storage body-Storage top shall also be made of 25mm thick Pre-lam MDF board confirming to IS 12406:2003 with post forming on two sides and machine pressed PVC egde banding 2 mm thick glued with industrial adhesive and diffused with board monolithically on other two sides. The body of storage units shall be made of 0.8mm thick CRCA Sheet and skirting shall be of 1.2mm thick CRCA sheet confirming to 15 513: 2008 finished with epoxy powder coated of DFT 50-60 Micronconfirming IS 13671:1993. Internal Shelves shall be also made up of 0.8mm CRCA sheet confirming to 15 513: 2008 and shall be mounted with the Metal shelf support pin made of 2mm thick CRCA sheet with Nickel or Chrome plating. M10 screw leveler is given with height adjustment up to 12mm to 15mm. Back storage should be in complete18 Prelam particle board matching with similar colour shade : structure made in 18 mm plpb The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for EDUCATIONAL FURNITURE range for ergonomic design.

Main table size 1800 x 750 x 750, Side storage 900 x 450 x 750, Back storage 1800 x 450 x 750,

Main table size 1650 x 750 x 750, Side storage 900 x 450 x 750, Back storage 1800 x 450 x 750,

Main table size 1350 x 750 x 750, Side storage 900 x 450 x 750

Office Table made of Pre-laminated table top of size 1200 X 590 X 735 mm with one drawer unit made of 0.5mm thick CRCA sheet. The table top shall be supported over legs consists of MS ERW round tube of 25.4 x 1.2mm and Cross Horizontal Members including Leg rest of 25.4 x 1.2 mm ERB tube. All steel components be shall be finised with epoxy polyster powder coated 50-60 Micron.The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for EDUCATIONAL FURNITURE range for ergonomic design.

Supply and installation of 12 Seater Meeting Table of of overall size 3600 x 1350 (Avergae) x 750 mm (Knock down construction). Table Top and Gable End shall be made of 25mm thick Pre-Laminate Partical Board with 2mm thick Machine pressed PVC edge banding glued with industrial adhesive and monolithically diffused. Supporting Understrucur consists of 2 Metal C Legs on either ends of table support frame made of 50 x 50 x 1.6 mm MS ERB tube and One number Wire Carrier leg at middle of 50X50X1.6 mm. 4 numbers Horizontal connector of 40mm X 40mm X 1.6mm thick MS Pipe between supporting vertical legs. All The MS Pipes and Sheet shall be finished with epoxy powdercoated of DFT 50-60 Micron. C typed metal legs shall be kept 150 mm inside from from end of table. WIRE MANAGEMENT- The Vertical (snake) & Horizontal(cable tray) wire carriers are placed below worktop, made up of CRCA with epoxy powder Coating & Fixed to the understructure with specially designed brackets. Provision of placing switch plates/Cromet in the cable tray.The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for EDUCATIONAL FURNITURE range for ergonomic design.

Supply and Istallation of Library Table in sizes of 2400 L x 900 W x 750 H mm consisting of follwing specification:- Work Top- Work top shall be made 25mm thick Prelam (One Side laminated) particle board confirming to IS 12823: 1990 post formed edge moulding on two sides and 2 mm thick Machine pressed PVC edge banding glued with industrial adhesive on other two sides. Understructure Supporting frame consists of two Metal C Legs on either ends of table made up of 50X50X1.6 mm and are joined by two numbers Horizontal connector made of 40mm X 40mm X 1.6mm thick MS Pipe between supporting vertical legs. All Metal Pipes and Sections are made up of CRCA steel confirming to 15 513:2008 and shall be shall be finised with epoxy polyster powder coated OFT 50-60 Micron. C typed metal legs shall be kept 150 mm Inside from from end of table. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm( Payment Shall be per running metre length)

Supply and Istallation of Computer Work Station of unit Size 750 mm X 600 mm X 750 mm. Work Top- Work top shall be made 25mm thick Prelam particle board confirming to IS 12823: 1990 with post formed edge moulding on one side and 2 mm thick Machine pressed PVC edge banding glued with industrial adhesive and monolithically diffused with board on other three sides. Understructure supporting frame consist of Metal C Legs type made up of 50 x 50 x 1.6 mm and Wire Carrier leg of 50X50X1.6 mm in placed alternatvely and are connected with horizontal cross connectors of of 40mm x 40mm X 1.6mm thick MS Pipe between supporting vertical legs. The MS Pipes shall be finished with epoxy powdercoated with DFT of 50-60 Micron confirming to IS 13871:1993. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm. Wire management-The Vertical/Electrical duct & Horizontal Cable tray (wire carriers) are made of CRCA & fixed to the understructure below worktop with specially designed brackets. Provision for fixing Switch plates are privided in the cable tray for easy access through wire mangaer or PVC grommet. Screens/privacy panel:- Screen height will be 300 above work-top made of prelam particle board/White Board alternatively as approved by Engineer-in-Charge.

Supply and Istalltion of Library Open book Shelf (Single Side )of Sizes 1800 mm x 900 mm x 316 mm body made up of of 0.8mm thick CRCA Sheet and skirting of 1.2mm thick CRCA sheet confirming to IS 513: 2008 with epoxy powder coated finish (DFT minimum 50-60 micron). Shelves shall also be made up of 0.8mm CRCA sheet confirming to IS S13: 2008 and fixed with CRCA sheet brackets of approved design. Number of adjustable shelf shall be five with six loading levels. Load bearing capacity of the shelf shall be 30Kgs UDL. The construction shall be aesthetically appealing completely welded. M10 screw leveler is given with height adjustment up to 12mm to 15mm

Overall Size 915W x 485D x 1980H . Office Almirah Made Of Prime Quality CRCA Ms Sheet Panels 0.8mm Thick Powder Coated Finish With Approved Shade . Each Shelve Made Of 0.8mm CRCA MS Sheet Powder Coated . Each Shelve Shall Be Formed Such The Edges Are Bend Two Times At Right Angle. Front Shutter 1mm Thick CRCA Ms Sheet Powder Coated Riveted With Hinges. . No Sharp Edges Of Almirah Ends . Glass Thickness Shall Be 3.5mm . Glass Shall Be Fitted In Additional Shutter Frame From Inside . Leg Shall Be 125 x 90 X 452MM 2 Nos . Door Die cast Chrome Plated Handles Fitted With Washer & Double Nut . Handles Ring Made Of PVC Cap . Locking Bright Bar 10mm Dia . Almirah All Metallic Panels Screw With Nut & Bolt . Bottom Shelve 125mm High Up To Ground. All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations. CO2 Welding Shall Be Used. All Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil,Grease, Dust, And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² . Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for STORAG FURNITURE range for ergonomic design.

Overall Size 915W x 485D x 1980H . Office Almirah Made Of Prime Quality CRCA Ms Sheet Panels 0.8mm Thick Powder Coated Finish With Approved Shade . Each Shelve Made Of 0.8mm CRCA MS Sheet Powder Coated . Each Shelve Shall Be Formed Such The Edges Are Bend Two Times At Right Angle. Front Shutter 1mm Thick CRCA Ms Sheet Powder Coated Riveted With Hinges. . No Sharp Edges Of Almirah Ends . All Shelve Rack Divided Into Equal Parts . Leg Shall Be 125 x 90 X 452MM 2 Nos With 1mm Thick CRCA Metal Sheet Powder Coated . Door Die Cast Chrome Plated Handles Fitted With Washer & Double Nut . Handles Ring Made Of PVC Cap . Locking Bright Bar 8-10mm Dia . Almirah All Metallic Panels Screw With Nut & Bolt . Bottom Shelve 125mm High Up To Ground . All Metal Pieces Shall Be Welded Properly Strongly and conformity with regulations . CO2 Welding Shall Be Used . All Metal Shall Be Coated After Being Treated With At Least Three Stages And Cleaned From Oil,Grease, Dust, And Other Dirt Using Special Thermal Control Coating For Metal Furniture To Form a Layer Of Base Coating Of (iron phosphating) (0.4 – 0.8) gm/m² . Automatic Spray Coating Shall Be Applied To Be Followed By a Drying Process In a Thermal Furnace With Suitable Temperature And Time For The Process . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for STORAG FURNITURE range for ergonomic design. The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for EDUCATIONAL FURNITURE range for ergonomic design.

Bed Overall Size : 2005 mm Lx 950mm W X 650mmH1X400mmH2, Headrest of size 280mm Made in 1mm Sheet and footside sheet panel made in 1mm also provided as per attached image : 12-14mm MR grade Ply will be used for mattress. Bed leg framein 50x25x1.2 mm and Mattress panel will be supported on minimum 3 supports combination of size 25x25x1.2mm & 20x20x1.2mm pipes : Mattress panel height should be 400mm . Complete structure should be duly powder coated

Hard foam mattress with 40 density size 1750 x 820 x 100 mm of standard size : with pillow & cotton bedsheet

Metal Table with Integrated Storage 1750(L)x 600(W) x 750(H) for two students Work Top Shall be made up of 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with post formed edge moulding on one side and 2 mm thick Machine pressed PVC edge banding glued with industrial adhesive and monolithically diffused with board on other three sides. Supporting Strucure of table top consits of 4 vertical Legs of ERW tube 40x40 x 1.6 mm and one storage unit at middle. The vertical legs are connected with 2 cross horizontal members of size ERW Tube of 40 x 40 x 1.6 mm provided at top a. The table shall have provisions of foot rest made up of 25 x25 x1.2 mm ERW pipe fitted in between two vertical legs and also support the storgae unit & acts as bracing member. All ERW pipes are pipe shall to confirm to IS grade IS 4923 and shall be finised with epoxy polyster powder coated DF7 50-60 Micron Confirming IS 13871:1993. Drawer Unit: SPECIFICATIONS:-> Table shall have 2 numbers of Metal Storage consiting of Shutter of size consiting of 350 (W) x 550 (D) x 280 (H) mm Pad Lock provision as per attached image . All metal component including shutter and Shelf shall be made of 0.8mm thick CRCA confirm to 15 grade 15 4923 and shall be powder coated with epoxy powder coating of 50 micron DFT Confirming IS 13871:1993.

SS Dinning Table consists of Dinning Top is made up of and 1 mm thickness Stainless steel sheet of SS 304 Grade with overall dimension of 2400(L) X 760(D) X 750(H). The table top is rainforced with a 18 mm PLP Board. Dinning top sheet shall be extended to the sides for a depth of 24 mm in all directions including, edge rounding, grining and finishing,etc all complete. The Table top shall finish in such a manner to avoid any sharp edges. Stool Seats are made of 300 mm dia SS 202 Grade formed Plates of 1 mm thickness welded over 3 mm thick MS Plate. Supporting understrucure of table consists of 4 nuber C legged frame made up of 40 x40 x1.6 mm ERW tube and are connected to 6 numbers horizontal members of MS ERW tube 40 x 40 x 1.6 mm. The supporting vertical member of each stool seat consists of MS ERW tube 40 x 40 x 1.6 mmn and is connected to Clegged frame of table top. All Metal components of entire assebmly confirm to IS 4923. Both the horizontal and vertical pipes are welded together by MIG welding confirming to IS standard IS 816:1969 and is tested for welding confirming to IS 822:1970. All CRCA Componets would be shall be finised with epoxy polyster powder coated DFT 50-60 Micron confirming IS 13871:1993. Understructure height will be 725mm from the ground, and the stool height will be 500mm from the ground..The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for EDUCATIONAL FURNITURE range for ergonomic design.

Dinning Table consists of Dinning Top is made up of and 1 mm thickness Stainless steel sheet of SS 304 Grade with overall dimension of 1800(L) X 760(D) X 750(H). The table top is rainforced with a 18mm PLP Board. Dinning top sheet shall be extended to the sides for a depth of 24 mm in all directions including, edge rounding, grining and finishing,etc all complete. The Table top shall finish in such a manner to avoid any sharp edges. Stool Seats are made of 300 mm dia SS 202 Grade formed Plates of 1 mm thickness welded over 3 mm thick MS Plate. Supporting understrucure of table consists of 3 nuber C legged frame made up of 40 x40 x1.6 mm ERW tube and are connected to 4 numbers horizontal members of MS ERW tube 40 x 40 x 1.6 mm. The supporting vertical member of each stool seat consists of MS ERW tube 40 x 40 x 1.6 mmn and is connected to C legged frame of table top. All Metal components of entire assebmly confirm to IS 4923. Both the horizontal and vertical pipes are welded together by MIG welding confirming to IS standard IS 816:1969 and is tested for welding confirming to IS 822:1970. All CRCA Componets shall be finishded with epoxy polyster powder coated DFT 50-60 Micron confirming IS 13871:1993. Understructure height will be 725mm from the ground, and the stool height will be 500mm from the ground.. Supply and installation of In

Supply and installation of Lab Stool Seat made up of 300 mm dia SS 202 Grade formed Plates of 1 mm thickness welded over 3 mm thick MS Plate. The Stool seat is supported by four legs 19x19x1.2mm SQUARE Pipe. Stool shall be provided with foot rest made of 19 x 19 x 1.2 mm thick MS Tube at a height of 100 mm from ground. Height of stool is st from the ground shall be 540. Legs are provided with PU/PVC leveller at the bottom. All MS CRCA Componets are confirming to IS 4932 and finished with epoxy powder coated finish (DFT Minimum 45 micron) Confirming IS 13871:1993.

HB H : 1140 ±10 X W : 715 ±10 X D : 715 ±10 . High Back Chair Made Of Good Quality Products Of MSPL Standard Models . Seat Plywood Made Of 12mm Hot Pressed . Upholstery PVC Structure Moulded With Prime Quality High Stretch Knitted Polyester Fabric . PHA ( Gas-Lift ) 85mm (TDC 152mm & BDC 67) . Seat & Back Are Firmly Connected To The Base Frame Machanism Moves In The Ratio 1:2 . Machanism Provided Upright Position Locking . Chair Max Height 1140 & min Height 1055 . 470W x 480D Base Seat 60mm Thick Moulded With PU Foam & 510W x 640H Back Seat 60mm Thick Moulded With HD Foam. 220x500/640 Arm Rest Fitted To The Seat With Armrest Connecting Brackets. Tilt Adjustment Can Be Operated In Seating Position . Armrest Should Be Injection Moulded From Black Nylon . Height From Seat To Ground 450mm. Seating Height Can Be Adjusted With a Pneumatic Gas Lift . Pedestal Pitch Centre Dia 665mm Without Casters. Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia . Pedestral Pitch Centre Dia 665mm Without Casters . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.

MB H : 1010 ±10 X W : 715 ±10 X D : 715 ±10. Medium Back Chair Made Of Good Quality Products MSPL Standard Models . Seat Plywood Made Of 12mm Hot Pressed . Upholstery PVC Structure Moulded With Prime Quality High Stretch Knitted Polyester Fabric . PHA ( Gas-Lift ) 85mm (TDC 152mm & BDC 67) . Seat & Back Are Firmly Connected To The Base Frame Machanism Moves In The Ratio 1:2. Machanism Provided Upright Position Locking . Chair Max Height 1010 & min Height 925 . 470W x 480D Base Seat 60mm Thick Moulded With PU Foam & 510W x 510H Back Seat 60mm Thick Moulded With HD Foam . Tilt Adjustment Can Be Operated In Seating Position . 220x500/640 Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Armrest Should Be Injection Moulded From Black Nylon . Height From Seat To Ground 450mm . Seating Height Can Be Adjusted With a Pneumatic Gas Lift . Pedestal Pitch Centre Dia 665mm Without Casters . Casters Made Of Moulded Black Nylon Metal Bolt Inserted & Fitted With 5 Nos . Twin Wheel Casters 50mm Dia . Pedestral Pitch Centre Dia 665mm Without Casters . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.

Visitor Chair Made Of Good Quality Products MSPL Standard Models . Seat Plywood Made Of 12mm Hot Pressed . Upholstery PVC Structure Moulded With Prime Quality High Stretch Knitted Polyester Fabric . Seat & Back Are Firmly Connected To The Base . Chair Max Height . Base Seat 60mm Thick Moulded With PU Foam &Back Seat 60mm Thick Moulded With HD Foam . Arm Rest Fitted To The Seat With Armrest Connecting Brackets . Armrest Should Be Injection Moulded From Black Nylon . The product should bear IGBC Green Pro certificate for product category. And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for OFFICE FURNITURE range for ergonomic design.

1)SEAT/BACK ASSEMBLY: The seat and back should be made from 1.0±0.1cm. thk. hot pressed ply and should be true resistant tant commercial plywood and upholstered with P.U. foam and fabric. BACK SIZE: 42.0cm. (W) X 26.5cm. (H) SEAT SIZE: 42.0cm. (W) X 42.0cm. (D) 2)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should be moulded with density =45+1-2 kg/m3 and Hardness load 16 ± 2 kgf for 25% compression. 3)UNDERSTRUCTURE ASSEMBLY: The assembly should be a mainframe made of 0 1.95 ±0.03cm. x 0.16 ±0.016cm.thk. M.S. E.R.W. tube and a welded leg tube made of dia. 0 1.95 ±0.03cm. x 0.16 ±0.016cm.thk. M.S. E.R.W. tube to the form the complete assembly which should be black powder coated (DFT 40-60 microns).

Supply and installation of Metal Lockers with Cam Lock-381W x 3810 x 1831H with 4 Lockers. Body-LH and RH Side and back panel is made up of 0.8mm thick CRCA sheet confirming to IS 513:2008 which is having standard dimension 1831 x380mm. Shelf hanging bracket is welded on both the side panel by spot welding. Shelf hanging bracket is made up of 0.8mm thick CRCA sheet confirming to IS 513:2008. front frame top and bottom part made up 0.8mm thick CRCA sheet confirming to IS 513:2008 and horizontal part is made up 1mm thick CRCA sheet confirming to IS 513:2008. On a front frame horizontally provision is given at a common distance to hold shutter bracket. Locker's top is made up of 0.8mm thick CRCA sheet confirming IS 513:2008 which is having standard dimension 375 x378mm. Shelf is also made up of 0.8 mm CRCA sheet confirming to IS 513:2008. Shutter-Is made up on 0.7mm thick CRCA sheet confirming to IS 513:2008. All the shutter are hung on shutter pin , perforations louvers are given shutter for air flow. PVC flush handle and name plate is used for handling and for name plate tagging. Standard PAD/CAM lock is used for locking each shutter. Powder coated with epoxy polyester powder coating of DFT 50-60 Micron confirimg to IS 13871:1993.

Surface: Magnetic white board marker surface. Inner Core: Hard smooth particleboard. Back: Laminated sheet. Frame: Anodized aluminum. Corner: ABS Plastic, Mounting Hardware

100% spotless, 100% scratch-free & 100% warp-free non-fading high adhesion melamine high-pressure laminate (HPL) writing surface, designed specifically for writing application by Scholar Art. Premium heavy-duty alloy aluminium 6063-T6 frame with top-end satin finish anodizing, for maximum bending strength and superior aesthetics. Ensures maximum readability with minimum glare from all angles, with clean & continuous lines of chalk. An easy-wipe, non-fading & non-corrosive surface for hassle-free and total cleaning without formation of ghost marks. Ultra-light thermocol (EPS) core for a 100% flat and 100% even writing surface. Virgin ABS (high-strength & low-gloss) corners for a seamless finish & superior looks

SS STOCK POT RANGE: 16 gauge SS 304 top with all sides turned down 50mm and in 12mm. The top is secured to MS welded frame of 38mm x 38mm x 3mm section. All exterior cladding in SS 304 20 gauge. 1 Nos of 400mm x 400mm cast iron removable grate ,1 Nos burner .Dip tray in 20 gauge SS with handle to integrated handle to be provided. Control regulator to be provided .Body fixed to 38mm square or round pipes with adjustable bullet feet.(Overall Size 24'' x 24'' x 26'')

SS 2 BURNER INDIAN COOKING RANGE: 16 gauge SS 304 top with all sides turned down 50mm and in 12mm. The top is secured to MS welded frame. All exterior cladding in SS 304 20 gauge. 2 Nos of 400mm x 400mm cast iron removable grate ,2 Nos burner .Dip tray in 20 gauge SS with handle to integrated handle to be provided. Control regulator to be provided .Body fixed to 38mm square or round pipes with adjustable bullet feet. (Overall Size 44'' x 24'' x 34'')

SS SINGLE SINK UNIT: 16 gauge SS 304 top with rear splash. The top is secured to SS welded frame. A 16 gauge SS 304 sink of size 450 mm x 450mm x 250mm deep with waste outlet to be provided. The sink is fixed to 38mm square or round pipes with adjustable bullet feet.(Overall size 24'' x 24'' x 34'')

SS TILTING BULK COOKER: LPG Operated SS Tilting Type Bulk Cooker with double body insulated SS 304 tank .The inner and outer thickness to be in 16-18 gauge.Top lid in 18 gauge SS 304 with handle and spring. The outer control body panels in SS 304 20 gauge .The cooker should have a tilting mechanism with wheel & gear arrangement. One inlet to be provided with tap .A high pressure burner to be included. 50mm x 50mm SS square/round pipe stand to be provided.(Capacity 200 liters)

SS SPICE TROLLEY: 16 gauge SS 304 top with all sides turned 50mm up .2 Nos of shelves in SS 304 18 gauge to be provided .The Spice trolley would have 100 mm dia castor wheels .(Overall Size 18'' x 24'' x 34'')

SS WORK TABLE WITH SHELF: 16 gauge SS 304 top with all sides turned down 50mm and 12mm in . An 18 gauge SS 304 shelf to be provided fixed to 38mm SS square/round pipe with adjustable bullet feet.(Overall Size 44'' x 24'' x 34'')

CHAPATI HOT PLATE: 12 mm thick MS plate with provision of puffer plate on top.The exterior boxing to be made in 20 gauge SS 304 cladding.Complete unit to be fixed to 38mm SS square/round pipe with adjustable feet. 4 Nos of high pressure burner with pressure control regulator to be provided.(Overall Size 52'' x 26'' x 34'')

SEMI AUTOMATIC CHAPATI MAKING MACHINE:Gas and electic function having capacity to make 800-1000 pcs per hour.

TOASTER CONVEYER TYPE : Power : 1.5 KW, 220V

DEEP FREEZER: 500 ltr capacity with hard top opening having 50mm thick puff instillation.

DRY MASALA GRINDER: Capacity : 5 kg with .5 HP motor

PULVERISER: with motor capacity of 2HP

DOUGH KNEADER: Capacity: 20 ltrs, with 2 HP motor

BAINMARIE WITH 1/1 GN PAN 6 VESSEL: Top in 16 gauge secured to SS welded frame. 6 Nos of 1/1 GN pan with lid to be provided .The bainmarie to have heating element ,electrical panel with thermostat,on /off switch and light indicator. A bottom shelf in 18 gauge SS 304 to be provided secured to 38mm square or round pipe with adjustable bullet feet. (Overall size 84'' x 26'' x 34'')

SS PLATFORM TROLLEY: The top should be in SS 304 grade of 16 gauge secured to 4 Nos of 100mm diameter castors. (Overall size 34 x 24 x 34)

SS 304 KITCHEN UTILITY TROLLEY: 16 gauge SS 304 top with all sides turned up 50mm . 2 nos of 18 gauge SS 304 shelf to be provided secured to 100mm dia castor wheels.(Overall Size 34'' x 24'' x 34'')

SS 304 POT RACK - 4 SHELF: 38mm x 38mm SS 304 square/ round pipe uprights secured to horizontal sections of 20mm x 20mm square/round pipes making 4 shelves.The uprights will have PVC adjustable bullet feet. (Overall Size 60'' x 30'' x 66'')

SS 304 STORAGE RACK - 4 SHELF:38mm x 38mm SS 304 angle uprights secured to PVC adjustable bullet feet. 4 Nos of 18 gauge SS shelves to be welded to the uprights (Overall Size 44'' x 16'' x 66'')

PVC PALLET : having overall size 1200mm x 1000mm x 150mm

POTATO PEELER: Capacity : 20kg with Power : 2 HP

SS 304 HOOD WITH SS FILTER: Overall body in SS 304 grade in 22 gauge welded body construction. Removable 20 gauge filters provided. Provision for ceiling mounting with hanger rods. (Overall size 54''x30''x24'')

SS 304 HOOD WITH SS FILTER: Overall body in SS 304 grade in 22 gauge welded body construction. Removable 20 gauge filters provided. Provision for ceiling mounting with hanger rods. (Overall size 36''x30''x24'')

GI DUCTING WITH HOT AIR SUCTION: Overall body of ducting done in 22 gauge GI sheet.Necessary grills in 20 gauge for air ventallation included.

CENTRIFIGUAL DUCTING FAN: 5 HP centrifigual blower motor for exhaust

LPG MAINFOLD SYSTEM : 20 cylinder LPG gas manifold system with with complete set of fixtures without pipeline.

LPG GAS PIPELINE : 1/2" Dia LPG pipeline from mainfold to all LPG equipments

M/S RAMESHWAR LAL MANARAM

MUDIT CONSTRUCTION

Dullar Real Estate Pvt. Ltd

KCC INFRA PVT LTD

Girraj const. co.

KCC INFRA PVT LTD

Agarwal Construction company

Girraj const. co.

MUDIT CONSTRUCTION

M/S RAMESHWAR LAL MANARAM