LANDSCAPING OF AREA AT SHAURYA VIHAR, INS UTKROSH, SRI VIJAYA PURAM

M&L for supply, stacking and spreading of good soil well seived 90% to pass through IS seive of 10 mm size free from stone rubbish and lumps, Stone, roots and other foreign materials complete all as specified and as directed.

Supply and planting of best quality plants at site in 0.3 mx 0.3 m x 0.3m pit filling the pit with fresh garder soil/ silt sand & locally available manure in ratio of 1:3. The height of the plants should not less than 0.9mt in height complete all as specified and as directed.

Zinnia

Daisy

Dahlia

Marry Gold

Hydrangea

Exrora

M&L for supply and spreading at site well decayed locally available vermi compost well dried ,wellpowderd, without clouds and free from stones and other rubbish materials vermi compost will be measured by measuring bags 25 Kg weight on site all as directed by Engr-in-charge.

M&L for supply and spreading for providing of river sand from main land .sand shall not contain any pebble or stonesor sea shell any vegetration leaves/branches/roots of tre and shall not contain silt more than 50% complete all as specified and as directed.

Supply and planting best quality of yellowish dhurinda hedges of height not less than 0.60 mt at site complete all as directed

Supply and planting best quality of Red hedges of height not less than 0.60 mt at site complete all as directed

Supply and planting best quality of Green hedges of height not less than 0.60 mt at site complete all as directed

Supply and spraying at site medicine and insecticides for planting as required complete all as directed

Forming embankments including raising or lowering CUM earth,spreading in layers n.exc.30cm thick, watering, amming/rolling and finishing to required size, shape n.exc 1.50 metre high from base all as specified and as dirceted.

Excavating over areas not exceeding 1.5m deep and getting out in Hard/dense soil complete all as specified and directed.

M&L for hard core of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled / rammed to a true surface complete all as specified and as directed.

M&L 100mm cement concrete type C-2 ,1:3:6 (40mm graded aggregate) in sub floors,sub bases,floors and pavings etc all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed.

Removal of excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.

M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:4) all as specified.

M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces and finishing the top surface even and fair without using extra cement complete all as specified and as directed.

M&L for plain cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in copings cavings, bed plats and embeding swan neck fencing post, etc incl weathering slightly rounded or chamfered angles and throating as directed complete all as specified and directed.

Please Enable Macros to View BoQ information