Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.4 LAccepted-AOC P 45 KHIRODE VIDYA BINOD AVENUE KOLKATA 700003 | KOLKATA | WEST BENGAL | 700003 | L1 | Accepted-AOC Being a lowest bidder and reasonable | |
| 2 | L2₹52.6 L+₹3.1 L (6.34%)Rejected-Finance 72 A ABINASH CHANDRA BANERJEE LANE KOLKATA 700010 | KOLKATA | WEST BENGAL | 700010 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹54.8 L+₹5.3 L (10.8%)Rejected-Finance 107 1A TOLLYGAUNG ROAD KOLKATA 700026 WB | KOLKATA | WEST BENGAL | 700026 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹58.0 L+₹8.5 L (17.2%)Rejected-Finance PO CHANDL PS BISHNUPUR DIST SOUTH 24 PGS PIN 743503 | 24 PARAGANAS SOUTH | WEST BENGAL | 743503 | L4 | Rejected-Finance Other than lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
20 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
ADDN/ ALTN OF BLDG NO T-466 OF ECSR, BOUNDARY WALL FROM CSD DEPOT TO GHORA GHAT AND FLOOR AT BLDG NO 140 AND 146 OF 561 SUB GP (ASCON), PROVN OF STORE ROOM AT ZONE-I OF AGE B/R-II, HIGH MAST POLE FOR HIGH MAST SECURITY LIGHT AT ECSR AND STAINLESSS S
2023_MES_615292_1
8164/E8
Open Tender
Civil Works
Item Rate
120 days
GE(FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE(FW) Kolkata
₹90,000
20 Nov 2023
23 Aug 2023
21 Sept 2023
23 Aug 2023
20 Sept 2023
6 Sept 2023
Amount
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles, all as specified and as directed by the Engineer-in-Charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 150 mm thickness (above or below ground level) including removal of debris & rubbish from site complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (re-inforcement cut as required to facilitate demolition) and removing the rubbish off the premise, complete all as specified and directed.
Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.
Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed.
Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.
Dismantling wrought iron or mild steel work of any description in rafters, purlins and wind ties etc complete all as specified and directed.
Dismantling Structural steel work including doors, Gates but excluding framed truss etc., complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings, complete all as specified and directed.
Dismantling of old chain link wire mesh fencing including flat iron, mild steel round supporting bars, bracing bar etc., complete all as specified and directed.
Dismantling posts or struts (wood, steel or RCC), any section, embedded in natural ground, including taking out embedded portion and making good disturbed ground, complete all as directed.
Dismantling posts or struts (wood, steel or RCC), any section, embedded in concrete, brick work, masonry etc., including taking out embedded portion and making good disturbed ground, complete all as directed.
Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated materials not exc 50 m and depositing where directed at a level not exc 1.50 m above the starting point complete all as Specified and as directed.
Removing excavated materials exc 250m, but not exc 500 m and depositing where directed at a level not exc 1.50 m above the starting point complete all as Specified and as directed.
Removing excavated materials exc 1.50 KM, but not exc 5.00 KM and depositing where directed at a level not exc 1.50 m above the starting point complete all as Specified and as directed.
M & L for hardcore of gauge not exc 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to true surface with broken stones complete all as specified and directed.
M&L for PCC (1:4:8) type D-2, by using 40 mm graded stone aggregate as in foundations, fillings and mass-concrete etc., including necessary form work and finishing the exposed surfaces even and fair, complete all as specified and directed.
M&L for PCC (1:3:6) type C-2, by using 40 mm graded stone aggregate as in foundations, fillings and mass-concrete, complete all as specified and directed.
M&L for PCC (1:2:4) type B-1, by using 20 mm graded stone aggregate as in foundations, fillings and mass-concrete, for fixing of angles etc., complete all as specified and directed.
M&L for plain cement concrete (1:2:4) type B-0 using 12.50 mm graded aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones , bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.
M&L for RCC (nominal mix) (1:1½:3), type A-1 (using 20mm graded stone aggregate) as in foundations, rafts, footings, foundation beams, plinth beams, base of columns, basement of slabs, under reamed piles and mass concrete etc., complete all as specified and as directed.
M&L RCC (nominal mix) (1:1½:3), type A-1 (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. (NOTE: MS reinforcement shall be measured and paid seperately)
M&L for RCC (nominal mix) (1:1½:3), type A-1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc., complete all as specified and as directed.
M&L for mild steel TMT Bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm or securing with clips, etc., complete all as specified and as directed.
M&L for mild steel TMT Bars 6-8 mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm or securing with clips, etc., complete all as specified and as directed.
M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups , spacers and binders cut to length , bent to shape required as in reinforcement and binding with MS wire (annealed) not less than 0.90 mm dia complete all as specified and directed .
Use and waste of formwork to sides of concrete foundations, footings, bases of column, raft and raft beams, side and soffit (if any) for foundation and plinth beams etc, vertical or to batter for rough finished surfaces complete all as specified and directed.
Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
Use and waste of formwork to side of pillars, posts, struts, piers, columns for fair finished surfaces complete all as specified and directed.
M&L Brick Work with fly-ash Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
M&L Brick Work with fly-ash Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed.
M&L for rendering 15 mm thick built in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement) and mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE : Water proofing compound shall be measured and paid seperately).
Supply only liquid water proofing compound all as specified and as directed.
M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished rendering surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper finished with rollers over a coat of alkali resistant primer as per manufacturer's instructions complete all as specified and directed.
M&L for preparation of surfaces and applying two coats of cement base paint over a coat of alkali resistant primer with brush on new plastered surfaces complete all as specified and directed.
M&L for applying one coat of acrylic distemper, finished with rollers to old decorated surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.
All as per item No.39.00 above, but on Ceilings
M&L for complete removal of existing treatment of old decorated plastered surfaces or un-plastered surfaces of walls and soffit of chajjas, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc., including necessary safety & protective measures such as safety belt, headgear etc., and applying Two coats of cement based paint over a coat of primer with brush, complete all as specified and directed .
M&L for preparation of new plastered surfaces of walls and soffit of chajja, roof slab etc., by cleaning brooming, rubbing and scrapping as required using broom, emery paper, putty blades/scrapper as applicable to make the surface free from protrutions, loose particles, dust etc., including necessary safety & protective measures such as safety belt, headgear etc., finishing the surfaces and applying two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make and necessary scaffolding for upto 4 Story building height, complete all as specified and directed by Engineer -in-Charge.
M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.
S&F Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring (overall length of cover plate 150mm) complete all as specified and directed.
S&F 4 mm thick sheet glass, ordinary quality, glazing with cleats, glazing clips, rubber neoprene packing etc, in squares exceeding 0.5 sqm in each pane complete all as specified and directed.
M&L for 40 mm thick plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 25 mm thick plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors, finished even and smooth without using extra cement, complete all as specified and directed.
M&L 75 mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, finished even and smooth without using extra cement as directed by the Engr-in-Charge.
M&L for glass dividing strips 3mm thick, 38mm width of strip inserted in position, confirm to design in concrete floor, complete all as directed by the Engr-in-Charge.
M&L 100 mm thick PCC (1:2:4) type D-2 (using 40mm graded crushed stone aggregate) as in flooring / hardstandings, finished even and fair without using extra cement, complete all as specified and directed by the Engr-in-Charge.
M&L mild steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS-1161:2014 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to FE-410-W (Gde E-250) complete all as specified and directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut. exc 12 n. exc 20 dia of neck and exc 10cm but n exc 15cm long, complete all as specified and directed.
Supply and fixing Rolled mild steel sections as in main and cross beams, hip, jack rafters, purlins, etc., fixed with angle cleat or other connecting plates, confirming to Fe-410-W(Gde-E-250) quality-A, complete all as specified and as directed.
M&L for Rolled mild steel ornamental and intricate framed work, Fe 410W (Gde E-250) quality A, as in grills, gratings, doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, complete all as specified and directed.
S&F MS angle, flats, etc independently fixed without connecting plates etc but ordinary length conforming to FE-410-W(Gde-E-250) quality A as in fencing posts including drilling holes for nuts and bolts and similar works, complete all as specified and as directed.
S&F for mild steel works as in post and stuts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets for securing wire mesh etc., MS angle, flats, etc., independently fixed without connecting plates etc but ordinary length conforming to FE-290 (Gde-E-165) quality A as in fencing posts including drilling holes for nuts and bolts and similar works, complete all as specified and as directed.
S&F mild steel Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured Galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile Galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile Galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
All as per Item No. 59.00 above, but 0.50 mm thick coloured plain galvalume sheet as in ridge/valley gutter of roof.
S&F Vitrified coloured (light shade) Ceramic tiles, 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 20mm thick in cement mortar 1:6 complete all as specified and directed.
All as per item No 61.00 here-in-before, but as in skirting on vertical surfaces, fixed over and incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed..
M&L non skid ceramic coloured digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles, laid over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 350x250x 7mm / 450x 300 x 7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles, fixed over and incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid on floor over and including 20mm thick backing layer in cement mortar (1:6) complete all as specified and as directed.
M&L for granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed.
Material and labour for grinding / polishing and cutting to existing stone floor of any description (such as kota stone, marble stone, terrazzo, granite and similar surfaces etc) cleaning with water and applying zinc oxide powder complete all as specified and as directed.
M&L for stainless steel railing, grade 304 with various type of elegant design / pattern with pipes/square pipes/rod/strip for balcony, staircase, cut out area etc, fixed by inserting in holes of required size and grouted in cement mortar 1:3, bolts & nuts to be covered with stainless steel cap of required size complete all as specified and directed. (NOTE: Weight of stainless steel railing or sections shall be verified through a Board of Officers)
S&F powder coated (medium thickness of powder coating 50 micron) aluminium frame for door, windows, partitions and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F Aluminium anodised Powder coated for doors, windows, ventilators and partition with one or more rebate (minimum thickness of powder coating 50 micron) and three track with 1.8 mm thick channel section and shutter frame thickness 1.65mm, without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed. Notes: 1) Size of window shall be as per site requirement. 2) Glass and wire cloth shall be measured separately.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 Nos in each door, hinges, Mortice lock vertical type size 100 mm 4 levers of brass in each door, anodised aluminium snap beading screws etc as per manufactures instruction complete all as specified. (NOTE: Quoted rate is deemed to be inclusive of the cost of include for anodised aluminium hard ware as indicated, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames, handle, mortise lock etc as described in item. Sheet glass shall be measured seperately)
M&L for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges types B-21 100 mm long (2No) suitable handle (1No) complete all as specified. (NOTE: Glass shall be measured & paid separately)
S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 10 to 12mm thick gypsum board false ceiling including 0.55mm thick GI perimeter channel, GI channel tray frame work having one flange of 20mm and another flange of 30mm with web of 27mm, GI intermediate channel of size 45mm x 0.90mm thick with two flange of 15mm each suspendded form the soffit of roof slab/truss @ 1220mm c/c with MS angle of suitable size fixed to soffit of ceiling with GI cleat and expansion fastener with and including necessary nuts and bolts and gypsum board is screwed to ceiling section with stainless steel screws @ 230mm c/c complete all as specified and directed.
S&F False ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on powder coated aluminium snap grid to support the boards/files with powder coated aluminium anodised main 'T' section 36mm x 25mm x 1.40mm, cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides, fixed to ceiling with hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of ceiling board)
S&F 5.5mm thick toughened frosted glass as in hinge doors, partitions, windows, automatic doors and similar works including cutting to shape, drilling holes as required complete all as specified and as directed by Engineer-in-Charge.
S&F 100mm butt hinges stainless steel medium weight complete all as specified and directed.
S&F 75mm butt hinges stainless steel medium weight complete all as specified and directed.
S&F 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F aluminium handle, cast type anodised 150mm size complete all as specified and directed.
S&F 250mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as directed complete all as specified and directed.
S&F MS 10 mm dia round bar and fixed independently to angle iron for chain link fencing cut to length, bend to shape required, complete all as specified and as directed
S&F 4 mm dia PVC coated galvanised mild steel chain link fencing of mesh size 50 x 50 mm fixed with straining bolts including line wire any mesh size and type to any type of standards, rails, straining bolts etc. including provision of binding wire, complete all as specified and as directed. NOTE: MS post, MS round bars, flat iron, nuts & bolts shall be measured and paid separately.
Supply and laying 150 mm bore reinforced concrete pipe of Class NP-2, laid and jointed with jute & cement mortar 1:2, complete with collars all specified and as directed.
M&L concrete bed to drain pipe including packing under and haunching against the side of drain pipe after laid and tested in PCC 1:3:6 type C2 for 150 mm bore pipes complete all as specified and directed.
Supply and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. (NOTE: Cost of sand cushioning is deemed to be included in the quoted rates)
All as per Item No. 87.00 above but using old serviceable paver blocks obtained from dismantling (NOTE: Sand cushioning, if required shall be measured and paid separately)
M&L Sand filling under floors under paver block, thickness not exc 50 mm including consolidation complete all as specified and as directed
S&F in repairs galvanized 2 strand steel barbed wire fencing conforming to IS : 278, with 2.24 mm dia. barb wire conforming to IS : 280 with zinc coating as per IS : 4826, barbed with 2 mm dia. barbs at 75 mm spacing and straining and fixing to any type of standard rails/RCC fencing posts straining bolts, including securing or tying at crossing with and fixing of galvanized mild steel wire, staples or steel pins etc., incl dismantling of existing barbed wires complete all as specified and directed. (Note: - Each line of wire will be measured)
S&F in repairs anti-rust concertina coil (reinforced punched barbed tape single layer) for fencing work incl taking down existing coils complete all as per following specifications :- (i) Diameter of concertina coil - 600 mm dia (before stretch) (ii) Number of turns in concertina - 50 turns (iii) Weight of each coil - 10.5 KG (iv) Coverage per coil - 8 m (v) Central core wire - made from high tensile spring steel core wire conforming to IS-4454 duly hot dipped galvanised (conforming to IS-2629) with diameter 2.59 mm + 0.05 mm, UTS 145-160 kg/sqmm, zinc coating 250-300 grams/sqm (vi) Strip - Electro galvanised steel strip 0.5 mm + 0.02 mm thick, width 19 mm (before wrapping on central core wire) conforming to IS-1573, zinc coating - 120 gram/sqm and bituminised dipped, width of barbs 11.5 mm, pitch of barbs 25.4 mm+ 0.2 mm
Item No. 91.00 (Contd....) (vii) Clips - AISI 304-1.5 mm thick 'C' & 'U' clips. 'C' special type for fixing coil and RBT wire, 'U' clips special type for joining one coil to another coil and RBT wire to RBT wire joining. (viii) No. of clips - minimum 125 for each coil (ix) Handle and spikes to be provided as required (NOTE : 1. The concertina coil shall be given additional primer treatment of epoxy/ polyurethane and final paint top coat of caufiled green shade (BSL 139) by hot dipping process. 2. RBT wire for fixing of concertina coil will be measured and paid separately. 3. Running length of the wall shall be measured for payment purpose.
Supply only epoxy/polyurethane coated RBT wire of high tensile strength of 165 kg/sqmm with tape (0.52 mm thick) and weight complete all as specified and directed.
SCHEDULE 'A' PART-II (INTERNAL ELECTRIFICATION) M&L for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (NOTES: - (i) Where tube light fitting is to be fitted/suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)
All as per item No. 93.00 above but for one 5 amps switch socket combination on independent board, complete all as specified and directed (concealed type point wiring with terminal box).
All as per item No. 93.00 above but using 2.5 sqmm single core multi stranded copper conductor FRLS-H PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 2.5 sqmm green FRLS-H PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (concealed type point wiring with terminal box).
S&F switch piano flush button AC 230 V Single pole 5/6 Amp one way complete all as specified and directed.
S&F switch socket combination, 5 pin, 6 Amp AC 230 Volts flush type complete all as specified and directed.
S&F switch socket combination 2 in 1, 3 pin, 6 and 16 Amps flush type universal complete with all necessary electrical connection all as specified and directed.
S&F ceiling rose surface, polycarbonate/bakelite, three terminals complete all as specified and directed.
S&F electronic type stepped speed regulator, 100 watts, AC 230 Volts for ceiling fan, complete all as specified and directed.
S&F surface mounted LED luminaire, 1 X 20 Watt in polycarbonate housing, 110 lumen/watt lumen efficacy, operating voltage 180-270 V, with acrylic/polycarbonate difuser & integrated constant current electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper wire of suitable size complete all as specified and directed.
M&L for sub main wiring with 2 runs (P-N) of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm 1100 volts grade along with one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm 1100 volts grade as earth continuity conductor drawn through and including adequate size PVC non-metallic concealed conduit complete all as specified and as directed. (NOTE : Three runs of single core 4.0 sqmm cable and one run of PVC conduit shall be measured as one unit)
S&F Double Door, Sheet Metal Enclosure for DBs (premium range), for mounting of MCB for 240 Volts, 8 way, with 100 Amps rated copper bus bar, Single Pole & Neutral, complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / C&S/ PANASONIC / HAGER)
S&F MCB (premium range), 'C' series, SPN, 32 Amps, breaking capacity 10KA complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / C&S/ PANASONIC / HAGER)
S&F MCB (premium range), 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. MAKE : L&T / LEGRAND / SCHNEIDER / ABB / C&S/ PANASONIC / HAGER)
Supply and Hanging, ceiling fan, with brushless DC motor, 1200 mm sweep, BLDC 5 Star rated with five years warranty (with / without remote), down rod, canopy, fan blades and accessories and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 1.0 Sqmm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fan including dismantling existing fan complete all as specified and directed. (MAKE : HALONIX, Model: PLASMA BLDC/ CROMPTON, Model : EENERGION GOOVE /BAJAJ, Model: SKU-251100-Emergps 28W 1200mm CF / ORIENT, Model: HECTOR 500 / HAVELLS, Model: Efficiencia Neo/ USHA, Model No.ENERGIA) NOTES: (i) Old fan, if any taken down, shall be deposited by contractor in MES store yard. (ii) The vender shall be provided with marking / embossing toll free No duly indicating the guarantee/warrantee period on the every fan. (iii) The tenderer shall be marked/inscribed the MES / SM No on fan with synthetic enamel paint (Black colour)
SCHEDULE 'A' PART-II (EXT ELECTRIC SUPPLY): M&L for sand cushioning / sand covering for underground cable protection and consolidated and compacted with clean dry sand complete all as specified and as directed.
M&L bricks with sub class 'B' locally available laid in trenches above sand cushioning for cable protection complete all as specified and as directed.
Supply, Laying and testing XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable of size 35 Sqmm X 3.5 Core, 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall/passing through pipe/pole incl necessary aluminium thimbles, jointing and testing complete all as specified and directed. (Note : Necessary earth work to be measured and paid separately.
S&F LED Flood Light fitting 210 Watts, 230 Volts, AC, out door type, with thermel management in multiple optics in high pressure die cast aluminium housing with prismatic polycarbonate modular secondary lens optics with integrated constant current electronic driver and toughened glass cover, IP66 grade ingress protection, impact resistance IK07 complete all as specified and directed and complying with the following specifications:-. (a) minimum system efficacy 130 lumen/watt (b) CRI not less than 70, (c) THD < 10% (d) Power factor not less than 0.90 (e) having in built short circuit and surge protection upto 4 kV (f) having 10 KV external surge protection (g) colour temperature not less than 5700 degree K (h) life not less than 50000 hours of operation
S&F LED aviation light luminarie 12 Watts, 230 Volts, integral type, compresing aluminium housing with polycarbonate enclosure, complete all as specified and as directed. Make: Bajaj / wipro / Philips / Crompton or Equivalent as approved by GE
S&F PVC insulated multistranded copper conductor wire, 4.0 Sqmm 5 Core, round flexible for connection of light fittings, with and including suitable size copper lugs etc., complete all as specified and as directed.
Supply, install, commissioning and testing of outdoor type LT panel board, cubical type, sloping canopy top roof, dust and vermin proof, made out of 3.15 mm thick CRCA sheet of size 650 mm x 500 mm x 400 mm, fabricated in CPRI approved factory with front and back openable door (with locking arrangement) and making compartment for each ACB/MCCB/change over switch separately, duly powder coated over a coat of red oxide zinc chrome primer inclusive of four numbers aluminium bus bar of 200 Amps capacity (of adequate length), for three phase and neutral system, fixed over and including 4 nos insulators, pre-wired with PVC insulated stranded copper conductor (of adequate size), all incoming / outgoing connection to be made with copper lugs and copper strips, with provision of cable entry and exit at mid portion of the panel board (with cable gland),and two numbers Danger Notice Plate (of size 20 cm x 15 cm, suitable for LT line, made out of 0.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour, fixed with MS angle iron of size 50x50x6 mm complete with legs not more than 450mm long including grouting with PCC 1:2:4 type B1 complete all as directed by the Engr-in-Charge including supply and fixing of the following accessories :-
MCCB, 4 pole, 25 KA, thermal magnetic release, 63 Amps, Ics=100% of Icu, 415 Volts AC - 01 No (Make: L&T, Cat No: CM91712OOHOOG / HAGER, Cat No: HHS064DR / SCHNEIDER, Cat No: LV510315 / LEGRAND, Cat No: 6697 16 / ABB, Cat No: 1SDA116244R1 / C&S Cat No.CSE1M125ATM4P-*)
MCCB, 4 pole, 25 KA, thermal magnetic release, 40 Amps, Ics=100% of Icu, 415 Volts AC - 02 Nos (one spare) (Make: L&T, Cat No: CM91712OOGOOG / HAGER, Cat No: HHS041DR / SCHNEIDER, Cat No: LV510313 / LEGRAND, Cat No: 6697 14 / ABB, Cat No: 1SDA116244R1 / C&S Cat No.CSE1M125ATM4P-*)
MCB, 10 kA, 'C' Curve, SP, 06-32 Amps - 03 Nos
LED indicating Lamp with holder for main supply & standby supply indicating RYB (Set of three) - 01 Set
CT's ratio 300/5A - 01 Set (Set of 03)
Note:(i) All incoming and out going cables, duly thimble along with suitable size of brass cable glands, to be connected to accessories. (ii) All MCCB's to be connected internally with suitable size of aluminium strip. (iii) All requisite accessories including spreader terminals shall be provided alongwith MCCBs and cost of the same shall be deemed to be inclusive in the quoted rates.
M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized iron strip 25 X 4 mm (upto 7.5 metres) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing and complete all as shown in Figure 15A of IS 3043 :1987, complete all as specified and directed.
Material and labour for PCC (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in foundations of poles, as mass concrete, complete all as specified and directed.
M&L for PCC (1:3:6) type C-2 using 20 mm graded crushed stone aggregate as in plinth cources, string cources, etc., complete including slightly rounded or chamfered for GI tubing post for ait termination rod etc., including using necessary formwork and finishing the exposed surfaces even and smooth without using extra cement,complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in coping of poles / pipes / strip alignment etc using necessary formwork and finishing the exposed surfaces even and smooth without using extra cement, complete all as specified and directed.
Supply, erect, test and commissioning of minimum 15 meter high mast system with its accessories. Mast shall be in two sections, hot dip galvanized and suitable for wind velocity 70 M/ sec as per IS 875 part 3. It shall consist of GI lantern carriage suitable for 9 luminaries symmetrically & their control gear boxes and lighting finial, double drum winch with both motor and manual operation, suspension system with SS wire rope 6mm dia (7/19 construction), trailing cable of flexible copper conductor cable 5 core 2.5 Sqmm (minimum), torque limiter adjustable type & 01 No. aviation obstruction light (LED type). The mast shall have an integral power tool with reversible option installed inside the base compartment for its operation, complete all as specified and as directed. Make: Bajaj / Philips / Cromton / Surya or equivalent as approved by GE.
Note: The rate quoted shall be inclusive of the following: (a) Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates & templates, complete set (b) Supply of control panel housing suitable control circuit for the operation of the mast made out of 3.15 mm thick CRCA sheet, double door type with slopy canopy suitable for outdoor installation. It shall also consist of suitable control for the power tool motor -01 No with suitable switchgear and wiring from panel to light fittings with suitable copper conductor cable, glands, lugs including suitable foundation - 01 Job (c) Construction of suitable shallow foundation with M-20 grade concrete for the mast considering the safe soil bearing capacity at site as 10 t/m² at 2 meter depth with all material and labour (d) Erection and commissioning of the high mast with the help of suitable equipment. (e) Provision of GI pipe earthing for mast with 2.5m long 40mm dia GI Pipe including connection to mast earth terminal with 32 X 6mm GI flat with all material and labour (f) The LED flood light fittings will be measured and paid separately as supply only.
S&F Street light junction box made out of 2 mm thick mild steel sheet including applying two coats of synthetic enamel paint over a coat of zinc chrome primer duly spray painted of size not less than 20 cm x 20 cm x 15 cm with locking arrangements inclusive of 20 x 3 mm thick aluminium bus bar 100 amps - 04 Nos of suitable length incl MCB SP 5 amp - 01 No, fixed on and including insulators for mounting bus bar (with provision of cable entry and exit conduit), fixed with necessary flat iron clamp of size 25mm x3 mm 2 Nos (length as reqd to fix in pole), bent to required shape including painting, at bottom portion of the pole (above coping), fixed with GI bolts, nuts and washers (of suitable size), incl taking down existing junction box complete all as specified and as directed by the Engineer-in-charge .
S&F in repair test point terminal block, made of gun metal or phosporous beonze of size 75 mm X 75 mm X 25mm, drilled and screwed including 3 Nos, 8 mm dia and 25 mm long hex screws complete all as specified and directed.
S&F galvanised iron strip 25 mm X 3.15mm with saddles and fixing screws etc, for roof conductors and down conductors above ground, fixed on porcelain insulator @ 1.0 m spacing complete all as specified and directed. (Note: Porcelain insulators wil be measured and paid seperately)
S&F porcelain insulators of size 50 mm with fixing arrangements, complete all as specified and directed.
MS HORIZEN
ARJUN DAS VALECHA
UNITED ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .