GEU(N)39 2021 22 REPAIR TO FLOORING JOINERIES PLASTERING PLINTH PROTECTION BRICK WORK ROOFING IN EME BN AND AFVH UNDER GENORTH

Amount

Dismantling floor , hearth or wall tiling including cement mortar bedding complete, removing serviceable tiles to store and rubbish off the premises, complete all as specified & directed by Engr-in-Charge.

M&L for Non skid coloured ceramic tiles area of each tile exc. .10 sqm but n.exc. 18 sqm 7mm to 8mm mm thick as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in CM(1:4) including skirting complete all as specified & directed by Engr-in-Charge.

M&L for vitrified ceramic tiles any colour 7 to 8 mm thick(Square or rectangular) polished, area of each tile not exceeding 0.36 sqm(Size 600mmx600mm) in floor etc,Set and jointed in neat cement slurry and pointed in coloured cement to match, including screed bedding layers in CM 1:4 (10 mm thick) including skirting all as per specified & directed by Engr-In-Charge.

M&L for vitrified ceramic tiles any colour 7 to 8mm thick(Square or rectangular) polished Double charged, area of each tile not exceeding 0.36 sqm (Size 600mmx600mm) in floor etc,Set and jointed in neat cement slurry and pointed in coloured cement to match including screed bed in CM 1:4 (10mm thick) with skirting all as per specified & directed by Engr-In-Charge.

S&F Glazed ceramic tiles (coloured) on vertical surfaces of size 450x350x6/300x600x7mm thick set and jointed in neat cement slurry over 10mm thick rendering in CM 1:4 and pointed in coloured cement to match the shades of tile complete all as specified & directed by Engr-in-Charge.

M&L for 25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded crushed stone aggregate, finished even and rough as in floors to recive tiles, complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut kota stone slab flooring 18-20mm thick over 20 mm thick cement screed in CM 1:3 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed by Engr-in-Charge.

All as per above si no 07 but on skirting including backing coat of 10 mm thick in CM 1:4 complete all as specified & directed by Engr-in-Charge.

M&L for 18 to 20 mm thick,Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, rounding of edges and polishing over 20 mm thick screed bed in CM 1:4 complete all as specified & directed by Engr-in-Charge.

M&L for rounding of / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), all as specified & directed by Engr-in-Charge.

Taking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engr-in-Charge.

M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge.

M&L for 10 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth mixed with water proofing compound complete all as specified & directed by Engr-in-Charge.

M&L for 5 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:3 and finished even and smooth mixed with water proofing compound complete all as specified & directed by Engr-in-Charge.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth with using extra cementcomplete all as specified & directed by Engr-in-Charge.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each and making good to distrubed surfaces complete all as specified & directed by Engr-in-Charge.

All as per SI item no 16 above but exceeding 1.5 Sqm and not exc 4 Sqm each complete all as specified & directed by Engr-in-Charge.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer all as specified & directed by Engr-in-Charge.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, complete all as specified & directed by Engr-in-Charge.

M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified & directed by Engr-in-Charge.

All as per si item no 20 above but glazed and skeleton shutter with sash bar for glass / wire gauge. all as specified & directed by Engr-in-Charge.

M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified & directed by Engr-in-Charge.

S&F Aluminum anodised bolts barrels tower bolts with bright both 150mm long complete all as specified & directed by Engr-in-Charge.

S&F Aluminium alloy ,anodised,sliding door bolt 300 mm length with hasp,staple (bolt type) and fixing clip of sheet,cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy and fixed complete all as specified & directed by Engr-in-Charge.

S&F Alunminium handle cast type 150mm long oval type complete all as specified & directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed by Engr-in-Charge.

M&L for preparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over preprimered surface complete all as specified & directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan `P` or `S` trap ( pedestal pattern ) white including fixing bolts,including connection P trap etc to drain pipe ( or out going pipe) and to flushing pipe,antisyphonage pipe etc complete.all as specified & directed by Engr-in-Charge.

S&F vitreous china squatting pan ‘Orissa’ pattern size 580X440mm , white with integral foot rest (Excluding flushing system and flush pipe) with ‘P’ or ‘S’ trap all as specified & directed by Engr-in-Charge. .

S&F in repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene ball valve,float and handleof low or high density and 15mm PVC connection 450mm long complete.all as specified & directed by Engr-in-Charge.

Demolation of brick work or stone boulder masonery built in cement mortor including all quoins arches pillars etc complete all as specified & directed by Engr-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius butt in cm 1.6 complete all as specified & directed by Engr-in-Charge.

M&L for half brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius but in cm 1:4 complete all as specified & directed by Engr-in-Charge.

S&F in repair Viterous china wash basin pedestal type white flat back size 550 x 400mm including waste coupling CP 32mm dia chain and plug and porcelan stopper and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and Incl 450mm PVC waste pipe getting with holes complete all as specified and directed by Engr-in-Charge.

S&F pillar taps cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed of iron pipe of bore 15mm complete all as specified & directed by Engr-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified & directed by Engr-in-Charge.

S&F in repair towel rail 600mm long aluminium tower bolts 20mm D type complete all as specified & directed by Engr-in-Charge.

M&L for prepration of old decorated surfaces and applying two coats of Distemper oil emulsion on walls over a coat of 2 to 3mm thick wall care putty in two coats including complete removal of existing treatment complete all as specified & directed by Engr-in-Charge.

M&L for prepration of new decorated surfaces and applying two coats of Distemper oil emulsion on walls over a coat of 2 to 3mm thick wall care putty in two coats including complete removal of existing treatment complete all as specified & directed by Engr-in-Charge.

M&L for three coat of white wash on new surface of ceiling complete all as specified & directed by Engr-in-Charge.

M&L for two coat of cement base paint over newly plastered surfaces of wall including preparing surfaces complete all as specified & directed by Engr-in-Charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm dia complete all as specified & directed by Engr-in-Charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20mm dia complete all as specified & directed by Engr-in-Charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 25mm dia complete all as specified & directed by Engr-in-Charge.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore complete all as specified & directed by Engr-in-Charge.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20mm bore complete all as specified & directed by Engr-in-Charge.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 25mm bore complete all as specified & directed by Engr-in-Charge.

S&F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15mm dia complete all as specified & directed by Engr-in-Charge.

S&F in repair 15mm Bib taps, cast copper alloy, fancy type chromium plated, with crtuch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed by Engr-in-Charge.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified & directed by Engr-in-Charge.

S&F in repair Rotational moulded polyethlene water storage tanks three layered white (cylindrical vertical with closed top) hoisted and fixed in position including connection with nipple of suitable size all as specified in SSR Part I ,capacity of water tank 500 Ltr including dismantling & remove old tank from site all as specified & directed by Engr-in-Charge.

S&F in repair Rotational moulded polyethlene water storage tanks three layered white (cylindrical vertical with closed top) hoisted and fixed in position including connection with nipple of suitable size all as specified in SSR Part I ,capacity of water tank 1000 Ltr including dismantling & remove old tank from site all as specified & directed by Engr-in-Charge.

S&F Ball brass valves 20mm , high pressure, with polyethene float & fly-nut complete, screwed for iron pipe or brass ferrule & fixed. complete all as specified & directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-Charge. .

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-Charge. .

M&L for Plain Cement Concrete 1:4:8 type D-2 as in floors 75mm thick complete all as specified & directed by Engr-in-Charge.

M&L for 40 mm thick flooring in Plain Cement Concrete 1:2:4 type B1 using 20mm graded stone aggregate surfaces finished even and smooth using extra cement (staircase incl steps) complete all as specified & directed by Engr-in-Charge.

M&L for Machine pressed concrete interlocking paver block glossy finish, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified & directed by Engr-in-Charge.

M&L for 25mm thick Sand cushioning /filling under floors or complete all as specified & directed by Engr-in-Charge.

M&L for provision of rubber moulded chequred cement concrete tile size 20cmx 20cm x 25mm thick machine pressed set & jointed in neat cement slurry as in floors joint fiil up with white grey cement & pigments all including 15mm thick screed bed with CM 1:4 all as specified & directed by Engr-In-Charge.

S&F Aluminium extruded section hydraulically door closer regulated designation no-1 universal type suitable for door shutter upto 700mm in width & of weight not more than 35 kg all as specified & directed by Engr-In-Charge.

S&F With Wood free EPS Factory made solid pvc moulded door shutter 28 to 30mm thick (stiles) with 2,4,6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC Sheet on back face & Fixing in frame at site as per specification & drawings complete all as specified & directed by Engr-in-Charge.

S&F solid PVC Door frame of size 50mmx 47mm made out of 5mm wood grain printed PVC Sheet used instead of plain colour sheet PVC sheet reinforced with MS Square tube Xixinf & opening as per specification & drawing & all as specified & directed by Engr-In-Charge.

S&F repair Pillar taps, fancy type, cast copper alloy, with capstan head, chromium plated, for bore of pipe 15mm all as specified & directed.

S&F in repair wash basins, vitreous China flat back, size 580 X 450mm (excluding CP pillar tap),including 32mm size waste coupling, 15mm size 450 mm long PVC connection, 32mm size PVC waste pipe & angle brackets 30x30x450mmcomplete all as specified & directed by Engr-in-Charge.

S&F Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified & directed by Engr-in-Charge.

S & F in repairs vitreous China bowl urinal flat back size of 465x355x265mm white (miniumum) with grating & union for discharge pipe (excluding flushing cistern,)including waste fittings complete all as specified & directed by Engr-in-Charge.

Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-Charge. .

M & L for Reinforced Cement Concrete M-25 type B1 1:2:4 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified & directed by Engr-in-Charge.

M & L for Reinforced Cement Concrete M-25 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including 15 mm th plastering with water proofing compound as directed laid/made to slope as in RCC roof surfaces complete all as specified & directed by Engr-in-Charge.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified & directed by Engr-in-Charge.

M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified & directed by Engr-in-Charge.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engr-in-Charge.

Mild steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engr-in-Charge.

S&F Galvanised mild steel wire cloth 0.63mm nominal dia of wire & average width of aperture 1.40mm complete all as specified & directed by Engr-in-Charge.

Supply and fixing factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs, complete all as specified & shown in drawings, complete all as specified & directed by Engr-in-Charge.

Supply and fixing factory made steel windows (Box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs, complete all as specified & shown in drawings, complete all as specified & directed by Engr-in-Charge.

Providing and fixing 30mm thick factory made PVC door shutter consisting of panel of Hollow PVC Profile of 24mm thickness, consisting of frame made out of M.S tubes of 19 gauge thickness and size of 19mmx19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mmx19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick Prelam PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing,complete all as specified & directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings, complete all as specified & directed by Engr-in-Charge.

M&L 18/19mm thick prelaminated particle board medium density flat pressed single layer type or three layer type with BWR type adhesive in kitchens cabin edges bonded with Pvc tape of similar shades complete all as specified & directed by Engr-in-Charge.

M & L for hasp and staple, 100 mm, mild steel, safety type, stove enalmelled black , including bolt to hinge plate and fixed with screws, complete all as specified & directed by Engr-in-Charge.

S & F Continuous ( Piano ) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm complete all as specified & directed by Engr-in-Charge.

S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing,anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (2 no.). hinges type B-21 100mm long (4 no.) suitable handle (2no.) complete all as specified & directed by Engr-in-Charge.

S&F Powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed by Engr-in-Charge.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed by Engr-in-Charge.

Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets,all as specified.

S&F non asbestos fibre Cement board ceiling 6mm, thick in 605x605mm panel (Make as approved by Accepting Officer) designed ceiling conforming to IS-14862 type B category three incl snapgrid frame work, hold fast, suspenders fixed in repair complete all as specified & directed by Engr-in-Charge.

M&L for 4mm thick non AC board fixed with screw complete all as specified & directed by Engr-in-Charge.

Hacking out old broken glass any thickness, size quality from wooden frame or steel frame glazed with putty or fixed with beads complete all as specified & directed by Engr-in-Charge..

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified & directed by Engr-in-Charge.

S&F4 mm thick figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane complete all as specified & directed by Engr-in-Charge.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares exceeding 0.50 Sqm in each pane complete all as specified.complete all as specified & directed by Engr-in-Charge.

S&F4 mm thick figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified & directed by Engr-in-Charge.

Dismantling of CGI/AC/ any others sheet of any description incl ridges etc all as specified & directed by Engr-In-Charge.

S&F 6mm thick asbestos cement corrugated or semi- corrugated sheets in roofs walls etc all as specified & directed by Engr-In-Charge.

S&F 6mm thick asbestos cement corrugated or semi- corrugated sheets as in ridges on roof etc all as specified & directed by Engr-In-Charge.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified & directed by Engr-in-Charge.

Pre-Painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of any colour having tensile strength of 550Mpa and AZ150 top coating as in roof covering/cladding to wall fixed with self tapping screws complete all as specified & directed by Engr-in-Charge.

M & L for walling of random rubble stone masonary uncoursed well bonded, bedded and solidly hearted built in cement mortar 1 :6 complete all as specified & directed by Engr-in-Charge.

M & L for precast cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate bonders for stone walling, set in cement mortar 1:6 with paling fair faces including chambers weathering etc. complete all as specified & directed by Engr-in-Charge.

M & L for plain cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in bed block/coping band or string etc. Including use of necessary formworkcomplete all as specified & directed by Engr-in-Charge.

Supply and fixing PVC (SWR). Pipe 110mm dia in any length with rubber ring joints, fixed to walls any height including taking down all as per specified and directed.

Supply and fixing PVC (SWR). Pipe 75 mm dia in any length with rubber ring joints, fixed to walls any height including taking down all as directed.

Dismantling of boarding any description fixed in any position with nails as per specified by Enge-in-charge.

S&F Solid PVC Wall Lining ( Wall Panelling) consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement & fixing at site on PVC frame as per specification & directed by Engr-In-Charge

S & F 5.5mm thick tinted glass with rubber in square 0.5 sqm in each plane including necessary jointing cleats /anodized aluminium fillets / glazing clips with rubber gasket, complete all as specified and as directed by Engr-in-Charge.