Construction of minor bridge 3x12 meter span on Ishan Nadi at usmanpur to nagla suman tiksuri

Bridge Work Providing and Constructing temporary Island for Construction of Well Foundation for 5m dia Well. Excluding GST

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 2000 m as per MORT&H item Sr no. 3.14 & Technical Specification Clause 305 Excluding GST

Providing and Laying Cutting Edge of Mild Steel weighing 40 kg per metre for Well Foundation complete as per Drawing and MoRTH Item Sr no. 12.10, Technical Specification clause 1200 & 1900 Excluding GST

M-30 Reinforced Cement Concrete, in Well Foundation ( in well curb ) complete as per Drawing and MoRTH item Sr no. 12.11 A (ii) and Technical Specification clause 1200, 1500 & 1700. using Batching plant and concrete pump. Excluding GST

Reinforced Cement Concrete M30 Grade, in Well Steining complete as per Drawing MoRTH Item Sr no. 12.11 B VII and Technical Specification clause 1500, 1700 & 2100. Excluding GST

Sinking of 5 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specifications. Depth of sinking is reckoned from bed level. Excluding GST i) depth below bed level up to 3.0M

ii) depth below 3.00 to 10 M

iii) Beyond 10.00 to 15.00 M

Plain/Reinforced Cement Concrete, M-30 Grade in Well Foundation complete as per Drawing and MoRTH item no. 12.11 C (ii) case I and Technical Specification clause 1200, 1500 & 1700 in BOTTOM PLUGGING using batching plant and concrete pump. Excluding GST

Plain/Reinforced Cement Concrete, M 25 Grade in Well Foundation complete as per Drawing and MoRTH item no. 12.11 C (ii) case I and Technical Specification clause 1200, 1500 & 1700 in INTERMEDIATE PLUGGING using batching plant and concrete pump. Excluding GST

Sand Filling in Wells complete as per Drawing and MoRT&H item Sr no. 12.21 & Technical Specifications clause 1207. Excluding GST

Plain/Reinforced Cement Concrete M 30, in Well Foundation complete as per Drawing and MoRTH item no. 12.11 F (iii) as per technical specification clause 1200, 1500 & 1700 RCC in WELL CAPS using concrete mixture. Excluding GST

RCC M 35 in SUBSTRUCTURE in Piers, Pier caps, Abutment columns, Abutment beams, Back Walls & Wing walls etc. as per MoRT&H item no. 13.05 G Technical specification clause 1500, 1700 & 2200 using batching plant and concrete pump. Excluding GST

Furnishing and placing RCC/PSC Grade M-35 in superstructure as per drawing and MoRT&H item no. 14.01 D & Technical specification clause 1500, 1600 & 1700 for Deck slab, Kerb using batching plant and concrete pump. Excluding GST

Providing and laying Cement concrete wearing coat M-35 grade including reinforcement complete as per drawing and Mort&h S.No. 14.04 & Technical Specifications clause 2702. Excluding GST

Supplying, Fitting and Placing uncoated HYSD bar Reinforcement in Foundation, sub structure & Super-Structure complete as per Drawing and MoRT&H Item no. 12.40, Technical Specifications clause 1600. Excluding GST

Reinforced cement concrete grade M-30 approach slab including reinforcement and formwork complete as per drawing and MORT&H S.No. 14.11 & Technical specification 1500,1600,1700 & 2704 using batching plant and concrete pump. Excluding GST

PCC M15 Grade leveling course below approach slab complete as per drawing and MoRT&H item Sr No 12.08 ,Technical specification 2700 using concrete mixer. Excluding GST

Supply and fixing of 100 mm dia PVC pipe for services in footpaths per drawings SOR Basic rates item No 24 . Excluding GST

Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and MoRT&H item Sr no. 13.14. Excluding GST

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation as per MoRT&H item Sr no. 14.22 & technical specification 2607. Excluding GST

Drainage Spouts complete as per drawing and Technical specification. Excluding GST

Main Approach Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 2000 m as per MORT&H item Sr no. 3.14 & Technical Specification Clause 305. Excluding GST

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing bymix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRD Item no. 4.1 Technical Specificatin Clause 401 (Grading I Material). Excluding GST

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. Excluding GST

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per MoRD item no. 4.8, Technical Specification Clause 405 (3) by manual means. Excluding GST

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502. Excluding GST

Providing and applying tack coat with Bitumen VG-10 using Bitumen distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRD item no. 5.2, Technical Specification Clause 503. Excluding GST

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type as per MoRD item no. 5.9, Technical Specification Clause 508) by manual means. Excluding GST

Providing and laying seal coat by manual means with VG-10 grade bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per MoRD item no. 5.12 case III, Technical Specification Clause 510 by manual means. Excluding GST

Protection Work Providing and laying filter material underneath pitching in slopes, complete as per drawing MoRT&H item no. 15.5 and technical specifications 2504. Excluding GST

Providing and laying stone boulder pitching using 25-60 kg stone boulder on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing MoRT&H item no. 15.4 and technical specifications 2504. Excluding GST

Earthwork in excavation for foundation of structures as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious dressing of sides and bottom and back filling with approved material. Excluding GST

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. Excluding GST

Class-150 (Non Modular) brick work in 1:3 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. Excluding GST

12mm Cement plaster with cement mortar in proportion of 1:3 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. Excluding GST

Conditions

Please Enable Macros to View BoQ information