REPAIR TO FLOORING, PLUMBING, JOINERY AND CONNECTED WORKS IN CERTAIN AREA AT PANAGARH MIL STN UNDER AGE B/R-II OF GE PANAGARH

Amount

Dismantling of wall or ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/brackets any thickness including vocer fillets complete all as specified and as directed.

S&F 605mmx605mm Anodised aluminium snap grid frame work for false ceilling with all necessary aluminium angle & Tee arrangement with and including fixing cleats screw etc complete all as specified and as directed.

S&F Hanger 6mm dia G.I (up to 1200mm length) adjusting level fixed to roof by means of ceilling cleats made out of G.I flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified.

M&L 4mm thick non asbestos fiber plain building boards fixed in aluminium frame work in ceilling flat or sloping with screw complete all as specified and as directed..

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceble tiles to store and rubbish off the permises complete all as specified and as directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick (squre/rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.06Sq.m but not exceeding 0.11 Sq.m, in floors set and jointed with grey cement slurry & pointed with grout of matching shade, complete all as specified and as directed.

M&L 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L Glazed ceramic colour tiles of size 300x200x 6 to 7mm laid on vertical surface such as dado/skirting over cement mortar backing coat, set jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and as directed .

M&L 10mm thick rendering in cement mortar 1:4 as backing coat for fixing tiles in vertical surfaces complete all as specified and as directed.

Dismantaling AC (corrugated,semicorugated) sheet in roof covering complete all as specified and as directed.

M&L 6mm thick asbestos cement,corrugated sheet in roof fixed with coach screw complete all as specified and as directed.

S&F MS flats iron 50x5mm thick as wind tie over MS sheeting roof and fastening/lacing complete all as specified and as directed.

Dismntaling plain or corrugated steel sheet or galvanised sheet in roof any gauge,any thickness complete all as specified and as directed.

M&L galvanised corrugated mild steel sheeting 0.63mm thickness with two corrugation side laps fixed with L-type or J-type or cracked hooks bolts in liue of screws with grade of zinc coating 275.complete all as specified and as directed.

All as per item No. 15 above but except sheeting complete all as specified and as directed.

Demolition of Plain cement concrete below or above ground level n.exc 15 cm thickness and removal of debris to outside MD land complete all as specified and as directed.

M&L chequred cement concrete tile 20cmX20cmx25mm thick set and jointed and pointed neat cement slurry and over 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size conformed to IS 15658-2006 of 60mm thickness M-35 grade complete all as specified and as directed.

M&L for sand cushion filling for floor,paver block, foundation etc including watering and consolidation complete all as specified and as directed.

M&L PCC 100mm thick type D-2 1:4:8 ,(40mm graded aggregate) as in sub base complete all as specified and as directed.

M & L for hardcore of brocken stone or boulder of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L cement concret type C-2 1:3;6 using 40mm graded aggregate as in plinth protection 75mm thick concrete surface without using extra cement complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar fcings, dressed stone work and precast concrete and removing and rubbish off the premises (outside MD land) complete all as specified and as directed.

M&L brick work with fly ash bricks (old size) straight or curved on plan exc 6m mean radius,built in cement mortar (1:4) complete all as specified and as directed.

M&L Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:4) complete all as specified and as directed.

M&L half brick with fly ash bricks (old size bricks) straight or curved on plan exc 6m mean radius,built in cement mortar (1:4) complete all as specified and as directed.

M&L15mm thick plaster in brick work in cement & sand mortar 1:4 in fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for cement concrete Type B0 1:2:4 (12.5mm graded aggregade) in copping,cills, steps and similar works complete all as specified and as directed.

M&L two coat of synthetic enamal paint on steel surface of any description over 10cm in width or grith, over one coat of red oxide complete all as specified and as directed.

M&L plain galvanised mild steel sheeting 1.00mm thickness in rigds, hips, vally gutter ,drip and straight flashing (length and grith as fixed) with grade of zinc coating 275.complete all as specified and as directed.

S&F rolled mild steel angle iorn or tee section Fe- 410W (grade 250) framed work as in roof covering ,trusses ,purlin ,rails and fastening and heavy bracket frame in (beam,tee,angle, channel of flat section including distance pieces, cleats etc incl cutting to dead length where required ,notching, drilling, fitting,reviting and or welding or connecting with bolts and nuts (including rivits or bolts and nuts)and fixing complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.

M&L Washing rubbing down and stopping of old distampered and painted wall surfaces including brooming down or steel wire brushing scrapping down smoke soot, moulds moss and efforescent salts and trading oil and greasy spots and applying two coat of oil bound distemper on wall surfaces all as specified and directed by Engineer-in-Charge

Taking down CI/AC pipe of any dia fixed to walls complete all as specified and as directed.

S&F CI/Soil waste pipe 100mm dia sand cast iron any length with or without ears with cement joint complete all as specified and as directed.

All as per item No. 36 above but 75mm dia complete all as specified and as directed.

S&F CI bend 75 mm dia complete all as specified and as directed.

S&F CI bend/branch pieces single of 100mm dia complete all as specified and as directed.

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5Sqm in each pane complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and as directed.

Preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L 6mm thick ply wood, grade BWR, type BB fixed with screws to timber frame work for cupboards complete all as specified and as directed.

M&L black board, grade 2 quality 18mm thick interrior grade ,decorative type with decorative face veneer on one face complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

Taking down chowkat or frame not exc 1.5sqm each with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkats exc 1.5sqm and n.exc 4 sqm each with shutters (without taking off shutters from the chowkats or frames) complete all as specified and as directed.

S&F in repair Aluminium alloy anodised barrel tower bolt 100mm long complete all as specified and as directed.

S&F in repair extruded aluminium alloy handle fabricated type anodized 100mm long complete all as specified and as directed.

S&F in repair Aluminium alloy anodised barrel tower bolt 150mm long complete all as specified and as directed.

S&F in repair butt hinges medium weight of size 100mm complete all as specified and as directed.

S&F in repair butt hinges medium weight of size 75mm complete all as specified and as directed.

S&F in repair aluminium alloy butt hinges of size 100mm complete all as specified and as directed.

S & F in repair hydraulic door closer aluminium extruded section body desiganation No-3 universal type ,suitable door shutter width and waight between 61kg to 80kg of approved make, fixed with screws,complete all as specified and as directed.

S&F in repair Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and as directed.

M&L as in repair Double leg aluminium anodised door stopper with rubber foot , ISI marked and fixed with standard aluminium screws complete all as specified and as directed.

M&L cutting holes in brick wall exc half brick but not exc one brick for inserting hold fast and macking good dismanteled portaion in cement mortar 1:4 or cement concret 1:2:4 type B-I complete all as specified and as directed.

S&F hold fasts inserted brick wall complete all as specified and as directed.

S&F II class HW plain solid straight chowkat and frame wrought ,framed rebated on solid rounded or chamfered put together with glue pinned at jointscomplete all as specified and as directed.

S&F 30mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass cut and metered beads and divided into square with plain chamfered or rounded metered and rebated sash bars any numbers size of members of shutters for windows and ventilator as specified complete all as specified and as directed.

S&F 35mm thick II class HW pannel framed shutter of (any number of panels) with panels of timber flat on both sides (feather edged ) or of veneered particale board medium density, wood particale board with commercial face veneers complete all as specified and as directed.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC foam sheet meter cut to two corner and jointed with 2 Nos of 1500mm long bracket of 15x15mm squre tube .the two vertical door profile are to be reinforced with 19x19mm squre tube of 19 gauge EPDM rubber gascut weather seal to be provided through out the frame shall be fixed to wall using 65x100mm long MS screw through the frame by using PVC fastener (including hold fast) and minium of 4 Nos of screw to be provided for each vertical member & 2 Nos for horizontal complete all as specified and as per drawing.

S&F Factory made solid PVC door shutter with particle board core 28 to 30 mm thick (stiles) with 2,4 or 6 raised paneel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face and plain colour PVC 'C' chanel having PVC sheet for top rail ,lock rail & bottom rail panneling, supply and fixing in the frame at site as per specification complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinted tack ,or galvanised wire staple or beading complete all as specified and as directed.

S&F in repair Bib taps, cast copper alloy with handle, chromium plated fancy type, short body with wall flange screwed down, suitable for 15 mm bore pipe complete all as specified and as directed.

S&F in repair PVC low level flushing cistern including brackets 10 litre capacity COMMANDER/SLIM LINE, with inlet ball valve float, handle,flush pipe etc complete all as specified and as directed.

S&F in repairs 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed Make : Gem/Soma/Parko/Seiko) complete all as specified and as directed.

S & F in repair 15mm dia PVC connection 450mm long of approved make fancy type complete all as specified and as directed.

S&F in repair stop valve,/angle valve cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

S&F 15 mm bore GI tube ‘medium grade’ with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.

S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified and as directed.

S&F in repair Stainless steel towel rail 20mm dia 'D' type solid 60cm long between flanges of approved make and pattern, fixed to walls with screws complete all as specified and directed by Engr-in -Charge.

S&F in repairs Aluminium curtain rod 20mm dia fixed including wooden brackets complete all as specified and as directed.

S&F in repair vitreous chaina squating pan orissa parten size 580x 440mm white with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S &F in repair vitreous china Wash down water closet (Padestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and jet, fushing cistern low or high level, 32mm dia polyethylene fush pipe etc complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.led in any mortar complete all as specified and as directed.

Machine cut Kota stone slab flooring 20-25 mm thick, laid over & including 20 mm thick (average thickness) cement mortar (1:6) screed bed and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete all as specified and as directed.

SCHEDULE OF CREDIT

CHANDRA CONSTRUCTION AND CO

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

UNITED BUILDERS

NATIONAL CONSTRUCTION CO

Shree Jayam Enterprises

MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP

Anmol Yash S.D. Construction Pvt. Ltd.

subash chander bahl

M/S N B SEN CONSTURCTION

M/S SWAPAN KUMAR MONDAL