SPECIAL REPAIRS TO INTERNAL WIRING OF BLDG NO 519, SPECIAL REPAIRS TO CERTAIN SECURITY AND SAFETY LIGHTS ALONGWITH ASSOCIATED CABLES AND PROVN OF FLAME PROOF PEDESTAL FANS AT NAVAL STATION KARANJA

Amount

Notes : (i) The work consists of 03 jobs as under:- JOB 'A' : SO(K)/05/2022-23/MInor Works JOB 'B' : SO(K)/25/2022-23/SPL REP E/M JOB 'C' : SO(K)/13/2022-23/SPL REP E/M (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. ITEMS FOR JOB 'A'

Supply only flame proof Pedestal fan, 610mm sweep 24" alongwith plug top complete all as specified and directed. [Make - Sudhir Switchgears Pvt ltd (Cat part No-PF/140) or equivalent in Shyam/Blinga as approved by GE.]

ITEMS FOR JOB 'B'

Taking down carefully copper /aluminum point wiring ( light, fan, socket or power) complete with wiring acessories such as bends, boards, elbows, ceiling fittings, etc and removing material for taking credit (credit for above items will be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. as per existing complete all as specified and directed.

M&L for Point wiring with single core 1100 volts grade 1.5 sqmm size PVC FRLS insulated unsheathed stranded copper conductor cable using color code, controlled by one one-way modular switch, drawn in & including non metallic rigid PVC conduit medium grade not less than 20mm diameter with all conduit accessories in concealed wiring system by cutting of brick/stone walls and making good disturbed surface of wall in CM 1:3 (except on ceiling for fan point where surface casing capping will be used in lieu of concealed PVC conduit) with & including one run of 1.5 sqmm copper conductor as earth continuity wire connected to common earth dolly, concealed sheet steel terminal box of suitable module as required for mounting of modular fittings like switches, sockets, fan regulators etc. and including suitable cover plates complete all as specified and directed for the following :-

One light/ fan/ exhaust fan/ Buzzer point controlled by one switch 5 Amp, SP, one way, 240 volts.

One 5 pin socket outlet 5 Amps on same board

One 5 pin socket outlet 5 Amps on independent board

One light point controlled by two way switch, SP, 5 Amp, 240 Volts

All as per BOQ Serial Item No. 2.02 above but using 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for contineous earth on independent board complete all as specified and directed.

All as per BOQ Serial Item No. 2.02 above but using 4 sqmm (nominal area) for phase and 4 sqmm PVC multistanderd FRLS copper conductor cable for earth continuity ( green colour) for one 15 Amp socket point controlled by 15 Amp switch, SP, one way, 240 Volts & socket complete all as specified and directed.

S&F switch modular single pole, one way, 6 Amp complete all as specified and directed

S&F modular switch, single pole, two way, 6 Amp complete all as specified and directed

S&F modular bell push, flush type, 6Amp complete all as specified and directed

S&F modular socket outlet 15 Amp, 5-in-1, controlled by one switch complete all as specified and directed

S&F modular socket 2 in 1, 3 pin, 6 Amp flush type complete all as specified and directed

S&F switch modular single pole one way, 16 Amp complete all as specified and directed

S&F modular type fan 5 step regulator for ceiling fan complete all as specified and directed

S&F ding dong, door bell, electric suitable for AC 230 volt, single pole complete all as specified and directed

S&F ceiling rose, 3 phase PVC/polycarbonate, isolated body, three terminals complete all as specified and directed.

S&F surface and wall mounted LED batten of 20W with polycarbonate housing & integrated electronic driver having THD<20% complete all as specified and directed

S&F recess mounting LED 2 x 2 luminaire white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission acrylic cover and conecting with ceiling rose complete all as specifed and directed.

S&F pendenent 40 watt tube light type LED down lights with the suspension of 1.5 mtr is included (02 Nos) including fixing arrangement and conecting with ceiling rose complete all as specified and directed

S&F in repairs MCB, SP, 240 V, 50 Hz, 10 KA conforming to IS 8828 of rating 5 to 32 Amp, 'C' series complete all as specified and directed

S&F in repairs MCB double pole SPN 240 volts AC 50 Hz, 10 KA conforming to IS 8828 of rating 40 to 63 Amp, 'C' series complete all as specified and directed

Supply, fixing, stringing and drawing submain wiring with 2 runs of single core 6 sqmm FRLSH PVC insultaed, unsheathed multi stranded copper concuctor cable, 1100 Volts conforming to IS-694 1990 with ISI mark, drawn through and including concealed PVC conduit 20 mm bore size including one run of 6 Sqmm FRLSH PVC insulted multistanded copper conductor cable, 1100 Volts grade conforming to IS -694, 1990 green colour for earth contuinity and connecting up to common earth dolly complete all as specified and directed. Note:- Two run of 6 Sqmm, one run of 6 Sqmm earth wire and one run of PVC conduit will be measured as one running metre.

Supply, fixing, stringing and drawing submain wiring with 4 runs of single core 10 sqmm FRLSH PVC insultaed, unsheathed multi stranded copper concuctor cable, 1100 Volts conforming to IS-694 1990 with ISI mark, drawn through and including concealed PVC conduit 32 mm bore size including one run of 10 Sqmm FRLSH PVC insulted multistanded copper conductor cable, 1100 Volts grade conforming to IS -694, 1990 green colour for earth contuinity and connecting up to common earth dolly complete all as specified and directed. Note:- Four run of 10 Sqmm and one run of 10 Sqmm earth wire will be measured as one running metre

S&F in repairs double door, MCB DB, SP, 240 volts, 200 Amps rated bus bar, 8 way, made out of 18SWG CRCA steel sheets, phosphate powder coated with copper bus bar, earth stud, din rail, polyamide terminal blocks for incoming and outgoing circuits, inbuilt loose wire box, ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection double door open able complete all as specified and directed.

S&F in repairs MCCB distribution board, VTPN, 8 ways, 415 Volts, 50 Hz, AC, double door made out of sheet metal phosphatised and painted with epoxy polyster based powder paints with 200 Amps rated bus bar and earth bar complete all as specified and directed

S&F TPN MCB 415V 10KA 'B' curve miniature circuit breaker (MCB) of 4 poles and 63 Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

S&F in repairs MCB distribution board, TPN, 4 ways, 415 Volts, 50 Hz, AC, double door made out of sheet metal phosphatised and painted with epoxy polyster based powder paints with 200 Amps rated bus bar and earth bar complete all as specified and directed.

S&F in repairs MCCB 4 pole, thermal release range, 100 Amps of breaking capacity 25 kA, 415 Volts, 50 Hz, complete all as specified and directed.

S&F Single pole and neutral (SPN) enclosure with a two pin and earth plug and socket complete with & inluding 1 No. single pole MCB of 20 Amps complete all as specified and directed.

Taking down exhaust fan, sealing cable end, dismentling blades and removing fan and blades to store complete all as specified and directed.

Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan and fixing louvers shutters from outside of the bldg including fixing the louvers complete all as specified and directed.

Taking down ceiling fan and keeping in safe custody for reuse and painting the same and marking of MES number on ceiling fan of size 1200mm sweep complete with connected accessories complete all as specified and directed.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or conccetor to fan complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised iron strip 32x6 mm dia by means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion. Note : The unit rate includes for protection pipe and lead wire from top of earth plate up to 7.5 meter above ground level.

Supply and installation a set of maintanance free earthing system consisting of 6 number of copper bonded earth rod of 17.2mm dia x 2.5 mtr length with coated with 250 micron electrolytic grade copper tested on 25 KA fault current by CPRI with driving head and tip to directly drive the earth rod to the ground with each rod interconnected with 32x6mm copper strip at the interval of 2mtr to form a square complete all as specified and directed. NOTE:- (1) The rate includes testing of earthing system and getting the earthing value less than 1 ohm in any soil condition. (2) Chemical compound not less than 15 Kg for one rod and 90 Kg for 06 Copper rod will be brought by contractor and price of that compound deemed to be include in quoted rate by the contractor. (3) User will provide site for earthing at a distance not more than 7.5m away from where less 1 ohm earth resistance is reqd. (4) Copper Strip of size 32x6mm approx 7.5 RM deemed to be including in quoted rate.

S&F copper strip 32 mm x 6 mm buried in ground or saddle on wall for earth continuity conductor or fixed to porcelain, insulator fixed to wall as in repairs, complete all as specified and directed.

ITEMS FOR JOB 'C'

Taking down existing street light/ flood light/ high mast/ Solar light fitting any type any wattage for replacement of new light fitting complete all as specified and directed.

All as per above BOQ Serial Item no 3.01 above but Garden light /decorative light/ post top lantern/ Bolard type fitting, etc complete all as specified and directed.

S&F 180 W LED floodlight luminaire with ultra sleek, light weight and with secondary optics, made of pressure die-cast housings with IP66 ingress protection and impact resistance of IK07. 4kV inbuilt and 10kV*external surge protection complete all as specified and directed.

S&F LED post top 45 W New generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. LED CCT is 5700 K & post top light having inbuilt driver with suitable surge protection. Clear Cover offers bright illumination for different applications complete with all accessories complete all as specified and directed.

S&F 9 W LED Bollard fitting of size 600 mm with New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape luminaire for diffused lighting with high power as light source of size 600 mm complete with all accessories, LED CCT is 5700 K & bollard light having inbuilt driver with suitable surge protection and making PCC suitable foundations complete all as specified and directed.

S&F Blue colour LED flood light 30W 230 V AC Outdoor type with thermal management in multilpe optics and equipped with IP 66 protection, with impact and corrosion resistant including fixing arragement with nut, bolt and clamp with suitable accessories complete with driver and lamp complete all as specified and directed. Note : PCC foundation required for pole is deemed to be included in the item rate with grade M15/20 of 1:2:4 type alongwith angle iron requried for fixing of flood light fitting.

S&F Green colour LED flood light 30W 230 V AC Outdoor type with thermal management in multilpe optics and equipped with IP 66 protection, with impact and corrosion resistant including fixing arragement with nut, bolt and clamp with suitable accessories complete with driver and lamp complete all as specified and directed . Note : PCC foundation required for pole is deemed to be included in the item rate with grade M15/20 of 1:2:4 type alongwith angle iron requried for fixing of flood light fitting.

S&F Yellow colour LED flood light 30W 230 V AC Outdoor type with thermal management in multilpe optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp including fixing arragement with nut, bolt and clamp with suitable accessories complete all as specified and directed. Note : PCC foundation required for pole is deemed to be included in the item rate with grade M15/20 of 1:2:4 type alongwith angle iron requried for fixing of flood light fitting.

S&F 3 Mtr Galvanised iron post top decorative pole with inbuilt Junction box. ERW GI pipes 'B' class with base plate 10 mm with aluminium embellishments at bottom and middle for asthetic. The pole is duly PU coated in black and embellishments in Golden shade complete all as specified and directed Note : PCC foundation required for pole is deemed to be included in the item rate with grade M15/20 of 1:2:4 type.

S&F decorative luminaire made of spun aluminium body with pressure die- cast heat management (PDCHM) and the IP 65 optical compartment with high power LEDs is comprised of a deep drawn chemically polished and co - extruded, thermofrmed polycarbonate protector stabilized agent UV rays suitable for 30 Watt LED. Fitting should be hanging type decorative fixture. Fitting should have inbuilt driver with efficiency >0.9 and having surge protection device of 4KVA and external surge protection device of 10KVA, colour temperature 3000K .Natural day light LED completed all as specified and directed.

Supply, fixing, stringing and drawing submain wiring with 4 runs of single core 6 sqmm PVC insultaed, unsheathed multi stranded copper concuctor cable, 1100 Volts conforming to IS-694 1990 with ISI mark, drawn through and including concealed PVC conduit 20 mm bore size including one run of 10 Sqmm PVC insulted multistanded copper conductor cable, 1100 Volts grade conforming to IS -694, 1990 green colour for earth contuinity and connecting up to common earth dolly complete all as specified and directed. Note:- Four run of 6 Sqmm and one run of 6 Sqmm earth wire will be measured as one running metre

Supplying, laying, jointing, connecting & testing 4 core, 16 Sqmm XLPE, PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor in trenches / ducts including taking out cable complete all as specified and directed

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25cm complete all as specified & directed.

Removing excavated materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the Starting point all as specified and directed .

M & L for dry river sand as sand cushioning for protection of UG cable including punning of sand in layers complete all as specified and directed.

Supply & laying un-reinforced precast concrete cable cover class LV type 1, flat size 250mm x 150mm x 40 mm complete all as specified and directed.

S&F UPVC pipe 15 mm bore fixed complete to walls, pillar etc., for conduit of wire with all fittings complete & saddling of pipe in pillar with clamp complete all as specified and directed.

S&F GI pipe medium grade 40 mm bore with all fittings complete laid in trenches complete all as specified and directed.

M&L for street light bracket 1.5 mtr long made out of 40mm dia medium grade GI tube one and duly welded with 100mm dia 30 cm long GI tube including provision of 4 Nos holes duly threaded for fixing the bracket on the top of existing poles with complete including arrangment of threading, welding and painting work required for fixing of street light fitting complete all as specified and directed.

S&F 2.5 sqmm FRLSH PVC insulated single core unsheathed industrial multistrand cable with flexible bright annealed bare copper conductor for voltage grade upto 1100 V confirming to IS-694:2010 complete all as specified and directed.

S&F 40 mm outer dia, double wall corrugated (DWC) duct pipe conforming to IS 16205 (Part 24) with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and directed.

S&F Cable Junction Boxes IP 66,weather proof, for outdoor installation of size 205mm x 255mmx112 mm complete with electrolytic aluminum bus bar suitable cable size 10-25 sqmm for 3 phase and neutral fixed on ebonite insulator and one no. SPN 6-16 A complete all as specified and directed.

S&F high brightness day light visibility LED Display board of size 1X 5.5 feet for outdoor usage ,water proofing of LED display ,made of Mild steel body with openable cabinet, software of Windows based editable user friendly software/ mobile, based on USB pen drive programming and alongwith wifi connectivity complete all as specificed and directed .

M.K Enterprises

ENJOY

R A Electric Co.